**** BEGIN LOGGING AT Tue Jun 26 02:59:57 2007 Jun 26 04:17:15 will any Angstrom folks be at Ottawa Linux Symposium this week? Jun 26 04:22:47 http://linuxtogo.org/gowiki/LinuxDevices does not list the Zaurus SL 6000 yet there is a http://www.angstrom-distribution.org/unstable/images/tosa/ (Tosa == 6000). Anyone know the status of the Tosa port? Jun 26 07:49:38 hi Jun 26 07:49:44 if i want to rebuild from 0 Jun 26 07:49:50 how i can do... Jun 26 07:49:57 Nuke tmp Jun 26 07:50:08 and i maked an error.. Jun 26 07:50:22 i deleted org.openembedded Jun 26 07:50:25 directory Jun 26 07:50:33 fausto: Check it out again with mtn Jun 26 07:50:46 ok done.. Jun 26 07:50:49 but say Jun 26 07:51:14 ok error in config Jun 26 07:51:18 solving Jun 26 07:52:14 ok all good Jun 26 12:58:29 ok Jun 26 12:58:46 opie works perfetly on hx4700 and wifi too Jun 26 12:58:51 kernel 2.6.21-hh8 Jun 26 12:59:01 woowoo Jun 26 12:59:09 fausto: you definitely deserve some degree of congrats Jun 26 12:59:42 There is now way I would've started w/ an image as my first project, and successfully pulled it off Jun 26 12:59:46 bitbake hates me Jun 26 13:00:17 ^_^ Jun 26 13:00:56 now i would like (after my exams) to spend some time on handhelds to help you and solve problems Jun 26 13:01:06 this is an important project Jun 26 13:01:55 and a big responsibility.. Jun 26 13:02:06 isn't this openembedded? Jun 26 13:02:14 i though hh.org are ... Jun 26 13:02:48 lol, no, fausto you just setup angstrom opie on your hx4700 Jun 26 13:03:41 hh.org is the Familiar rom for pdas, similar in that they're both linux for pdas, but I think the build system is different, and the philosophy about things is different Jun 26 13:03:52 fausto: www.angstrom-distribution.org is us Jun 26 13:04:02 or, it's angstrom Jun 26 13:04:45 dcordes: he might also just mean handhelds in general Jun 26 13:05:24 summatusmentis, I just don't want him to confuse anything with hh.org Jun 26 13:05:27 mmm now i try to get xmms working Jun 26 13:05:39 ipkg update && ipkg install xmms Jun 26 13:06:48 yes Jun 26 13:07:00 but i can't launchi it from shell because Jun 26 13:07:04 ** CRITICAL **: Unable to open display Jun 26 13:07:12 and i haven't icon Jun 26 13:07:14 fausto, you need to start it from X Jun 26 13:07:18 yes Jun 26 13:07:21 maybe you get one after restarting X Jun 26 13:07:26 but no icon in application Jun 26 13:07:27 I always got one for xmms Jun 26 13:07:30 uh ok Jun 26 13:07:34 look inside OTHER Jun 26 13:08:12 i have opie :> Jun 26 13:08:25 umm.. yeah, opie and x11 don't like each other too much Jun 26 13:08:26 ah righ Jun 26 13:08:45 that's why I'm a gpe user Jun 26 13:09:05 polyonymous: ping? Jun 26 13:09:42 summatusmentis, you know the reason of this problem with xmms? Jun 26 13:09:43 fausto: there is something called qt/x11 which allows x11 programs to be run inside opie Jun 26 13:09:52 uh ok Jun 26 13:09:56 x/qt you mean Jun 26 13:10:08 yes, listen to hrw Jun 26 13:10:38 fausto: it's because you have opie. opie is built using Qt, and does not have an X server running at all Jun 26 13:10:47 summatusmentis, pong, 10 minutes I have :) Jun 26 13:11:20 polyonymous: are the opie images 'flash ready' for a collie? Jun 26 13:11:26 usable etc.? Jun 26 13:11:41 summatusmentis, no idea, I have no collie, try checking it with Laibsch Jun 26 13:11:48 alright, thanks :-) Jun 26 13:11:50 packages/xmms-embedded/ for opie