**** BEGIN LOGGING AT Tue Dec 18 02:59:56 2007
Dec 18 04:25:31 <smaction> I have found all sorts of file for download for h39xx but I have found no instructions after searching site and wiki.  I have familiar and opie on now.  How can I change to Angstrom? Where are installation instructions
Dec 18 04:26:40 <barnarda> In the startup.txt file
Dec 18 04:37:46 <smaction> barnarda: if I understand this correctly I must take familiar off my ipaq and put win ce back on? and then place these files where?
Dec 18 04:38:45 <barnarda> I'm sure there's a way to integrate the two, but that's an exercise for the reader as they say
Dec 18 04:39:29 <barnarda> I'm not familiar with iPaqs, sorry
Dec 18 04:40:38 <smaction> is there a way to just have angstrom and now windows?
Dec 18 04:40:44 <smaction> *no windows
Dec 18 05:06:34 <Pixelized> heya =)
Dec 18 05:10:28 <Pixelized> anybody tried e17 ?
Dec 18 05:17:44 <smaction> I have gotten a couple responses in the channel but nothing that really clears things up for me.
Dec 18 05:18:24 <smaction> I have found all sorts of file for download for h39xx but I have found no instructions after searching site and wiki.  I have familiar and opie on now.  How can I change to Angstrom? Where are installation instructions
Dec 18 05:18:52 <smaction> I was referred to the starup.txt file but I don't understand what to do with it
Dec 18 06:01:28 <bluelightning> smaction: you can't really change to angstrom, it's no different than if you were installing Angstrom from scratch
Dec 18 06:01:43 <bluelightning> I don't know how you do that successfully on h3900 though
Dec 18 06:02:04 <bluelightning> well, to clarify, what I mean is changing = reinstalling
Dec 18 06:02:21 <Uhoh> bluelightning?
Dec 18 06:02:32 <bluelightning> Pixelized: yes?
Dec 18 06:02:43 <Pixelized> sorry i must have missed quiet alot of conversation
Dec 18 06:02:48 <Pixelized> tried to install e17
Dec 18 06:03:00 <Pixelized> after noticing many dependencies weren't addressed
Dec 18 06:03:12 <bluelightning> Pixelized: can't really help you there I'm afraid
Dec 18 06:03:26 <Pixelized> no worries not asking for help hehehe
Dec 18 08:08:16 <alaya> well an old updater.sh i had worked ok...
Dec 18 08:32:08 <zlover> Hi Folks, I am trying to build an Angstrom image using angstrom-2008.1 as the DISTRO and trying to build gpe-image ... I am running into the following error : 
Dec 18 08:34:39 <zlover> ~/Desktop/Angstrom/Angstrom_Source_Kernel/tmp/cross/arm-angstrom-linux-gnueabi/bin/as: unrecognized option `-Qy'
Dec 18 08:34:39 <zlover> | make[2]: *** [g++spec.o] Error 1
Dec 18 08:34:39 <zlover> | make[2]: Leaving directory `~/Desktop/Angstrom/Angstrom_Source_Kernel/tmp/work/armv5te-angstrom-linux-gnueabi/gcc-cross-4.2.2-r2/gcc-4.2.2/build.i686-linux.arm-angstrom-linux-gnueabi/gcc'
Dec 18 08:34:39 <zlover> | make[1]: *** [all-gcc] Error 2
Dec 18 08:34:40 <zlover> | make[1]: Leaving directory `~/Desktop/Angstrom/Angstrom_Source_Kernel/tmp/work/armv5te-angstrom-linux-gnueabi/gcc-cross-4.2.2-r2/gcc-4.2.2/build.i686-linux.arm-angstrom-linux-gnueabi'
Dec 18 08:34:43 <zlover> | make: *** [all] Error 2
Dec 18 08:34:45 <zlover> | FATAL: oe_runmake failed
Dec 18 08:34:47 <zlover> NOTE: Task failed: ~I/Desktop/Angstrom/Angstrom_Source_Kernel/tmp/work/armv5te-angstrom-linux-gnueabi/gcc-cross-4.2.2-r2/temp/log.do_compile.31821
Dec 18 08:34:50 <zlover> NOTE: package gcc-cross-4.2.2-r2: task do_compile: failed
Dec 18 08:34:52 <zlover> ERROR: TaskFailed event exception, aborting
Dec 18 08:34:54 <zlover> NOTE: package gcc-cross-4.2.2: failed
Dec 18 08:34:56 <zlover> ERROR: Build of ~/Desktop/Angstrom/Angstrom_Source_Kernel/org.openembedded.dev/packages/gcc/gcc-cross_4.2.2.bb do_compile failed
Dec 18 08:34:59 <zlover> ERROR: Task 188 (~/Desktop/Angstrom/Angstrom_Source_Kernel/org.openembedded.dev/packages/gcc/gcc-cross_4.2.2.bb, do_compile) failed
Dec 18 08:35:02 <zlover> NOTE: Tasks Summary: Attempted 160 tasks of which 135 didn't need to be rerun and 1 failed.
