**** BEGIN LOGGING AT Wed Jun 20 02:59:58 2007
Jun 20 12:40:46 <summatusmentis> what's the machine setting for building a 5500 image?
Jun 20 12:42:39 <koen> ~5500
Jun 20 12:42:53 <koen> what's the dog name for the 5500?
Jun 20 12:43:05 <_law_> koen, collie
Jun 20 12:43:19 <koen> so the machine setting is 'collie'
Jun 20 12:43:23 <Laibsch> yes
Jun 20 12:44:01 <summatusmentis> ugh, I suck, that's not what I meant. I just got up, sorry
Jun 20 12:44:17 <summatusmentis> the DISTRO target is what I'm looking for, oabi vs. eabi
Jun 20 12:44:57 <koen> DISTRO="angstrom-2007.1"
Jun 20 12:46:13 <summatusmentis> koen: I thought there was something specific about the collie image, I thought I remembered something about <distro target>-oabi, or something like that
Jun 20 12:46:29 <Laibsch> not any more
Jun 20 12:46:38 <Laibsch> thanks to koen, who I think fixed this
Jun 20 12:46:59 <summatusmentis> I see, excellent. Is the SD driver included in the kernel build?
Jun 20 12:47:03 <Laibsch> yes
Jun 20 12:47:26 <Laibsch> but IIRC it is set to debug which makes it slow
Jun 20 12:47:44 <summatusmentis> is there a way to 'unset' that?
Jun 20 12:48:45 <Laibsch> Yes
Jun 20 12:48:50 <Laibsch> do I know where?
Jun 20 12:48:53 <Laibsch> not off-hand
Jun 20 12:48:58 <summatusmentis> lol, alright
Jun 20 12:56:31 <koen> Laibsch: there's on bug left in the oabi selector, for which I'm testing a fix right now
Jun 20 12:57:20 <koen> as arieh noticed, machine specific packages get 'arm-oabi' as arch instead of ${MACHINE_ARCH}
Jun 20 13:00:00 <Laibsch> that guy is a relentless hound ;-)
Jun 20 13:00:18 <Laibsch> hound dog
Jun 20 13:00:38 <Laibsch> he will find every little detail that is broken, great.
Jun 20 13:01:14 <koen> he used to find a lot of PEBKAC
Jun 20 13:02:04 <Laibsch> I know
Jun 20 13:02:06 <Laibsch> ;-)
Jun 20 13:02:19 <Laibsch> But I think you have to tolerate that
Jun 20 13:02:53 <Laibsch> I am willing to do it for people who keep to a well-mannered conversation and who are willing to learn
Jun 20 13:03:15 <Laibsch> PEBKAC sometimes also hints at ways you could make the distro easier, grandma-compatible
Jun 20 13:04:41 <koen> I dislike him mailing me a zillion times about how he couldn't login to the *linuxtogo* wiki because the drupal at the angstrom site didn't give him a password
Jun 20 13:05:40 <Laibsch> yes, that one was hilarious
Jun 20 13:05:48 <Laibsch> I also received one or two mails like that
Jun 20 13:06:16 <koen> I couldn't figure out an appropriate response, so I sent the mails to /dev/null
Jun 20 13:10:41 <koen> oabi users: mtn pull ; mtn up
Jun 20 13:11:55 <hrw> koen: please add ANGSTROM_ABI = "oabi" way too
Jun 20 13:12:16 <Crofton> ~lart thunderbird
Jun 20 13:12:22 <koen> if that does what I think it does, no
Jun 20 13:13:13 <koen> I don't want to get into the business of supporting binary only crappy vendor kernels
Jun 20 13:13:34 <hrw> koen: or <2.6.16 ones
Jun 20 13:13:58 <koen> same difference
Jun 20 13:14:47 <hrw> ok
Jun 20 13:14:52 * hrw goes to shop
Jun 20 14:02:32 <summatusmentis> koen: so just bitbake angstrom-x11-image should work fine for an oabi machine now right?
Jun 20 14:02:41 <koen> yes
Jun 20 14:02:58 <summatusmentis> alright, great! thanks koen 
Jun 20 14:03:06 <koen> apart from the fact it won't fit in 14MB of flash
Jun 20 14:03:31 <summatusmentis> oh damn... is there a minimal image?