Jun 26 13:11:52 I have a feeling, he tried that. Jun 26 13:13:23 no need for 10 minutes, I'm gone :) Jun 26 13:13:47 have fun Jun 26 13:14:33 what do you like about opie? Jun 26 13:14:47 who? me? Jun 26 13:14:55 also fausto Jun 26 13:15:58 yes Jun 26 13:16:07 dcordes: only for collie, the clamshell(3200) has way too much potential w/ X11 Jun 26 13:16:17 but I think opie is the best interface for collie Jun 26 13:16:32 fausto: did you see packages/xmms-embedded/ for opie Jun 26 13:16:39 yes Jun 26 13:16:42 ok Jun 26 13:16:51 but i need qt4 x11 in every case Jun 26 13:17:11 I was only able to gain experience on akita for now so I can't comment on that Jun 26 13:17:12 dcordes, opie is more beautifull ;>and usable ... in my opinion Jun 26 13:17:28 umm... I don't think so, I think qt4-x11 is different Jun 26 13:17:39 the beautiful pokemon in the background? :P Jun 26 13:17:53 hehhe Jun 26 13:18:05 a good interface.. Jun 26 13:18:20 a question: there is xine for handhelds Jun 26 13:18:24 or vlc? Jun 26 13:18:39 opie-player is xine based Jun 26 13:18:46 mmm good ... Jun 26 13:19:13 XorA: qt4-x11 == qt for the GPE env right? Jun 26 13:19:21 not x11 for OPIE env? Jun 26 13:19:34 qt4-x11 is qt for X Jun 26 13:19:35 summatusmentis: for general x11 Jun 26 13:19:36 is htere any way to play videos more fluidly in gpe? Jun 26 13:19:39 gpe has nothing to do with it Jun 26 13:19:46 XorA, there is a wa to increase virtual keyboard dimension Jun 26 13:19:50 well, ok, thanks Jun 26 13:19:56 fausto: opie no clue Jun 26 13:20:02 dcordes: what zaurus? Jun 26 13:20:05 akita Jun 26 13:20:22 mplayer -vo pxa -vm blah.avi Jun 26 13:20:52 dcordes!!!! that's gonna make watching videos much easier... I've been formatting for my iPod Jun 26 13:21:02 * summatusmentis is sort of dense sometimes Jun 26 13:21:21 summatusmentis, huh? Jun 26 13:21:24 ipod Jun 26 13:21:28 what are you talking about? Jun 26 13:21:43 I never even thought about formatting videos to watch on my Z Jun 26 13:22:00 I've been using my iPod(video) for watching videos when travelling Jun 26 13:22:01 format c: ? Jun 26 13:22:05 mencoder -vs scale=320:250,rotate=1 for all clamshells Jun 26 13:22:15 s/vs/vf/ Jun 26 13:22:24 s/250/240/ Jun 26 13:22:56 even collie can join the fun by adding -ofps 15 Jun 26 13:23:02 XorA, i tried to install qt4-x11-free Jun 26 13:23:12 but xmms doesn't work Jun 26 13:23:35 xmms is gtk based, what do you expect? Jun 26 13:23:36 fausto: Im confused why you instrall an x11 program on opie trying to get an x11 program working Jun 26 13:23:38 i should install xmms-embedded? Jun 26 13:23:46 fausto: that would be a better plan Jun 26 13:24:13 ok Jun 26 13:24:46 erm Jun 26 13:24:52 XorA, error openning selected VO Jun 26 13:24:58 device Jun 26 13:25:04 but there isn't a package called xmms.embedded in ipkg Jun 26 13:25:28 xmms-embedded Jun 26 13:25:44 fausto: you have to build it then Jun 26 13:26:03 dcordes: then pxa optimised mplayer isnt in the feeds Jun 26 13:26:27 dcordes: oh I remeber, akita + overlay not in OE kernel for unknown reasons Jun 26 13:26:38 there was some wombling on mailing list about this recently Jun 26 13:27:00 XorA, nothing containing xmms and pxa in akita feeds Jun 26 13:27:11 XorA, uu Jun 26 13:27:31 pitty Jun 26 13:27:45 WTF has xmms got to do with mplayer? Jun 26 13:29:06 argh I got so confused by faustos xmms thing Jun 26 13:29:45 dcordes: search recent