Dec 18 08:35:04 <zlover> I will appreciate if anyone can let me know how to proceed beyond this ... 
Dec 18 08:35:06 <zlover> thx. 
Dec 18 11:14:42 <CoreDump|spitz> note to self: never ever touch uswsusp again
Dec 18 11:16:42 <cofeineSunshine> ;]
Dec 18 11:18:31 <hrw> ;))
Dec 18 11:21:33 <CoreDump|spitz> FS corruption FTL =(
Dec 18 11:22:57 <mhentges> some library got filled w/ random garbage thanks to the journal by the looks of it
Dec 18 11:34:20 <mhentges> !curse splashy
Dec 18 11:34:41 <mhentges> buggy piece of crap fubars debians init
Dec 18 14:49:17 <Pixelized> errg
Dec 18 14:49:24 <Pixelized> usbnet won't recognize my spitz
Dec 18 14:50:11 * dcordes uses prism for networking
Dec 18 14:50:20 <Pixelized> i'm at work
Dec 18 14:50:24 <Pixelized> no wifi 
Dec 18 14:50:34 <dcordes> what's your host machine?
Dec 18 14:50:55 <Pixelized> slackware 11 box running 2.4.33.3
Dec 18 14:51:11 <Pixelized> i blacklisted acm and CDCEther and loaded usbnet
Dec 18 14:51:48 <dcordes> do you have the usbnet entries in /etc/network/interfaces ?
Dec 18 14:51:50 <Pixelized> but dmesg shows nothing good...with acm and CDCEther at least it sa something...bad but it linked itself
Dec 18 14:52:08 <dcordes> I never tried usbnet
Dec 18 14:52:08 <Pixelized> dcordes: no such file
Dec 18 14:52:18 <dcordes> I mean on akita
Dec 18 14:52:28 <Pixelized> spitz here
Dec 18 14:52:53 <Pixelized> dmesg shows clearly
Dec 18 14:53:00 <Pixelized> is not claimed by any active driver
Dec 18 14:53:02 <Pixelized> arg
Dec 18 15:19:11 <dcordes> hey hrw 
Dec 18 15:19:14 <dcordes> how is poky going?
Dec 18 15:19:51 <hrw> good
Dec 18 15:20:44 <dcordes> you need a bootsplash with the new logo ;) looks good
Dec 18 15:20:58 <dcordes> I will try akita image this weekend
Dec 18 15:26:54 <hrw> nice catch with that logo
Dec 18 15:26:57 <dcordes> hrw, can one use more recent images than blinky ones with qemu?
Dec 18 15:27:16 <hrw> sure
Dec 18 15:27:23 <hrw> grab any autobuilder one
Dec 18 15:29:41 <dcordes> hrw, can I also use the akita kernel image in qemu?
Dec 18 15:29:48 <dcordes> or only qemuarm one?
Dec 18 15:30:10 <ffc> dcordes: I've seen that last version of qemu supports akita machine
Dec 18 15:30:14 <hrw> with recent qemu probably akita images will work
Dec 18 15:30:20 <hrw> I did not tested it
Dec 18 15:30:30 <hrw> I use qemuarm/qemux86 with qemu
Dec 18 15:32:30 <dcordes> Error, unsupported machine type akita
Dec 18 15:32:53 <dcordes> QEMU PC emulator version 0.9.0, Copyright (c) 2003-2007 Fabrice Bellard
Dec 18 15:36:00 <dcordes> hrw, dude file manager lacks pixmap
Dec 18 15:37:58 <dcordes> hrw, "Terminal\ When all else fails." haha
Dec 18 15:42:05 <hrw> dcordes: you need qemu from october iirc
Dec 18 15:42:11 <hrw> that file manager is known
Dec 18 15:42:37 <dcordes> ~lart ubuntu for obsolete qemu
Dec 18 15:54:00 <dcordes> is there a list of supported qemu arm machine types?
Dec 18 15:54:22 <hrw> qemu -M ?
Dec 18 15:54:33 <hrw> thats the command
Dec 18 15:54:41 <dcordes> not here
Dec 18 15:54:53 <hrw> qemu-system-arm -M ?
Dec 18 15:54:55 <dcordes> ah requires argument..
Dec 18 15:54:56 <hrw> then
Dec 18 15:55:24 <dcordes> pc         Standard PC (default)
Dec 18 15:55:24 <dcordes> isapc      ISA-only PC
Dec 18 15:55:25 <dcordes> great
Dec 18 15:56:35 <dcordes> hrw, is there a way to get networking done in poky-qemu?
