**** BEGIN LOGGING AT Sun Dec 27 02:59:56 2009 Dec 27 04:05:35 is there anyway to change the address from 192.168.0.200? Dec 27 05:56:19 okay, i found that 192.168.0.200 is set as the address in /init.gta02.rc Dec 27 05:56:29 how does one over write that file? Dec 27 06:05:16 nevermind, i seem to have found how to do it Dec 27 11:49:02 ponies Dec 27 12:07:23 hi@all Dec 27 12:08:27 hi Dec 27 13:18:57 Serdar: ich haette mal ne frage zum neuen eclaire release... ich habe qi als udna per dfu-util auf den gta02 geflasht, bekomme beim booten aber keine auswahl. zudem habe ich den weekly build von der gcode-projekt seite herunter geladen und je alles auf die 2 partitionen der sd-karte gemacht. beim booten bekomme ich aber fehler mit "init: /system/". muss ich das system.img noch auf den freerunner flashen als rootfs? Dec 27 13:32:09 huibuh, this is an english channe. Dec 27 13:32:50 l Dec 27 13:33:01 Serdar: ok, well i thought... so i think i should post it to all? :-) Dec 27 13:33:57 in english of course Dec 27 13:37:06 so, as we speak i'm playing around with my freerunner and the new eclaire release. i already flashed qi as udna via dfu-util on my gta02 but there is no menu for qi. anyway i tried the weekly build from gcode-project site and copied it on both 2 partitions on my sd-card. as i boot my freerunner there are only error messages saying: "init: /system/". do i have to flash the system.img onto my freerunner as rootfs as well? Dec 27 13:39:20 there is no need to flash them, it does flash itself Dec 27 13:40:06 run nor and use boot from disk Dec 27 13:40:17 btw. better to use my latest daily aboput eclair Dec 27 13:40:27 s/about/of Dec 27 13:43:35 on your own webhost there's no file to download... so where can i get it? Dec 27 13:45:36 oh... sry wrong directory *ashamed* Dec 27 14:20:09 jancona, can we add gesture builder as an external project? Dec 27 14:32:43 Serdar: i tried your daily eclaire build, but the same errors occur. this time i didn't install anything and just used the sd-card as boot-media. Dec 27 14:33:37 which partition do you have? Dec 27 14:33:57 1 partition vfat and 1 ext2 Dec 27 14:34:25 and which partiton do you use? Dec 27 14:35:29 ehm... i do the menu-thing "boot from sd-card fat+ext2" Dec 27 14:36:21 but this doesn't work, after checking the kernel i get a crc error. after that i do "reboot" and then i see "android _" and 2 secs later the errors occur Dec 27 14:36:54 yeah but which partition do you use for unpacking? Dec 27 14:36:59 both Dec 27 14:37:06 for failsafe Dec 27 14:37:09 oO" Dec 27 14:37:20 only vfat the first parition Dec 27 14:37:49 i copied the extracted tar onto both partitions :) Dec 27 14:39:18 only vfat. Dec 27 14:39:43 and I am building a new eclair now. Dec 27 14:39:45 so only one partition is needed? Dec 27 14:39:49 hi panicking Dec 27 14:40:17 you only ectract it to first vfat partition. Dec 27 14:42:44 hm ok, i'll try Dec 27 14:44:09 wait few minutes. Dec 27 14:44:54 jepp, i wait for your release but i repartition and reformat the sd-card, before i try your release ;) Dec 27 14:57:50 Serdar: is your build done? Dec 27 16:10:18 yes it is Dec 27 16:15:15 i ttied already but the same thing with booting from sd... crc error with kernel Dec 27 16:15:30 -tt +tr Dec 27 16:15:32 huh. Dec 27 16:15:55 I think you are doing something wrong. Dec 27 16:16:12 maybe my gta02 is broken? is there any possibility to bring it back to factory settings? Dec 27 16:17:01 debug board. Dec 27 16:18:06 hmm i would have to get one via pulster and as i'm not a devel-guy i would be more nervous to break it by doing such stuff... Dec 27 16:22:51 is there any possibility to override the kernel with zero's? maybe there's an old testing-shr kernel still on nand Dec 27 16:31:14 pulster got it cheaper now. Dec 27 16:34:15 i'm right now on christoph's site Dec 27 16:35:26 christoph? Dec 27 16:35:39 christoph pulster ;-) Dec 27 17:10:12 i'm just trying to flash the old om2008 kernel and rootfs onto it. maybe the bugs will also be "overridden". and then hopefully the eclair will boot Dec 27 17:20:00 argh... even om2008 won't boot. i think my moko is broken... Dec 27 17:49:23 whaha. Dec 27 17:49:31 reflash qi again. Dec 27 17:49:38 maybe it's not. Dec 27 18:04:06 i tried it with the qi udna from openmoko.org/andy but still the same error Dec 27 18:04:34 and before i reflashed it i resetted the u-boot-environment by using the tut on the wiki Dec 27 18:29:22 hmm after flashing the trimarchi "freeerunner-eclair-v2.jffs2" and the uImage-eclair.bin onto my freerunner i get at least a broken android-picture :-D but it hangs... Dec 27 18:44:45 still did, so i turned it off... my moko doesn't like me Dec 27 20:15:33 did someone tried to connect with a macbook? Dec 27 22:15:44 jancona, ping? **** ENDING LOGGING AT Mon Dec 28 02:59:57 2009