email archives for mails from Tim Chick for akita situation Jun 26 13:31:11 fausto: fausto: you have to build it then <-- means 'bitbake xmms-embedded', just as clarification Jun 26 13:31:26 i know Jun 26 13:31:33 :> thanks Jun 26 13:31:36 alright :-) Jun 26 13:32:22 XorA, ah I see, the akita mentor. What's his nick? Jun 26 13:32:39 fausto: what is the image you built? the opie one? Jun 26 13:32:45 yes Jun 26 13:32:56 fausto: what's it called? Jun 26 13:32:56 opie-image Jun 26 13:33:13 with kernel preferred version 2.6.21-hh8 Jun 26 13:33:20 just opie-image? I thought it was... opie-image-16mb or something like that Jun 26 13:33:31 yes is the small version Jun 26 13:33:39 ok, thanks Jun 26 13:35:59 in conclusion i can't install the x11 package in ipkg.. Jun 26 13:36:03 i must rebuild all Jun 26 13:36:11 i need a few thing.. Jun 26 13:36:31 like something to read pdf, to watch video, and to watch image Jun 26 13:36:36 qpdf2 Jun 26 13:36:42 then mozilla minimo Jun 26 13:36:46 opie-player2 Jun 26 13:36:56 konqueror Jun 26 13:36:57 XorA, i must rebuild this package from bitbake Jun 26 13:37:10 fausto: probably Jun 26 13:37:12 can i have mozilla minimo? Jun 26 13:37:18 fausto: no, thats x11 Jun 26 13:38:42 uh ok Jun 26 13:38:56 but there isn't a way to get x11 apllication running in opie? Jun 26 13:39:18 it seems you want x11 but refuse to install it Jun 26 13:39:23 we can't help with that Jun 26 13:41:05 if i can i want to install x11 but i want opie too Jun 26 13:41:20 fausto: because? Jun 26 13:41:57 is better for me Jun 26 13:42:05 fausto: because? Jun 26 13:42:38 is more friendly in my opinion and i'm more satisfied Jun 26 13:42:39 :> Jun 26 13:43:09 fausto: dont sound very satisfied as you demand x11 apps :-D Jun 26 13:45:18 ok i have installed xmms-embedded but where is the binary... i haven't xmms Jun 26 13:45:59 how can i start it^ Jun 26 13:48:20 should be an icon Jun 26 13:48:25 * XorA doesnt use opie though Jun 26 13:49:59 no icon, i don't know... it install correctly Jun 26 13:56:47 fausto: try reloading the icons, under settings, I think Jun 26 13:56:55 ok Jun 26 13:58:00 fausto: also, x11 app under opie, afaik, the only way to do it is with x/qt(or x/qt2) Jun 26 13:58:29 ok Jun 26 13:59:14 qt4-x11-free <---- i have installed it Jun 26 13:59:17 but no changes Jun 26 14:00:05 qt-x11-qvfb - 3.3.7-r1 - Qt/X11 Version 3.3.7 is a full fledged cross-platform application framework is this?? Jun 26 14:07:54 fausto: x/qt is different from qt4-x11 Jun 26 14:08:14 qt4-x11 lets you use opie applications for x11 stuff(GPE, in this case) Jun 26 14:08:26 ah... maybe i must rebuild it from bitbake Jun 26 14:08:27 ? Jun 26 14:08:31 whereas x/qt lets you use x11 applications in qt stuff(OPIE, in this case) Jun 26 14:08:42 you may need to build x/qt from bitbake, yes Jun 26 14:09:43 ok Jun 26 14:10:04 summatusmentis: wrong Jun 26 14:10:15 qt4-x11 lets you use qt4 applications Jun 26 14:10:23 opie is still in 2001 with qt2 Jun 26 14:10:41 ok, I stand corrected, thanks koen Jun 26 14:10:47 No providers of build target x/qt --- what is the name ?? Jun 26 14:11:24 ../org.openembedded.dev/packages/xqt2/xqt2_20060509.bb Jun 26 14:11:44 where i can search for the future Jun 26 14:11:57 the future isn't opie :) Jun 26 14:12:21 fausto: in org.openembedded.dev/packages, that's where all the package .bb files are located Jun 26 14:12:23 its