Jun 20 14:35:50 <dcordes> Laibsch, could you help me again with the rootfs on SD?
Jun 20 14:36:14 <dcordes> I compiled angstrom-x11-image to jffs.rar.gz as you said with those two settings in the local.conf
Jun 20 14:36:46 <dcordes> now how do I put this onto the card? (also I have several tars in deploy and I don't know which one to take)
Jun 20 14:39:06 <Laibsch> dcordes: read the log
Jun 20 14:39:19 <Laibsch> ~logs
Jun 20 14:39:20 <dcordes> Laibsch, could you give me the link again?
Jun 20 14:39:22 <dcordes> thanks
Jun 20 14:39:34 <Laibsch> !logs
Jun 20 14:39:34 <cdbot2> Channel logs for #angstrom are archived at:
Jun 20 14:39:36 <cdbot2> http://hentges.net/tmp/logs/irc/%23angstrom
Jun 20 14:39:37 <cdbot2> Live-logs are available at
Jun 20 14:39:39 <cdbot2> http://hentges.net/tmp/logs/irc/livelogs/%23angstrom.livelog
Jun 20 14:39:41 <cdbot2> See ?? help-logs for usage instructions
Jun 20 15:00:46 <dcordes> How does CoreDump|afk realize that live log? Does he have an irc client which parses the text directly to his webserver?
Jun 20 15:01:45 <koen> I suspect cdbot takes care of that
Jun 20 15:07:48 <summatusmentis> koen: is there a minimal x11 image?
Jun 20 15:07:55 <summatusmentis> one that will fit on 5500 flash?
Jun 20 15:08:31 <Laibsch> summatusmentis: "ls -l packages/images/ packages/angstrom"
Jun 20 15:08:34 <Laibsch> or something like that
Jun 20 15:08:43 <Laibsch> or "locate image"
Jun 20 15:08:56 <summatusmentis> Laibsch: thats the .bb files for the image right?
Jun 20 15:10:38 <Laibsch> yes
Jun 20 15:10:46 <Laibsch> and you can always see what images you can build
Jun 20 15:10:55 <summatusmentis> alright got it
Jun 20 15:11:12 <summatusmentis> hrm... suggestions for a 5500 target then? console image looks to be the only one that might fit
Jun 20 15:14:10 <hrw> right
Jun 20 15:39:57 <koen> http://www.angstrom-distribution.org/repo/ no can limit searches by architectures
Jun 20 15:59:11 <koen> now*
Jun 20 20:31:17 <erdinger_> ~logs
Jun 20 20:31:27 <erdinger_> ~log
Jun 20 20:31:46 <thesing> erdinger_: no ibot here.
Jun 20 20:32:24 <thesing> erdinger_: try http://www.hentges.net/tmp/logs/irc/
Jun 20 20:33:29 <koen> !logs
Jun 20 20:33:30 <cdbot2> Channel logs for #angstrom are archived at:
Jun 20 20:33:31 <cdbot2> http://hentges.net/tmp/logs/irc/%23angstrom
Jun 20 20:33:32 <cdbot2> Live-logs are available at
Jun 20 20:33:33 <cdbot2> http://hentges.net/tmp/logs/irc/livelogs/%23angstrom.livelog
Jun 20 20:33:35 <cdbot2> See ?? help-logs for usage instructions
Jun 20 20:35:16 <erdinger_> already thanks, I bookmarked it. Unfortunately logs didn't help me with my problem, putting my recently built angstrom-x11-image jffs .tar.gz image on card and booting it from there. Do I need to extract the whole tar.gz to the card and I'm set? (altboot is already installed from my current angstrom flash.) Ma machine is c1000 akita
Jun 20 20:35:43 <hrw> hi
Jun 20 20:35:51 <hrw> erdinger_: put jffs2 file as initrd.bin
Jun 20 20:36:30 <thesing> erdinger_: you have to extract it. and your card has to be ext2 formated.
Jun 20 20:36:45 <thesing> hrw: he wants sd card as root.
Jun 20 20:37:16 <hrw> ah. then no idea
Jun 20 20:37:36 <erdinger_> right
Jun 20 20:38:03 <erdinger_> thesing: http://www.pastebin.ca/579771 that's what I got after building. Which of these do I have to extract to an ext2 fs on the SD?