Dec 18 15:56:45 <hrw> http://pastebin.ca/822171
Dec 18 15:57:12 <hrw> dcordes: poky-qemu script do net
Dec 18 15:58:06 <dcordes> hrw, on eth0?
Dec 18 15:58:36 <hrw> yes
Dec 18 15:58:47 <hrw> you need tun/tap support on host anyway
Dec 18 15:58:57 <hrw> rest is just qemu doc reading
Dec 18 15:59:29 <dcordes> hrw, tun module is loaded on host
Dec 18 16:09:15 <Pixelized> hum
Dec 18 16:09:21 <Pixelized> bitbake is failing to compile qemu
Dec 18 16:11:42 <hrw> common problem under Bzdryng 8.3
Dec 18 16:11:57 <Pixelized> bzdryng 8.3?
Dec 18 16:12:55 <hrw> you did not run bzdryng 8.3?
Dec 18 16:13:35 <Pixelized> no clue what that is
Dec 18 16:13:58 <Pixelized> i follow angstrom build environment instruction
Dec 18 16:14:09 <hrw> just like we have no clue about how qemu failed for you
Dec 18 16:14:38 <Pixelized> lol
Dec 18 16:17:17 <hrw> simple isn't it?
Dec 18 16:18:44 <polyonymous_> I'm sure the problem is fixed in bzdryng 8.4
Dec 18 16:19:03 <hrw> polyonymous_: 8.4 is beta still
Dec 18 16:19:14 <Pixelized> ok
Dec 18 16:19:21 <Pixelized> wth is bzdryng?
Dec 18 16:19:23 <polyonymous_> well, there was a leaked release candidate.
Dec 18 16:19:36 <polyonymous_> Pixelized, the thing that causes bitbake fail on qemu?
Dec 18 16:20:56 <Pixelized> looking at logs
Dec 18 16:21:00 <Pixelized> errors with syscall.c
Dec 18 16:22:16 <polyonymous_> I think it narrows the search down to Bzdryng 8.3 build 7. Do you know how to pastebin your logs?
Dec 18 16:23:37 <Pixelized> yes
Dec 18 16:23:44 <Pixelized> i copy and paste them in channel =P hahaha
Dec 18 16:23:45 <Pixelized> http://pastebin.com/m198dbf4e
Dec 18 16:25:15 <polyonymous_> better. But I have no idea ;-) Perhaps hrw has :)
Dec 18 16:25:25 <hrw> what distro?
Dec 18 16:26:00 <hrw> and how old linux-libc-headers it has?
Dec 18 16:26:04 <Pixelized> slackware 11 dual xeon
Dec 18 16:27:10 <Pixelized> hum haven't done updates on it
Dec 18 16:27:55 <polyonymous_> haven't looked at slackware for ages... how old is 11?
Dec 18 16:28:48 <Pixelized> 12 is the new version
Dec 18 16:28:59 <hrw> http://thedailywtf.com/Articles/ITAPPMONROBOT.aspx
Dec 18 16:29:00 <Pixelized> 11 was released like in 2006-10-02 lol
Dec 18 16:29:32 <polyonymous_> perhaps you have outdated kernel headers then.
Dec 18 16:29:36 <hrw> Pixelized: I would try  updating linux-libc-headers
Dec 18 16:30:14 <Pixelized> hrw: that would make sens
Dec 18 16:30:20 <Pixelized> looking into a full update right now tho
Dec 18 16:30:33 <Pixelized> polyonymous_: shouldn't be related to kernel headers?!?!!?
Dec 18 16:31:14 <polyonymous_> Pixelized, huh? yes.
Dec 18 16:31:30 <Pixelized> my system kernel headers shouldn't be an issue ??
Dec 18 16:31:39 <Pixelized> bitbake should take the ones in the environment
Dec 18 16:31:50 <Pixelized> as for qemu then that could be a libc issue
Dec 18 16:32:00 <hrw> Pixelized: qemu is host...
Dec 18 16:32:06 <hrw> not target binary
Dec 18 16:32:09 <polyonymous_> qemu-native is a native package
Dec 18 16:32:22 <Pixelized> yes
Dec 18 16:32:28 <Pixelized> but qemu should run on 2.4.x kernel
Dec 18 16:32:35 <Pixelized> even tho i'm compiling stuff for a 2.6.x kernel
Dec 18 16:32:51 <Pixelized> that's what i'm trying to say the kernel headers shouldn't stop qemu from compiling??
Dec 18 16:34:49 <hrw> maybe
Dec 18 16:34:52 <hrw> but they do
Dec 18 16:35:30 <Pixelized> hum
Dec 18 16:35:46 <Pixelized> qemu is looking for specific hardware stuff in the kernel headers?