OpenPalmtopIntergratedEnvironmentII Jun 26 14:12:32 koen, i know that the future isn't opie Jun 26 14:12:53 but if someone decide to release NEW opie... Jun 26 14:13:04 fausto: then they will get sued Jun 26 14:13:11 i thing it is a good project.. Jun 26 14:13:14 koen: really? Jun 26 14:13:17 why? Jun 26 14:13:33 because opie is (TM) now by handhelds.org Jun 26 14:13:44 * XorA points to the project name he just posted Jun 26 14:13:59 koen: oh, that's just dumb Jun 26 14:14:14 XorA: that apparently doesn't fall under the (TM)? Jun 26 14:14:14 if necessary i develop opiefausto hahahaha Jun 26 14:14:21 http://www.youtube.com/watch?v=tFLJJw6WRqM Jun 26 14:14:22 koen: no, opie is trying to be (tm) hh.org, if opie guys castrate that attempt then it will all fail Jun 26 14:14:26 fausto: :-) that's the spirit Jun 26 14:14:27 XorA: due to the license george has given benjamin and lorn, OpenPalmtopIntergratedEnvironmentII isn't allowed to be hosted at linuxtogo anymore Jun 26 14:14:28 new asus subnotebook, linux based Jun 26 14:14:37 somebody has an idea what that os might be based on? Jun 26 14:14:53 XorA: the opie guys (bipolar) gave in and gotten a license from george Jun 26 14:14:59 XorA: mega suckiness Jun 26 14:15:00 koen: idiots Jun 26 14:15:31 the best thing to do would be ignore hh.org as without a product for sale they have no right to the (tm) anyway Jun 26 14:15:49 see recent cisco cockup with (tm) iphone Jun 26 14:15:50 * summatusmentis heads out Jun 26 14:15:57 bye summatusmentis Jun 26 14:16:17 XorA: I have a suspicion george has been 'consulting' under the guise of hh.org Jun 26 14:16:41 as far as I understand if I sold an Opie can opener tomorrow in the US because I have sold a product (tm) for them would fail and mine would pass Jun 26 14:17:05 different markets Jun 26 14:17:28 koen: I could sell an Opie PDA, because I have sold, they havent, they fail Jun 26 14:17:37 right Jun 26 14:18:06 cisco tried to fake a cardboard box with an iPhone sticker on it to try and seize (tm) from apple and that failed Jun 26 14:25:09 koen: how are you supposed to use midori, it seems to have no address input method :-) Jun 26 14:31:48 it doesn't? Jun 26 14:31:53 it did have over here Jun 26 14:32:09 but it show 50% of the html as ascii Jun 26 14:34:45 heh heh, I cant see an adress bar here Jun 26 14:54:04 I have read this discussion about opie and that it won't be the future. is there anything different to gpe which may will be the future? I have not enought knowledge about other environments. what about maemo or that openmoko stuff? Jun 26 14:54:56 * XorA thinks openmoko is an evolutionary dead end, but has some good ideas, dont know about maemo Jun 26 14:55:12 gnome-embedded I think is the best bet Jun 26 14:55:29 although kde-embedded would r0x0r Jun 26 14:56:31 ah, I will google about it thx Jun 26 14:56:57 GMAE or something like that is the gnome thingy Jun 26 14:59:10 gnome.org/mobile Jun 26 14:59:18 bye Jun 26 15:00:52 thx Jun 26 15:01:48 good morning Jun 26 15:01:53 GMAE is a platform people can build their environment on Jun 26 15:10:34 if i got the website right openmoko and maemo are gmae based and gpe will switch to it? Jun 26 15:10:52 yes Jun 26 15:11:33 cool Jun 26 15:16:16 Hello. Jun 26 15:17:03 Just a question: Did someone succeed in installing angstrom on sd-card ? Jun 26 15:17:46 Does it need a angstrom-kernel ? I tried aktita and it will not