Jun 20 20:39:09 <thesing> erdinger_: x11-image-akita.tar.gz (should be a symlink to one of the other files)
Jun 20 20:40:04 <thesing> erdinger_:  .jffs2 is for flashing and .ext2.gz is an image you can use with loopback.
Jun 20 20:40:23 <thesing> erdinger_: AFAIK altboot supports that too. 
Jun 20 20:41:02 <erdinger_> thesing: all I know is that it was asking for an loopback either or extracted fs on my card
Jun 20 20:42:25 <thesing> erdinger_: it's your choice: you can extract the tar.gz to the card and use the card as root or you can gunzip the ext2.gz put it to the card and use the image as root.
Jun 20 20:42:58 <erdinger_> thesing: what I want is everything from card.
Jun 20 20:44:22 <erdinger_> thesing: gunzip: x11-image-akita.tar.gz: Too many levels of symbolic links uuh
Jun 20 20:45:14 <erdinger_> thesing: how can I figure out where that file is pointing to, so I can extract it?
Jun 20 20:45:21 <thesing> erdinger_: try 'tar xzf x11-image-akita.tar.gz' -C /path/to/your/card'
Jun 20 20:45:43 <thesing> erdinger_: ls -l x11-image...
Jun 20 20:47:26 <erdinger_> thesing: ok that worked
Jun 20 20:47:55 <erdinger_> thesing: So extracting the x11 image tar is all I need to work completely from card, independend from flash?
Jun 20 20:49:53 <thesing> erdinger_: this and configure altboot. But I don't know about altboot. never tried it.
Jun 20 20:51:23 <erdinger_> thesing: no success. - I already got the problem. My ext2 card partition is the second one. Guess altboot tries booting from the first one since it can't find any ext2 there..
Jun 20 20:52:59 <thesing> erdinger_: AFAIK it tries the first partition. Maybe one could change that. But it would be easier to repartition the card.
Jun 20 20:54:37 <erdinger_> thesing: that's what I'm doing right now. Kind of annoying since nautilus always remounts the card
Jun 20 21:06:18 <erdinger_> partitioning is a pita it is always making weird problems
Jun 20 21:06:31 <erdinger_> partitioning sd  cards I mean
Jun 20 21:10:25 <hrw> someone here has prism based cf wifi card?
Jun 20 21:10:51 * thesing has a prism 2.5
Jun 20 21:11:21 <hrw> which firmwares?
Jun 20 21:11:29 <hrw> "hostap_diag wlan0" will tell
Jun 20 21:13:24 <thesing> http://www.pastebin.ca/579849
Jun 20 21:13:51 <thesing> hrw: wpa works fine if thats your next question.
Jun 20 21:14:11 <hrw> no it is not
Jun 20 21:14:56 <hrw> I am making script which load newer firmware into RAM so users of card with old firmware will be able to connect to WPA
Jun 20 21:15:44 <thesing> hrw: I think I flashed the newest firmware I could find.
Jun 20 21:16:01 <hrw> you did
Jun 20 21:16:41 <erdinger_> hrw: hey prism2 here
Jun 20 21:16:44 * erdinger_ waves
Jun 20 21:17:00 <hrw> erdinger_: "hostap_diag wlan0" then
Jun 20 21:17:14 <erdinger_> a second I'm struggeling to format my card
Jun 20 21:18:07 <hrw> ok
Jun 20 21:19:45 <thesing> hrw: just tried rc4 without mm-patches. Boots fine.
Jun 20 21:20:34 <hrw> great
Jun 20 21:20:45 <hrw> thesing: input-power patch updated?
Jun 20 21:22:16 <thesing> hrw: no I dropped it. I don't use this on collie. (And imo other zauri shouldn't too.)
Jun 20 21:23:29 <hrw> thesing: discuss this with RP - he will be back on Tuesday/Wednesday
Jun 20 21:52:44 <XorA|gone> hrw: will your script handle prism3 cards as well and replace the current rather dodgy script
Jun 20 21:52:57 <XorA|gone> hrw: if so I shall get to getting you those id's tomorrow
Jun 20 21:54:48 <XorA|gone> oh I see you asked for prism 3 over --->
Jun 20 21:55:02 <hrw> XorA|gone: if you will give me also firmwares which works
Jun 20 21:55:32 <XorA|gone> hrw: the one we ship in the images now seems to work for me, I never tried WPA though
Jun 20 21:56:04 <hrw> XorA|gone: NICID will show which one is needed
Jun 20 21:56:55 <XorA|gone> hrw: getting it now
Jun 20 21:57:27 <XorA|gone> hrw: of course I cant get the ID for the SanDisk card #:-)
Jun 20 21:58:03 <hrw> XorA|gone: even NICID?
