**** BEGIN LOGGING AT Thu Jun 07 02:59:58 2007 Jun 07 03:18:18 CoreDump|afk: ping Jun 07 03:18:55 pong Jun 07 03:21:04 summatusmentis: shoot Jun 07 03:21:54 CoreDump|afk: in order to use multiple partitions w/ altboot, I only need the one kernel right? and I can just untar an hdimage1.tgz onto the partition? Jun 07 03:22:49 correct Jun 07 03:23:12 you could use .ext2 loop-images as well Jun 07 03:23:20 ok, that makes it easy. I'm looking into testing various other versions of angstrom(xfce, e17, opie) Jun 07 03:23:30 I could, but I've got 6Gb, why not use it? :-P Jun 07 03:23:37 right =D Jun 07 03:23:44 alright, thanks Jun 07 03:23:47 np Jun 07 03:24:15 did I see that a full version of altboot was in OE? or just updated? Jun 07 03:24:28 just updated Jun 07 03:24:34 ok, cool Jun 07 03:26:36 btw: you probably want to install the "real" tar before trying to extract a hdimage Jun 07 03:28:58 oh, good to know, thanks Jun 07 03:37:55 CoreDump|afk: and once the partitions are created, and the hdimage is extracted, from there altboot will take care of booting it? Jun 07 03:38:27 after you select the new partition to be booted Jun 07 03:38:44 either on boot by pressing a key when altboot is launched Jun 07 03:38:52 or at runtime by running /sbin/altboot Jun 07 03:39:01 right, ok, that's just what I was trying to make sure of Jun 07 03:39:20 I don't wanna be messing around w/ pivot-boot, or kernel args, or anything like that :-P Jun 07 08:04:54 morning Jun 07 08:05:16 morning XorA ^^ Jun 07 08:05:45 hey Furre dude Jun 07 08:07:22 ^^, aww, have to leave, have a lovely day ^^ *poffles afk* Jun 07 08:07:44 have a good one Jun 07 09:04:32 Laibsch, feel free to add altboot to machines once someone can confirm it works Jun 07 09:04:51 per machine Jun 07 09:22:21 OK Jun 07 11:30:38 koen: I enabled altboot for the spitz for now. Jun 07 11:30:46 I'll probably test for collie later Jun 07 13:42:36 hrw: Do you have wpa on the Linksys WRT? Jun 07 13:44:35 yes Jun 07 14:01:00 I have to admit your tutorial is not so easy to understand Jun 07 14:02:24 you need to edit wpa_supplicant.conf for it Jun 07 14:02:42 or if you use one network then you can go Debian way and enter all in /etc/network/interfaces Jun 07 14:12:58 one network = bridge mode Jun 07 14:12:59 or Jun 07 14:13:13 one network = never connect to other networks from the Z? Jun 07 14:15:24 Laibsch: second Jun 07 14:44:55 koen: I just uploaded http://www.angstrom-distribution.org/unstable/feed/unsorted/qpf-unismall-100_1.0.0-r2_all.ipk Jun 07 14:44:59 Is that correct? Jun 07 18:49:48 Zero_Chaos: did you experience any problems with the ralink sticks on your angstrom? my iwconfig segfaults sometimes with rt73. Also the device is recognized, module loads and a rausb0 interface is being created. Thing is I can't do nothing with it. Not even up it Jun 07 19:01:22 Hi when trying bitbake busybox I get an error when task glibc-intermediate-2.5-r6 is running saying that LD_LIBRARY_PATH contains the current directory. Anyone know how to get past this? Jun 07 19:03:59 my script has LD_LIBRARY_PATH= in it Jun 07 19:04:03 to setup env Jun 07 19:04:22 dont know if you have an LD_LIBRARY_PATH set in global vars before using bitbake Jun 07 19:05:14 XorA: I do but the current directory is not in the list Jun 07 19:06:11 Is there a way to be able to use a printer that's located