Dec 18 16:35:58 <Pixelized> taht are not compatible with 2.4.x?
Dec 18 16:36:02 <polyonymous_> qemu is looking for specific headers.
Dec 18 16:36:23 <polyonymous_> BTW, why do you think qemu should run on 2.4?
Dec 18 16:36:33 <Pixelized> why shouldn't it
Dec 18 16:36:37 <Pixelized> vmware runs on 2.4.x
Dec 18 16:36:58 <polyonymous_> that is not an answer :)
Dec 18 16:37:01 <Pixelized> it's more i don't see why it shouldn't then it should
Dec 18 16:37:15 <Pixelized> i run all the things i need on 2.4.x
Dec 18 16:37:19 <Pixelized> never had issues
Dec 18 16:37:23 <polyonymous_> actually, I'd say, why do you think qemu should BUILD on 2.4, not run.
Dec 18 16:37:38 <Pixelized> polyonymous_: because i don't see why it shouldn't lol =P
Dec 18 16:37:41 <hrw> qemu will build on host running 2.4 kernel
Dec 18 16:37:51 <hrw> it just require 2.6 kernel headers
Dec 18 16:38:12 <polyonymous_> Right, I meant headers, not running kernel, of course
Dec 18 16:38:38 <Pixelized> hrw:  it require 2.6 kernel headers?
Dec 18 16:38:56 <polyonymous_> Pixelized, 2.6 runs everything I need, but I don't see how it means MS Word runs on linux 2.6 :)
Dec 18 16:39:29 <hrw> Pixelized: it looks like
Dec 18 16:39:33 <Pixelized> polyonymous_: then your not running wine =P
Dec 18 16:39:35 <Pixelized> mouhahah
Dec 18 16:39:48 <hrw> I have one device with 2.4 kernel
Dec 18 16:39:58 <hrw> but wrt54gs just do not have working 2.6
Dec 18 16:40:02 <Pixelized> polyonymous_: that has nothing to do with kernel =P see i can give you smerk answers 2 =P
Dec 18 17:52:30 <Dromede> hello people
Dec 18 17:53:44 <Pixelized> Dromede: hello
Dec 18 17:55:40 <Dromede> i need some help with angstrom rc1
Dec 18 17:55:49 <Dromede> i have it on my C1000
Dec 18 17:56:03 <Dromede> and i want to add the unstable feed so i can instal E17
Dec 18 17:56:12 <Dromede> but i'm not sure how to add the unstable
Dec 18 17:56:18 <Dromede> feed
Dec 18 17:56:36 <Dromede> am i supposed to update my /etc/ipkg/base-feed-conf file?
Dec 18 18:17:35 <Pixelized> anybody in here tried e17 packages?
Dec 18 18:22:53 <Dromede> i'd like to
Dec 18 18:23:12 <Dromede> but i don't know how to include the unstable feed in angstrom rc1
Dec 18 18:24:52 <smaction> I am new to Linux and Angstrom I have h39xx and have Familiar and Opie on it. I want to change.
Dec 18 18:24:55 <smaction> I was referred to the starup.txt file but I don't understand what to do with it
Dec 18 18:25:04 <smaction> I have found all sorts of file for download for h39xx but I have found no instructions after searching site and wiki.  I have familiar and opie on now.  How can I change to Angstrom? Where are installation instructions
Dec 18 18:25:27 <Pixelized> Dromede: well i tried but failed
Dec 18 18:25:50 <Pixelized> seems borked was missing tons of stuff had to xfbdev | x-terminal-emulator to see what it was missing why it would seg fault
Dec 18 18:27:10 <Dromede> hmm
Dec 18 18:27:18 <Dromede> how did you get the packages?
Dec 18 18:37:22 <Pixelized> Dromede: from unstable
Dec 18 18:37:37 <Pixelized> thus why i said they are "probably" borked
Dec 18 18:37:41 <Dromede> how did you add the unstable feed?