Jun 20 21:58:06 <hrw> ;(
Jun 20 21:58:27 <XorA|gone> hrw: hard lockup in kernel, which now I got serial I can debug
Jun 20 21:59:05 <hrw> ah
Jun 20 21:59:10 <XorA|gone> NICID: id=0x801d v1.0.0 (PRISM III (AT24C08 compatible small serial flash))
Jun 20 22:00:07 <hrw> thx
Jun 20 22:00:18 <XorA|gone> ill do WCF12 while Im at it
Jun 20 22:00:35 <XorA|gone> Ill reply to email so other know what is done
Jun 20 22:00:51 <hrw> XorA|gone: and it works with sf010804.hex? it is not for that card ;)
Jun 20 22:02:23 <XorA|gone> works perfect
Jun 20 22:02:40 <XorA|gone>  /etc/pcmcia/rf010804.hex
Jun 20 22:03:08 <hrw> according to official doc it should use rm*.hex firmwares but they do not exists
Jun 20 22:04:32 <hrw> XorA|gone: http://linux.junsun.net/intersil-prism/ -  can you mail that guy with output and info that rf* firmwares works on 801d cards?
Jun 20 22:05:39 <XorA|gone> hrw: mail to angstrom with my two NICID
Jun 20 22:05:47 <hrw> thx
Jun 20 22:06:49 <CoreDump|afk> dcordes: cdbot2 is indeed (ab)used to create the live logs
Jun 20 22:06:57 <CoreDump|home> hi
Jun 20 22:07:01 <dcordes> CoreDump|home, :) ok hi
Jun 20 22:08:22 <hrw> XorA|gone: wcf12 no problem
Jun 20 22:09:28 <XorA|gone> hmm, according to that page we should be using 1.7.4 not 1.8.4
Jun 20 22:10:23 <CoreDump|home> 1.8.4 == latest available firmware
Jun 20 22:10:44 <XorA|gone> CoreDump|home: read on and it says its buggy especially with old cards
Jun 20 22:10:46 <CoreDump|home> 1.8.2 is recommended as users reported problems w/ 1.8.4 on some cards
Jun 20 22:10:52 <CoreDump|home> =)
Jun 20 22:11:08 * CoreDump|home flashed 1.8.2 / 1.1.1 a week ago, works perfectly
Jun 20 22:11:20 <hrw> my card has 1.1.1/1.8.4 and works
Jun 20 22:11:29 <hrw> second has 1.1.1/1.7.4 and works too
Jun 20 22:11:49 <CoreDump|home> WPA2 ftw =)
Jun 20 22:12:02 <hrw> ftw?
Jun 20 22:12:09 <CoreDump|home> for the win
Jun 20 22:12:13 <hrw> ah
Jun 20 22:12:21 * CoreDump|home apologises for the kiddie speek
Jun 20 22:13:11 <hrw> XorA|gone: can you test something for me?
Jun 20 22:13:34 <XorA|gone> hrw: yeah I am booted now
Jun 20 22:14:50 <hrw> ok
Jun 20 22:15:34 <XorA|gone> and using usb ethernet so wifi is idle
Jun 20 22:18:10 <hrw> XorA|gone: ipkg install http://blog.haerwu.biz/tmp/prism-firmware_1.0-r0_all.ipk
Jun 20 22:18:25 <hrw> XorA|gone: then eject/insert card
Jun 20 22:21:15 <hrw> ops. that one do not load but add to syslog
Jun 20 22:21:28 <XorA|gone> ipkg: invalid magic
Jun 20 22:21:29 <hrw> XorA|gone: vi /lib/udev/prism-fw.sh and :%s/logger//g
Jun 20 22:21:53 <hrw> XorA|gone: shit. probably server fscked it
Jun 20 22:22:06 <CoreDump|home> hehe
Jun 20 22:22:18 <hrw> XorA|gone: ipkg install http://blog.haerwu.biz/tmp/prism-firmware_1.0-r0_all.ipk.bin ;D
Jun 20 22:22:40 <CoreDump|home> hrw: could you please update the examples in /etc/network/interfaces once that script goes live?