in a Windows-network? o.o, sorry, probably terrible explenation x.x Jun 07 19:06:42 XorA: ok I set LD_LIBRARY_PATH to empty and tried again...seems to be getting somewhere now Jun 07 19:07:06 XorA: Thanks XorA Jun 07 19:10:18 Furre: there should be Jun 07 19:10:38 Furre: but whether the foomatic driver stuff works I dont know Jun 07 19:10:48 Furre: koen probably only person who tried Jun 07 19:11:37 you rang m'lord? Jun 07 19:14:16 ah, well, I kinda need to somehow log into a windows network, and use a printer, is it possible with the Z? Jun 07 19:14:27 Ive tried Samba but I cant seem to be able to get it working as it should, nothing happens :x Jun 07 19:18:22 koen: printing from Angstrom, I beleive you tried it Jun 07 19:19:51 yes, using plain cups Jun 07 19:20:54 * XorA is too much of a lazy bum to setup Z printers Jun 07 19:21:26 whats plain cups? o.o Jun 07 19:22:55 ipkg install cups Jun 07 19:23:00 Common Unix Printing System Jun 07 19:23:00 then print to a network printer Jun 07 19:23:19 Furre: goto localhost:631 on a browser on your Z Jun 07 19:23:53 ok Jun 07 19:24:30 err "unspoported localhost" Jun 07 19:24:33 goign to try another browser Jun 07 19:25:48 hmm, I get nothing at all, what should I get XorA? Jun 07 19:29:47 Furre: did you ipkg install cups, I thought it was there by default, but I am often mistaken Jun 07 19:31:06 Furre: my Z tends to get a lot of stuff on it by accident Jun 07 19:31:23 hehe, my Z tends to lack almost everything by default x.x, ebil setupprogram :x Jun 07 19:34:25 hmm, is it cups or cupsclient? Jun 07 19:34:41 * XorA is just lucky there is a 6 gig disk to fill with crap Jun 07 19:35:03 lol akita flash rules Jun 07 19:35:07 hehe, I just got 64 or what it is ._. Jun 07 19:35:28 me too Jun 07 19:35:54 XorA: how can I commit -or whatever you call that- the rt73 package? Jun 07 19:35:56 but its good, get better batterylife ^^ Jun 07 19:36:05 yea that's true Jun 07 19:36:07 and also, using SD card as storage is good too :) Jun 07 19:36:19 but I guess it depends on what one is used to :) Jun 07 19:36:39 I have a 2gb atm Jun 07 19:37:34 I have 512 ^^, but UltraII ^^ Jun 07 19:41:28 dcordes: can you confirm it works if you have firmware in right polace? Jun 07 19:42:10 ok, installed it now, what should I do now XorA? Jun 07 19:42:44 XorA: definetly Jun 07 19:42:54 100 % ok Jun 07 19:43:09 just put rt73.bin in /etc/firmware and you have a working interface Jun 07 19:43:22 which is located in the tarball from the official project website Jun 07 19:44:15 dcordes: youll have to find docs Jun 07 19:44:26 what docs? Jun 07 19:44:33 dcordes: ok in that case I shall upload tomorrow Jun 07 19:45:15 XorA, is there a way to start cups? =) Jun 07 19:45:25 dcordes: never mind I was thinking something different Jun 07 19:45:31 XorA: ok do you want me to send it now or tomorrow? Jun 07 19:45:43 Furre: /etc/init.d/cup start I thinl Jun 07 19:46:06 dcordes: no I can build it at work, I had to build for akita to get you that kernel Jun 07 19:46:28 ok i see Jun 07 19:46:30 dcordes: luckilly work has a monster dual xeon Jun 07 19:47:40 sounds good Jun 07 19:48:14 I have to shutdown my monster now ^ Jun 07 19:48:18 bye all Jun 07 19:49:52 x.x, ebil Z, Ill just try to reinstall the Z again Jun 07 20:00:26 thats wierd, didnt get anything about calibration the screen this time, anyone