boot. Jun 26 15:18:19 It is crashing during boot..... Jun 26 15:19:25 out of curiosity, what device are you running on? Jun 26 15:20:09 I am running a SL-C1000 with opie on the flash ionstalled. I want to use angstrom booting from sd-card. Jun 26 15:20:39 So I would be able to choose what to boot: opie or angstrom. Jun 26 15:22:10 Of course the running kernel is from opie/gpe, not the real angstrom-kernel. But I think, this should not matter. Jun 26 15:22:32 it matters Jun 26 15:23:40 O.k., but I suppose, after changing the kernel, opie and gpe (from my other sd-card) would not run any more, do they ? Jun 26 15:25:32 vanguard: use better wording. what older distro do you run? Jun 26 15:26:46 vanguard, do as me... install angstrom opie Jun 26 15:26:56 I am now using opie-3.5.2 (installed directly into the device) and gpe (installed on sd-card). Which one I want to boot will be chosen with altboot. Jun 26 15:27:25 opie-3.5.2?? Jun 26 15:27:38 vanguard: you OpenZaurus, not just "gpe" or "opie", take a note of that Jun 26 15:27:39 fausto: oz-3.5.2 with opie. Jun 26 15:27:43 ah ok Jun 26 15:27:47 angstrom aslo comes with gpe, for exampe Jun 26 15:28:03 Is it identical ? Jun 26 15:28:21 psokolovsky_, finally i get opie working good. by the way :> Jun 26 15:28:48 vanguard: on your matter, I saw sth about that on http://planet.linuxtogo.org/, search for "cacko" Jun 26 15:28:58 fausto: good news! Jun 26 15:29:10 fausto: what about wifi problem? Jun 26 15:29:12 My idea was, to install opie into the flash of the device, and gpe into the sd-card. Jun 26 15:29:19 no problems with 2.6.21-hh8 Jun 26 15:29:39 No, cacko is Sharp-rom based. Jun 26 15:30:13 i'm building now xqt2 to run x11 based programs on opie Jun 26 15:30:15 fausto: Aha, thanks much for info! in case you'll pass by the bugtracker, add that info to the ticket you submitted ;-) Jun 26 15:30:30 ok Jun 26 15:31:18 Again: to use angstrom, I have to install a new kernel, the angstrom kernel, is this correct ? Jun 26 15:31:36 sure Jun 26 15:31:58 Hmm, will opie run on this kernel ? Jun 26 15:32:16 opie will, openzaurus probably will not Jun 26 15:32:38 O.k., its just: I need wellenreiter. Jun 26 15:32:50 whats wrong with kismet? Jun 26 15:33:18 I do not like kismet so much. Wellenreiter is better to use. Jun 26 15:33:35 And wellenreiter is showing the strenhth of a signal. Jun 26 15:33:49 This is what I am missing most in kismet. Jun 26 15:33:58 as does kismet, whether those strrenths are real is a whole different debate Jun 26 15:34:06 XorA: I almost have gpsmap working... with no dirty hacks ;-) Jun 26 15:34:16 I'm tempted to run Angstrom on my Ipaq 5450, but I don't see much in the line of reassurance that it will work Jun 26 15:34:31 signal strength in monitor mode is NEVER accurate, period, I don't care what anyone tells you. Jun 26 15:34:41 XorA: If they are relativ would be ok, too. Jun 26 15:34:42 Zero_Chaos: I have gpsdrive working on my Z with google maps.. works well. Jun 26 15:35:45 Another "problem": Using a cell phone as a modem, I did not manage it. Did someone ? Jun 26 15:35:51 yes Jun 26 15:35:55 vanguard: Yep, got that going here. Jun 26 15:36:11 Oh cool ! Jun 26 15:36:29 reyawn: it will, but not perfect Jun 26 15:36:52 I did not manage it. While using bluetooth, it is recognized, but won't dial. Jun 26 15:36:59 The basic setup.. get a serial port (be it via cdc-acm (USB