Jun 20 22:23:18 <hrw> pre-up one?
Jun 20 22:23:59 <CoreDump|home> your firmware loading thingy
Jun 20 22:24:33 <hrw> CoreDump|home: I am asking about examples in /etc/network/interfaces
Jun 20 22:25:18 <CoreDump|home> hrw: ah, well yes. If your script handles painless firmware auto-loading, users should not use the hard-coded pre-up line ;)
Jun 20 22:26:21 <XorA|gone> hostap_diag $INTERFACE|grep NICID|awk '{print $2}'|sed -e 's/id=0x//' returns nothing for me
Jun 20 22:27:14 <XorA|gone> ah my stupidity
Jun 20 22:29:28 <XorA|gone> hmm I think I found a bug in hostap :-D
Jun 20 22:29:33 <XorA|gone> Ill have to reboot the Z
Jun 20 22:36:41 <hrw> XorA|gone: does it works after reboot?
Jun 20 22:38:38 <XorA|gone> NICID: id=0x801b v1.0.0 (PRISM III PCMCIA (SST parallel flash))
Jun 20 22:38:38 <XorA|gone> PRIID: id=0x0015 v1.1.0
Jun 20 22:38:38 <XorA|gone> STAID: id=0x001f v1.4.2 (station firmware)
Jun 20 22:39:41 <hrw> XorA|gone: one more edit in script - can you? path is missing ;(
Jun 20 22:40:32 <XorA|gone> hrw: yeah
Jun 20 22:41:03 <hrw> XorA|gone: http://pastebin.ca/580004
Jun 20 22:44:43 <XorA|gone> hrw: I dont think the script is running
Jun 20 22:45:16 <hrw> hm. it should be started by udev
Jun 20 22:45:24 <hrw> atleast this is how it works on my laptop
Jun 20 22:45:30 <XorA|gone> its getting a blank CARD_ID
Jun 20 22:45:42 <XorA|gone> echo $CARD_ID >>/tmp/id
Jun 20 22:46:42 <hrw> XorA|gone: :%s/$INTERFACE/wlan0/g please then
Jun 20 22:47:41 <XorA|gone> hrw: same
Jun 20 22:49:45 <XorA|gone> no path for hostap_diag :-)
Jun 20 22:50:08 <hrw> argh
Jun 20 22:50:45 <XorA|gone> 801b is now returned :-)
Jun 20 22:50:49 <XorA|gone> next step on debugging
Jun 20 22:52:01 <XorA|gone> no path for prism2_srec :-D
Jun 20 22:52:16 * CoreDump|home chuckles
Jun 20 22:53:22 <hrw> ~lart angstrom
Jun 20 22:53:31 <XorA|gone> Host AP driver diagnostics information for 'wlan0'
Jun 20 22:53:32 <XorA|gone> NICID: id=0x801b v1.0.0 (PRISM III PCMCIA (SST parallel flash))
Jun 20 22:53:32 <XorA|gone> PRIID: id=0x0015 v1.1.0
Jun 20 22:53:32 <XorA|gone> STAID: id=0x001f v1.8.4 (station firmware)
Jun 20 22:54:19 <hrw> XorA|gone: my script or prism3-firmware one?
Jun 20 22:54:23 <XorA|gone> hrw: so some adding of some /usr/sbin/
Jun 20 22:54:27 <XorA|gone> hrw: yours
Jun 20 22:54:34 <hrw> already added paths
Jun 20 22:57:32 <hrw> I wonder why PRI 1.1.0 instead of 1.1.4
Jun 20 22:57:39 <hrw> but more important is STA
Jun 20 22:58:07 <XorA|gone> does it try and replace PRI?
Jun 20 22:58:47 <CoreDump|home> updating PRI should not be required AFAIK
Jun 20 22:59:48 <hrw> right
Jun 20 23:00:32 <hrw> XorA|gone: your 801d card works without loading PRI?