Dec 18 18:38:27 <Pixelized> you either download them manualy
Dec 18 18:38:31 <Pixelized> or add in /etc/ipkg/
Dec 18 18:38:38 <Pixelized> your feed  you wnat it to get packages.gz
Dec 18 18:38:45 <Dromede> i tried that
Dec 18 18:38:51 <Dromede> and it wont work
Dec 18 18:39:47 <Dromede> i tried adding "http://www.angstrom-distribution.org/unstable/feed/armv5te/base/" to /etc/base-feed.conf
Dec 18 18:41:45 <Dromede> and then i get "WARNING: ignoring unknown configuration parameter: http://www.angstrom-distribution.org/unstable/feed/armv5te/base/ "
Dec 18 18:43:38 <Pixelized> 2 sec phone
Dec 18 18:44:32 <Pixelized> src/gz uinstablebase http://www.angstrom-distribution.org/unstable/feed/armv5te/base
Dec 18 18:44:47 <Dromede> yes i did that
Dec 18 18:45:02 <Dromede> and  i get the error mentioned above
Dec 18 18:45:28 <Pixelized> i added that in unstable-base.conf
Dec 18 18:45:37 <Dromede> i also tried adding that feed in ipkg.conf "src unstable http://www.angstrom-distribution.org/unstable/feed/armv5te/base"
Dec 18 18:45:47 <Dromede> and i get i to download the Packages file
Dec 18 18:45:48 <Pixelized> then did ipkg update
Dec 18 18:45:57 <Dromede> and ipkg can see the packages
Dec 18 18:46:11 <Dromede> but it cant install any of them
Dec 18 18:46:28 <Pixelized> i download them manualy
Dec 18 18:46:52 <Dromede> i really don't feel like doing that, there's alot of dependencies for e-wm
Dec 18 18:46:59 <Pixelized> and some unmentioned
Dec 18 18:47:04 <Dromede> heh
Dec 18 18:47:29 <Dromede> what machine are you using?
Dec 18 18:47:50 <Pixelized> zaurus spitz
Dec 18 18:47:54 <Pixelized> slc-3200
Dec 18 18:48:09 <Pixelized> yeah seems my method is borked for ipkg as well
Dec 18 18:48:21 <Pixelized> just tried it now the package i was downloading didn't come from unstable
Dec 18 18:48:22 <Pixelized> my bad
Dec 18 18:48:45 <Dromede> then, where did it come from?
Dec 18 18:48:59 <Pixelized> from the actual base feed
Dec 18 18:49:00 <Pixelized> 2007
Dec 18 18:49:06 <Pixelized> just tried something that was only in unstable
Dec 18 18:49:07 <Pixelized> xfwm4
Dec 18 18:49:07 <Dromede> there's no e-wm packages in the stable feed AFAICT
Dec 18 18:49:17 <Pixelized> Dromede: there is none that i did yesterday by hand
Dec 18 18:49:31 <Pixelized> downloaded all the mentioned dependencies + other stuff enlightenment was complaining was missing
Dec 18 18:50:07 <Dromede> maybe we should report this as a bug
Dec 18 18:50:09 <Pixelized> running strace on why ipkg borks out
Dec 18 18:50:14 <Dromede> the unstable feed adding thing
Dec 18 18:52:04 <Pixelized> hum
Dec 18 18:52:07 <Pixelized> xsystem fork failed
Dec 18 18:52:35 <Dromede> umm...ok
Dec 18 18:52:41 <Dromede> whatever that is XD
Dec 18 18:54:10 <Pixelized> lol
Dec 18 18:54:25 <Pixelized> nice
Dec 18 18:54:28 <Pixelized> pastebin is crapping out on me
Dec 18 18:55:05 <Pixelized> http://pastebin.ca/822430
Dec 18 18:55:40 <Pixelized> hum
Dec 18 18:55:41 <Pixelized> sweet
Dec 18 18:56:13 <Dromede> i get a completey different error
Dec 18 18:56:18 <Dromede> sec...
Dec 18 18:57:32 <Dromede> i moved all the .conf files from /etc/ipkg
Dec 18 18:57:54 <Dromede> then i added "src unstable http://www.angstrom-distribution.org/unstable/feed/armv5te/base" ti ipkg.conf
Dec 18 18:57:55 <Pixelized> Dromede: no worries
Dec 18 18:58:01 <Pixelized> since i ipkg install xfwm4
Dec 18 18:58:02 <Dromede> then ipkg update
Dec 18 18:58:04 <Pixelized> everything borked
Dec 18 18:58:10 <Pixelized> now ipkg update don't work no more fork errors 2
Dec 18 18:58:12 <Pixelized> lol
Dec 18 18:58:18 <Dromede> heh 
Dec 18 18:58:44 <Dromede> mine works
Dec 18 18:58:50 <CoreDump> Pixelized: "ERROR: fork failed before execution:" -> add some swap
Dec 18 18:58:51 <Pixelized> temporarly borked
Dec 18 18:59:00 <Pixelized> CoreDump:  yeah just noticed i didn't turn it on
Dec 18 18:59:08 <Pixelized> thus the temp borked comment 2 seconds ago
Dec 18 18:59:18 <Pixelized> i had rebooted and didn't put my swap file in /etc/fstab
Dec 18 18:59:24 <CoreDump> the angstrom feeds pretty much OOM my spitz here OOTB