know howto do it after ångström has been installed? Jun 07 20:01:02 nevermind, found it ^^ Jun 07 20:03:13 and now wificard wont work again *sighs* Jun 07 20:03:48 does anyone know where the X server DISPLAY variable is set? Jun 07 20:16:18 XorA: Thanks again the compiler is almost finished buildin now Jun 07 20:20:02 XorA: http://techn.ocracy.org/telekinesis/wiki/TechnicalDetails Jun 07 20:20:21 XorA: mdns jabber would be cool for meetings :) Jun 07 20:20:49 koen: cool Jun 07 20:24:00 anyone know howto get the cf-wifi card working in ångström? only says [CD] on the status Jun 07 20:25:13 define "the" and "working" Jun 07 20:26:41 The: Ambicom CF-wifi card, and working: well, the opposite for what its doing now; nothing :) Jun 07 20:26:54 I know Ive had it working before but have forgot how I did x.x Jun 07 20:27:23 doesnt say anything about VCC, CPP or WP Jun 07 20:30:49 sorry if it sounds like im in a bad mood, cause well I am, too hot for my brain to work as it should, I apologize ^^ Jun 07 20:33:12 wierd, ltg has a sharprom archive Jun 07 20:41:37 Furre: sorry I am here there and everywhere trying to pack at the moment Jun 07 20:41:58 koen: pig Jun 07 20:41:58 ping* Jun 07 20:42:33 not suggesting anything, just my 'n' key is iffy Jun 07 20:43:05 XorA, its fine, Ill be gone during the weekend but maybne you can try to help me next week? ^^ Jun 07 20:57:43 summatusmentis, ;-))) Jun 07 20:57:59 polyonymous: it was an accident Jun 07 20:58:10 freudian slip? Jun 07 20:58:29 lol, no, I don't know koen well enough to even make that assertion Jun 07 20:58:34 purely just a keyboard error Jun 07 20:58:50 summatusmentis, well, I don't know what you ping him, maybe that's why :) Jun 07 20:59:10 !oebug 2435 Jun 07 20:59:12 * * Bug 2435, Status: NEW, Created: 2007-06-07 13:41 Jun 07 20:59:13 * * summatusmentis(AT)gmail.com: wifi-radar linking to the packagers' system Jun 07 20:59:14 * * http://bugs.openembedded.org/show_bug.cgi?id=2435 Jun 07 20:59:21 polyonymous: that's why Jun 07 20:59:32 ah Jun 07 21:00:36 well, that would explain your feeling. You try to run something, instead of expected results you see koen's name and pig him :) Jun 07 21:00:56 lol, IT WAS AN ACCIDENT!!! Jun 07 21:01:11 summatusmentis, tried to install pycairo? Jun 07 21:01:16 or whatever the name is. Jun 07 21:01:47 for what I understand koen datadir is not where it looks for cairo, but rather where it thinks cairo is called on from. Jun 07 21:02:03 no, I assumed it would be a dep? Jun 07 21:02:47 summatusmentis, it should be, but I'd rather try to install it manually and see if it helps. Jun 07 21:03:01 and if it does I'd go as far as suggesting to add it. Jun 07 21:04:21 ok, I didn't get the previous error anymore, but now it segfaults :-P Jun 08 01:56:36 does anyone know how the DISPLAY variable is set? Jun 08 01:57:52 I assume it's set by /usr/bin/X when launched.. Jun 08 01:58:18 NAbyss: ok, what's the default? Jun 08 02:00:02 summatusmentis: Depends what display number it's on Jun 08 02:00:25 usually :0 Jun 08 02:00:31 The format is [hostname]:display[.numberthatIcan'tremember] Jun 08 02:00:35 Default display is 0 Jun 08 02:00:38 so typically :0 Jun 08 02:00:42 or localhost:0 Jun 08 02:00:59 ok, I'm just trying to get e17 running, from a console image, w/ the package task-e-x11 **** ENDING LOGGING AT Fri Jun 08 02:59:56 2007