Jun 20 23:01:01 <XorA|gone> hrw: Im just about to remove prism3 support ipk and try your script
Jun 20 23:01:12 <hrw> ok
Jun 20 23:03:26 <XorA|gone> hrw: bad news, hostap_diag doesnt work without firmware
Jun 20 23:04:10 <hrw> XorA|gone: dmesg show wlan0 anyway?
Jun 20 23:05:06 <XorA|gone> http://rafb.net/p/8CgR8V20.html
Jun 20 23:05:57 <CoreDump|home> "no PRI f/w"
Jun 20 23:06:02 <CoreDump|home> nice one
Jun 20 23:06:14 <XorA|gone> its a prism3 it doesnt have PRI until you load it
Jun 20 23:06:56 <hrw> ok, wlan0 created
Jun 20 23:07:35 <CoreDump|home> XorA|gone: ah, that was new to me
Jun 20 23:08:48 <hrw> XorA|gone:  http://rafb.net/p/nFG5CA70.html
Jun 20 23:10:44 <XorA|gone> hrw: I think its more complex than that, look at /usr/sbin/hostap_fw_load
Jun 20 23:11:52 <hrw> or we can patch hostap_fw_load
Jun 20 23:13:37 <XorA|gone>  /proc/net/hostap/wlan0/ doesnt seem to have NCID which would help
Jun 20 23:14:39 <hrw> XorA|gone: can you "prism2_srec -gs wlan0 pm010102.hex;hostap_diag wlan0"?
Jun 20 23:15:27 <XorA|gone> NICID: id=0x8000 v0.0.1 (EVB2 (HFA3841EVAL1) with PRISM I (3860B) Radio)
Jun 20 23:15:28 <XorA|gone> PRIID: id=0x0015 v1.1.2
Jun 20 23:15:28 <XorA|gone> ioctl[PRISM2_IOCTL_HOSTAPD]: No data available
Jun 20 23:16:00 <hrw> XorA|gone: can you "prism2_srec -gp wlan0 pm010102.hex;hostap_diag wlan0" now?
Jun 20 23:16:35 <XorA|gone> NICID: id=0x801d v1.0.0 (PRISM III PCMCIA (AT24C08 compatible small serial flash))
Jun 20 23:16:35 <XorA|gone> PRIID: id=0x0015 v1.1.2
Jun 20 23:16:35 <XorA|gone> ioctl[PRISM2_IOCTL_HOSTAPD]: No data available
Jun 20 23:16:44 <hrw> ok
Jun 20 23:22:14 <hrw> XorA|gone: http://rafb.net/p/Xotgyh29.html
Jun 20 23:24:45 <hrw> dcordes: you have prism2 card?
Jun 20 23:24:58 <dcordes> hey
Jun 20 23:25:14 <dcordes> just flashed my all new built angstrom to the akita sd and it is finnaly working.
Jun 20 23:25:28 <dcordes> hrw: I can check it now. What do you want me to do?
Jun 20 23:25:33 <dcordes> prism2 here
Jun 20 23:26:12 <dcordes> did you guys change something about su? I can't rum the root shell
Jun 20 23:26:16 <dcordes> in gape
Jun 20 23:26:18 <dcordes> gpe
Jun 20 23:27:27 <hrw> dcordes: hostap_diag wlan0 output (if NICID other then 800c 801d 801b)
Jun 20 23:27:43 <dcordes> I can't. Have no root acces (in gpe)
Jun 20 23:28:15 <hrw> "su -"
Jun 20 23:28:42 <hrw> "ssh root@localhost"
Jun 20 23:28:42 <XorA|gone> Host AP driver diagnostics information for 'wlan0'
Jun 20 23:28:42 <XorA|gone> NICID: id=0x801d v1.0.0 (PRISM III PCMCIA (AT24C08 compatible small serial flash))
Jun 20 23:28:43 <XorA|gone> PRIID: id=0x0015 v1.1.2
Jun 20 23:28:43 <XorA|gone> STAID: id=0x001f v1.8.4 (station firmware)
Jun 20 23:28:55 <CoreDump|home> XorA|gone: yay =)
Jun 20 23:29:55 <XorA|gone> hrw: now needs fixed for prism2.5 cards :-)
Jun 20 23:32:35 <XorA|gone> #if grep -q pri_only=1 $DIR/debug; then
Jun 20 23:32:36 <XorA|gone>     /usr/sbin/prism2_srec -rp wlan0 $STA
Jun 20 23:32:36 <XorA|gone> #fi
Jun 20 23:32:47 <XorA|gone> ie remove the if around the STA upload