serial) or bluetooth (rfcomm)), then setup pppd to dial *99# for gprs. Jun 26 15:37:06 vanguard: Did you use rfcomm bind? Jun 26 15:37:39 Yes, I did. There was a howto in the internet, but this won't work. Jun 26 15:38:06 In GKdial was no option, to choose the device. Jun 26 15:38:07 Are the devices paired? Jun 26 15:38:10 did you use the right bluetooth service? Jun 26 15:38:17 Yes, they were. Jun 26 15:38:22 my phone has half a dozen serial ports, only one is DUN Jun 26 15:38:35 NAbyss: gpsmap is part of kismet. It maps out wireless access point locations. Althought gpsdrive w/ google maps seems cool. Jun 26 15:38:42 I checked the MAC-Address, too. Jun 26 15:38:46 Zero_Chaos: Ah, cool.. I misunderstood then :) Jun 26 15:39:07 NAbyss: No problem, to most people, yours was cooler anyway ;-) Jun 26 15:39:16 gkdial is busted crap Jun 26 15:39:29 Is there another suggestion ? Jun 26 15:39:36 vanguard: Use manual pppd chat scripts? Jun 26 15:39:43 wvdial :-) Jun 26 15:39:48 use gkdial create scripts then fix them by hand Jun 26 15:39:48 The hard way...... Jun 26 15:39:48 Zero_Chaos: Or that :) Jun 26 15:40:05 wvdial is not available. Jun 26 15:40:22 vanguard: script from desktop works on zaurus Jun 26 15:40:44 psokolovsky_: thanks...maybe I should wait then, I'm running Familiar at the moment and everything seems to work, but I would like to move to a more active distribution and also contribute if possible : ) Jun 26 15:41:09 Yes, scripting will work, but somehow, this way is really user unfriendly, isn't it ? Jun 26 15:41:23 vanguard: patches welcome Jun 26 15:41:41 reyawn: if you expect a stable and working distro you may choose to not run angstrom yet. But yeah, familiar is pretty dead. Jun 26 15:41:48 If I would be a coder, I would do. Jun 26 15:41:58 But I am not. :( Jun 26 15:42:34 anyone use fluxbox on angstrom and have a super keys file? Jun 26 15:42:38 Zero_Chaos: agreed, but there aren't many options at this point. : ) Jun 26 15:43:17 If this woulsd be easy in the future, angstrom will be more popular. It is really a thing, what is missing. Jun 26 15:43:27 reyawn: Angstrom is certainly your best option, as long as you don't need your device for production use, I'm certain your contributions would be great. Jun 26 15:44:05 <6>[ 8518.130000] mmcblk0: mmc0:0001 AF HMB 501760KiB Jun 26 15:44:05 <6>[ 8518.130000] mmcblk0:<4>asic3_mmc: Spurious Data IRQ Jun 26 15:44:18 i have problem with sd card reader Jun 26 15:44:41 Zero_Chaos: I bought the gizmo for the purpose of experimentation with linux (who the hell needs pocket pc 2002!?) and I use linux as my primary os on both laptop/desktop, so I certainly would like to get more involved Jun 26 15:44:49 in angstrom stable and angstrom compiled by me Jun 26 15:44:59 <3>[ 8518.490000] mmcblk0: error 1 sending read/write command Jun 26 15:45:26 reyawn: I use Angstrom on my Zaurus without major issue everyday Jun 26 15:45:50 train time Jun 26 15:45:54 reyawn: great, then I'm glad to have more Ipaq users aboard Jun 26 15:45:58 XorA|gone: have fun Jun 26 15:46:17 XorA: interesting, but I think that Angstrom still has more test time on that platform so it likely works better there I'd imagine Jun 26 15:46:18 reyawn: Angstrom is pretty stable at this point, just missing a lot of stuff (imho) Jun 26 15:46:54 Zero_Chaos: thanks...well, I'm certainly willing to contribute in that regard, so tonight I'll