Dec 18 19:00:20 <Pixelized> CoreDump:  i tried manualy installing e-17 yesterday so i reinstalled since
Dec 18 19:00:36 <Pixelized> had to xfbdev | x-terminal-emulator to see what was causing enlightenment_start to fail
Dec 18 19:00:52 <Pixelized> seg faulting for missing packages not in dependencies
Dec 18 19:01:14 <Pixelized> installed those packages then seg faulted without any info....and straceing it was out of the question so i reinstalled fresh
Dec 18 19:02:25 <Dromede> when i do "ipkg install e-wm" i get "Clearing state_want and state_flag for pkg=(every package in the list) (arch_priority=0 flag=0 want=2)
Dec 18 19:02:38 <Dromede> that's from the unstable feed
Dec 18 19:03:24 <Pixelized> dd if=/dev/zero of=/swapfile bs=1024 count=262144
Dec 18 19:03:29 <Pixelized> erg sorry wrong window
Dec 18 19:03:38 <Dromede> it's ok 
Dec 18 19:03:52 <Dromede> you reminded me that i should do my swap file :D
Dec 18 19:04:12 <Pixelized> keep on thinking i didn't reinstall last nite
Dec 18 19:04:35 <Pixelized> gonna have to make myself an hdimage of all my stuff at 100% then save it for testing
Dec 18 19:05:10 <CoreDump> Pixelized: I use multiple 1Gb partitions for the rootfs and switch between them via altboot
Dec 18 19:05:34 <Pixelized> CoreDump: hum interesting
Dec 18 19:05:51 <Pixelized> CoreDump: so are you a part of development team
Dec 18 19:05:55 <Pixelized> i see alot of your posts online
Dec 18 19:06:14 <CoreDump> I have been pretty active in the OZ days, yes
Dec 18 19:06:20 <CoreDump> Angstrom not so much
Dec 18 19:06:41 <Pixelized> any particular reason?
Dec 18 19:07:13 <CoreDump> Yes, actually =) But this ain't the place to go into details
Dec 18 19:07:17 <Pixelized> ahh there we go
Dec 18 19:07:20 <Pixelized> xfwm4 installing
Dec 18 19:07:38 <Pixelized> eek
Dec 18 19:07:42 <Dromede> heh
Dec 18 19:07:46 <Dromede> what now?
Dec 18 19:07:53 <Pixelized> ipkg: (null): Bad address 
Dec 18 19:07:53 <Pixelized> ipkg: (null): Bad address 
Dec 18 19:07:56 <Pixelized> heuhe
Dec 18 19:08:02 <Pixelized> right before the configuring
Dec 18 19:08:36 <Dromede> hmm
Dec 18 19:08:50 <Dromede> i guess there's some major problems with ipkg here
Dec 18 19:09:06 <Dromede> i'm gonna try rc1.1
Dec 18 19:09:07 <Pixelized> could be the unstable packages.gz
Dec 18 19:09:15 <Pixelized> pointing to bad filenames
Dec 18 19:09:41 <Pixelized> why not rc1.2
Dec 18 19:09:59 <Pixelized> hum just noticed
Dec 18 19:10:11 <Pixelized> only altboot console
Dec 18 19:11:03 <Dromede> the rc1.2  x11 image should come around in a few hours
Dec 18 19:12:35 <Dromede> what's the status on the zaurus 2.6 kernel?
Dec 18 19:12:57 <Dromede> i'm particularly interested in the overlay and cpufreq scaling?
Dec 18 19:14:09 <Pixelized> CoreDump: can i pm     you?
Dec 18 19:14:24 <CoreDump> yes
Dec 18 19:20:56 <Pixelized> CoreDump: system still works trying to see if the xfwm4 would start
Dec 18 19:22:16 <Pixelized> hosing it was yesterday and maybe again tonight hahaha
Dec 18 19:46:28 <zlover> HI everyone ... I am trying to build gpe-image using the OE/Angstrom distribution and ran into the following errors : 
Dec 18 19:46:47 <zlover> |       -I. -I. -I/home/nishi/Desktop/Angstrom/Angstrom_Source_Kernel/tmp/work/armv5te-angstrom-linux-gnueabi/gcc-cross-4.2.2-r2/gcc-4.2.2/gcc -I/home/nishi/Desktop/Angstrom/Angstrom_Source_Kernel/tmp/work/armv5te-angstrom-linux-gnueabi/gcc-cross-4.2.2-r2/gcc-4.2.2/gcc/. -I/home/nishi/Desktop/Angstrom/Angstrom_Source_Kernel/tmp/work/armv5te-angstrom-linux-gnueabi/gcc-cross-4.2.2-r2/gcc-4.2.2/gcc/../include -I/home/nishi/Desktop/Angstrom/An
Dec 18 19:46:47 <zlover> | /home/nishi/Desktop/Angstrom/Angstrom_Source_Kernel/tmp/cross/arm-angstrom-linux-gnueabi/bin/as: unrecognized option `-Qy'
Dec 18 19:46:47 <zlover> | make[2]: *** [g++spec.o] Error 1
Dec 18 21:40:53 <mimecar> hi
Dec 18 21:41:22 <dcordes> hey
Dec 18 21:41:33 <mimecar> hi dcordes
Dec 18 21:41:53 <Pixelized> got my qemu to work in 2.4.x
Dec 18 21:42:00 <Pixelized> yesss
Dec 18 21:42:17 <dcordes> what are you doing in 2.4.x land?