Jun 20 23:32:52 <hrw> right
Jun 20 23:33:18 <CoreDump|home> NICID: id=0x800c v1.0.0 (PRISM II (2.5) PCMCIA (SST parallel flash))
Jun 20 23:33:22 <dcordes> PRIID: id=0x0015 v1.0.5 STAID: id=0x001f v1.3.4
Jun 20 23:33:31 <hrw> dcordes: I need NICID line
Jun 20 23:33:46 <XorA|gone> hrw: with that change seems to work on both my cards
Jun 20 23:34:23 <dcordes> NICID: id=0x800c v1.0.0 (PRISM II (2.5) PCMCIA (SST parallel flash)
Jun 20 23:34:41 <dcordes> looks pretty much the same as CoreDump|home ,hrw
Jun 20 23:34:58 <hrw> and as mine cards
Jun 20 23:35:04 <CoreDump|home> =)
Jun 20 23:35:06 <hrw> 800c is most popular iirc
Jun 20 23:35:10 <dcordes> hope i could help
Jun 20 23:35:21 <hrw> dcordes: you can too
Jun 20 23:35:25 <dcordes> anything else to try?
Jun 20 23:35:29 <dcordes> like rawtx or so
Jun 20 23:36:13 <XorA|gone> oh well Connet+ crash is nothing to do with firmware upload :-)
Jun 20 23:37:00 <hrw> dcordes: "ipkg install http://blog.haerwu.biz/tmp/prism-firmware_1.0-r0_all.ipk.bin" then eject/insert card and show 'hostap_diag wlan0'
Jun 20 23:40:41 <XorA|gone> hrw: time to commit and rip out the old prism3-support prism3-firmware packages
Jun 20 23:41:28 <XorA|gone> anyway time for me to sleep
Jun 20 23:41:36 <hrw> XorA|gone: during day I will gather few more testers before put it in poky and oe
Jun 20 23:41:46 <hrw> 01:43 is sleep time here aswell
Jun 20 23:41:47 <XorA|gone> hrw: cool
Jun 20 23:42:03 <CoreDump|home> g'n8 XorA|gone & hrw 
Jun 20 23:42:32 * XorA|gone wonders how he ended up with two collie CF blanking plates and no c7x0 ones, and the collie ones dont fit c7x0
Jun 20 23:42:49 <dcordes> hrw, I have some problems connecting to my ap
Jun 20 23:43:26 <hrw> XorA|gone: I have few cf blanks and not use any
Jun 20 23:43:35 <hrw> dcordes: thats other thing
Jun 20 23:43:50 <dcordes> how can I get rid of the avahi daemon destroying my configs?
Jun 20 23:44:37 <XorA|gone> hrw: tomorrow I shall see if there is just a plastic nub I can file off otherwise I ask you nicely to bring one to guadec
Jun 20 23:45:09 <CoreDump|home> ~lart this avahi crap
Jun 20 23:45:34 <dcordes> CoreDump|home, what is the pack's name?
Jun 20 23:45:40 <CoreDump|home> dcordes: in theory avahi should not touch devices configured in /e/n/interfaces
Jun 20 23:46:06 <dcordes> I don't want avahi on my system anyways
Jun 20 23:46:27 <hrw> XorA|gone: thats what I was planning to do
Jun 20 23:46:39 <hrw> XorA|gone: want leather case for c7x0?
Jun 20 23:46:44 <CoreDump|home> dcordes: try ipkg remove libavahi-client3
Jun 20 23:47:06 <XorA|gone> hrw: I am thinking of selling it, I never use it
Jun 20 23:48:09 <hrw> I have two
Jun 20 23:48:17 <hrw> both not used..
Jun 20 23:49:06 <XorA|gone> anyway really sleep time
Jun 20 23:49:58 <hrw> cu too
Jun 21 00:00:50 <erdinger_> hrw|gone, it won't install your package.bin
Jun 21 00:36:13 <erdinger_> I'm rarely missing irssi in the angstrom feeds
Jun 21 00:40:18 <CoreDump|home> irssi is in oe
**** ENDING LOGGING AT Thu Jun 21 02:59:57 2007