probably give the latest h5000 image a shot (unless you recommend a build from source) Jun 26 15:47:09 does loadkeys still work for changing the keymap Jun 26 15:47:58 reyawn: I do ;-) Jun 26 15:48:01 that's the one nice thing about familiar, pretty much everything works under it...although I still have no luck with my 2gb sd card, which is annoying Jun 26 15:48:19 O.k., I will test a little bit more. Thank you very much for your help ! Now I know a little bit better, what I have to do. And thanks for all the work ! Bye Jun 26 15:49:38 Zero_Chaos: well then I will have to try building from source...going to have to set up openembedded first Jun 26 15:49:43 good luck vanguard Jun 26 15:50:42 reyawn: read the getting started guide, it's pretty good Jun 26 16:24:23 Zero_Chaos: thanks...will do : ) Jun 26 17:00:46 summatusmentis, hei Jun 26 17:00:52 i build xqt2 Jun 26 17:01:09 but it creates an high number of package Jun 26 17:01:13 wat should i do Jun 26 17:01:20 what should i do Jun 26 17:02:17 high number of package? Jun 26 17:02:21 you mean version number? Jun 26 17:02:27 or just a lot of packages? Jun 26 17:07:18 just a lot Jun 26 17:07:22 locale packages Jun 26 17:07:34 how i can install this bing number of package Jun 26 17:07:55 i need only xqt2 and dependencies Jun 26 17:08:21 does it install? Jun 26 17:08:26 xqt2 a package for executing x11 programs on opie Jun 26 17:08:28 you maybe be able to force the install of just what you needs Jun 26 17:08:39 forcing dependencies Jun 26 17:08:46 or after you install it remove them by hand Jun 26 17:08:47 if i put all files .ipk on my cf card Jun 26 17:09:12 I force removed all the locales I didn't need to conserve space Jun 26 17:09:16 and then ipkg install *.ipk it install ALL packages Jun 26 17:09:52 hmm Jun 26 17:10:08 do you know which ones you need? Jun 26 17:12:20 default Jun 26 17:12:20 en Jun 26 17:12:32 but how can i select only locale that i need Jun 26 17:12:41 the 90% of package are locale Jun 26 17:13:09 can i build again with only one locale?? Jun 26 17:13:22 specifing in bitbake some options Jun 26 17:13:22 ? Jun 26 17:25:29 fausto: first of all, you don't need any locales at all ;-) Jun 26 17:25:39 ok Jun 26 17:25:41 secon, just install one you need, voila Jun 26 17:26:01 but what is the package for xqt2 Jun 26 17:26:26 xqt2-version.ipk I guess Jun 26 17:28:54 ok i have xqt Jun 26 17:29:03 how to use now ;> Jun 26 17:34:36 psokolovsky, do you know where i can find information about running xqt on amstrong Jun 26 17:34:39 howtt Jun 26 17:34:42 howto Jun 26 17:35:09 just try it, I guess it should be clear Jun 26 17:35:17 if not, try to ask goxboxlive ;-) Jun 26 17:36:18 is he online?' Jun 26 17:45:06 can you suggest me some interesting package for opie? Jun 26 22:10:11 hi Jun 26 23:35:01 hi Jun 26 23:35:44 i have a little problem with and sd card and kernel 2.6.20-hh6 or 2.6.21-hh8 Jun 26 23:35:58 (all kernel i have tried, with gpe or opie) Jun 26 23:36:32 problem on a hx4700 machine. it give me error I/0 and doesn't create the device of the sd card Jun 26 23:36:45 with familar it works. but not with angstrom Jun 26 23:39:46 another question how can i setup a little script that when opie starts modprobe acx and modprobe hx4700_acx and when i suspend run rmmod of this modules? Jun 26 23:42:04 simply what about runlevels on angstrom **** ENDING LOGGING AT Wed Jun 27 02:59:56 2007