Dec 18 21:42:19 <mimecar> xD
Dec 18 21:42:27 <Pixelized> dcordes: lazyness?
Dec 18 21:42:31 <Pixelized> slackware 11
Dec 18 21:42:38 <Pixelized> installed last year don't feel like upgrading
Dec 18 21:43:29 <mimecar> upgrade is bad ;)
Dec 18 21:43:35 <Pixelized> exactly
Dec 18 21:43:41 <Pixelized> and don't feel like reinstalling either =P
Dec 18 21:44:16 <Sketch> Pixelized: hey, i'm still on 10.2 ;)
Dec 18 21:44:24 <Pixelized> probably gonna install slackware 12 on my laptop tonight
Dec 18 21:44:26 <Pixelized> Sketch:  nice
Dec 18 21:45:03 <Pixelized> 2.6.x land was for 2 long full of nasty orcs for my taste =P
Dec 18 21:45:12 <Pixelized> mind you now it's full of magical fairies
Dec 18 21:54:00 <Pixelized> going home work day over
Dec 18 21:54:03 <Pixelized> cia peeps
Dec 18 23:30:32 <zlove1> Hi All ... I am trying to build an OE/Angstrom based image "gpe-image". Using the DISTRO="angstrom-2008.1". 
Dec 18 23:32:27 <zlove1> I am getting errors in the gcc-cross ... error of the type : -Qy option is not recognized. I will appreciate if someone can take a look at the error log and assist me ... (log follows)
Dec 18 23:37:36 <zlove1> NOTE: Running task 171 of 3684 (ID: 188, ~/Desktop/Angstrom/Angstrom_Source_Kernel/org.openembedded.dev/packages/gcc/gcc-cross_4.2.2.bb, do_compile)
Dec 18 23:37:36 <zlove1> NOTE: package gcc-cross-4.2.2: started
Dec 18 23:37:36 <zlove1> NOTE: package gcc-cross-4.2.2-r2: task do_compile: started
Dec 18 23:37:36 <zlove1> ERROR: function do_compile failed
Dec 18 23:37:36 <zlove1> |       -I. -I. -I~/Desktop/Angstrom/Angstrom_Source_Kernel/tmp/work/armv5te-angstrom-linux-gnueabi/gcc-cross-4.2.2-r2/gcc-4.2.2/gcc -I~/Desktop/Angstrom/Angstrom_Source_Kernel/tmp/work/armv5te-angstrom-linux-gnueabi/gcc-cross-4.2.2-r2/gcc-4.2.2/gcc/. -I~/Desktop/Angstrom/Angstrom_Source_Kernel/tmp/work/armv5te-angstrom-linux-gnueabi/gcc-cross-4.2.2-r2/gcc-4.2.2/gcc/../include -I~/Desktop/Angstrom/Angstrom_Source_Kernel/tmp/work/armv5te-an
Dec 18 23:38:21 <zlove1> I will appreciate if anyone can look at this and let me know what could be wrong ? 
Dec 18 23:38:54 <zlove1> (04:00:21) zlove1: NOTE: Running task 171 of 3684 (ID: 188, ~/Desktop/Angstrom/Angstrom_Source_Kernel/org.openembedded.dev/packages/gcc/gcc-cross_4.2.2.bb, do_compile)
Dec 18 23:38:54 <zlove1> (04:00:21) zlove1: NOTE: package gcc-cross-4.2.2: started
Dec 18 23:38:54 <zlove1> (04:00:21) zlove1: NOTE: package gcc-cross-4.2.2-r2: task do_compile: started
Dec 18 23:38:54 <zlove1> (04:00:21) zlove1: ERROR: function do_compile failed
Dec 18 23:38:55 <zlove1> (04:00:21) zlove1: |       -I. -I. -I~/Desktop/Angstrom/Angstrom_Source_Kernel/tmp/work/armv5te-angstrom-linux-gnueabi/gcc-cross-4.2.2-r2/gcc-4.2.2/gcc -I~/Desktop/Angstrom/Angstrom_Source_Kernel/tmp/work/armv5te-angstrom-linux-gnueabi/gcc-cross-4.2.2-r2/gcc-4.2.2/gcc/. -I~/Desktop/Angstrom/Angstrom_Source_Kernel/tmp/work/armv5te-angstrom-linux-gnueabi/gcc-cross-4.2.2-r2/gcc-4.2.2/gcc/../include -I~/Desktop/Angstrom/Angstrom_Source_Kernel/
Dec 18 23:39:00 <zlove1> (04:00:21) zlove1: | ~/Desktop/Angstrom/Angstrom_Source_Kernel/tmp/cross/arm-angstrom-linux-gnueabi/bin/as: unrecognized option `-Qy'
Dec 18 23:39:03 <zlove1> (04:00:21) zlove1: | make[2]: *** [g++spec.o] Error 1
Dec 18 23:41:02 <zlove1> hi, is anyone online here ? 
Dec 18 23:46:21 <zlove1> hi alaya
Dec 18 23:46:45 <alaya> hi, successfully latest spitz autobuild onto c3200.  very impressive release.  i am curious about swap - thinking about putting a swap on SD card.  any recommendations for size?
Dec 18 23:46:51 <alaya> hi zlove1
Dec 18 23:47:29 <zlove1> wondering if you can help me with some OE/Angstrom build errors I am seeing ... Objective : Trying to build an Angstrom/OE gpe-image for my SL-C750
Dec 18 23:47:39 <zlove1> the error I am seeing is as follows : 
Dec 18 23:47:59 <zlove1> (04:01:39) zlove1: (04:00:21) zlove1: NOTE: Running task 171 of 3684 (ID: 188, ~/Desktop/Angstrom/Angstrom_Source_Kernel/org.openembedded.dev/packages/gcc/gcc-cross_4.2.2.bb, do_compile)
Dec 18 23:47:59 <zlove1> (04:01:39) zlove1: (04:00:21) zlove1: NOTE: package gcc-cross-4.2.2: started
Dec 18 23:47:59 <zlove1> (04:01:39) zlove1: (04:00:21) zlove1: NOTE: package gcc-cross-4.2.2-r2: task do_compile: started
Dec 18 23:47:59 <zlove1> (04:01:39) zlove1: (04:00:21) zlove1: ERROR: function do_compile failed
Dec 18 23:47:59 <zlove1> (04:01:39) zlove1: (04:00:21) zlove1: |       -I. -I. -I~/Desktop/Angstrom/Angstrom_Source_Kernel/tmp/work/armv5te-angstrom-linux-gnueabi/gcc-cross-4.2.2-r2/gcc-4.2.2/gcc -I~/Desktop/Angstrom/Angstrom_Source_Kernel/tmp/work/armv5te-angstrom-linux-gnueabi/gcc-cross-4.2.2-r2/gcc-4.2.2/gcc/. -I~/Desktop/Angstrom/Angstrom_Source_Kernel/tmp/work/armv5te-angstrom-linux-gnueabi/gcc-cross-4.2.2-r2/gcc-4.2.2/gcc/../include -I~/Desktop/Angstrom/Angs
Dec 18 23:48:04 <zlove1> (04:01:39) zlove1: (04:00:21) zlove1: | ~/Desktop/Angstrom/Angstrom_Source_Kernel/tmp/cross/arm-angstrom-linux-gnueabi/bin/as: unrecognized option `-Qy'
Dec 18 23:48:08 <zlove1> (04:01:39) zlove1: (04:00:21) zlove1: | make[2]: *** [g++spec.o] Error 1
Dec 18 23:48:23 <alaya> you should probably use a pastebin for that.  like pastebin.ca   so its more legible to readers
Dec 18 23:48:50 <zlove1> will appreciate if you can tell me some remedies to get rid of this error ... FYI, I am new to OE and bitbake ... so just got my environment in place ... where can I get pastebin ? 
Dec 18 23:48:54 <zlove1> sure, thx for the tip. 
Dec 18 23:49:04 <alaya> http://pastebin.ca
Dec 18 23:50:46 <zlove1> hmm .. then how do I tie that in with this irc # ? 
Dec 18 23:50:50 <zlove1> a URL ? 
Dec 18 23:51:07 <alaya> yes, paste your output there, not here.  it floods the channel
Dec 18 23:51:18 <zlove1> understood, thx .
Dec 18 23:54:06 <zlove1> ok, here it is :) ... this is kewl ... http://pastebin.ca/822813
Dec 19 00:57:45 <zlove1> Hi Geo, Good day. 
Dec 19 00:58:15 <zlove1> Are you an Angstrom expert ? :). I ask because I am having some issues when trying to do an Angstrom/OE build and needed some assistance. 
Dec 19 01:13:03 <DaedalusX> hi all
Dec 19 01:14:33 <DaedalusX> is there any way to get Xfbdev to switch between resolutions? currently I start it up in 240x320 whenever i wanna play doom or quake and then close it and start it up again in 480x640, but is there any way to do it on the fly?
**** ENDING LOGGING AT Wed Dec 19 02:59:57 2007