**** BEGIN LOGGING AT Wed Jan 21 04:28:46 2009
Jan 21 13:13:08 <thorsten1> hi
Jan 21 13:55:08 <thorsten1> I am using a AT91SAM9260-EK , which mdtblock should i use in uboot? My kernel didn't find the JFFS2 Filesystem? hope someone can help me
Jan 21 14:30:31 <mckoan> thorsten1: hi
Jan 21 14:31:18 <mckoan> thorsten1: could you describe what you did ?
Jan 21 14:39:36 <thorsten1> i build the angstrom distribution with openembedded
Jan 21 14:39:42 <thorsten1> the console image
Jan 21 14:40:04 <mckoan> thorsten1: how did you stored binaried on the target?
Jan 21 14:40:47 <mckoan> s/binaried/binaries
Jan 21 14:41:15 <thorsten1> i stored all in the nandflash of at91sam9260 or what you mean? 
Jan 21 14:42:37 <thorsten1> the bootstrap, uboot files from linux4sam and the kernel and jffs2 filesystem from angstrom
Jan 21 14:47:11 <thorsten1> but i see also in the angstrom files that there is added no kernel-module for jffs2 filesystems... also it is not selected in ther kernel conf for at91sam9260-ek... could it be that jffs2 driver is not installed? :-( 
Jan 21 14:50:36 <mckoan> thorsten1: of course you do need this : CONFIG_JFFS2_FS=y
Jan 21 14:51:26 <thorsten1> i will compile the hole angstrom with these CONFIG_JFFS2_FS=y tonight
Jan 21 14:51:56 <mckoan> CONFIG_JFFS2_FS=y
Jan 21 14:51:56 <mckoan> CONFIG_JFFS2_FS_DEBUG=0
Jan 21 14:51:56 <mckoan> CONFIG_JFFS2_FS_WRITEBUFFER=y
Jan 21 14:53:26 <thorsten1> thanks! hope that the kernel than find the filesystem. :-) 
Jan 21 14:54:35 <mckoan> good luck ;-)
Jan 21 14:59:40 <thorsten1> Finally i want to connect a bluetooth - usb module to my board and write an Bluetooth to Ethernet gateway :-)
Jan 21 15:00:43 <thorsten1> and because of the bluez included bluetooth stack it would be perfect to run angstrom :-)
Jan 21 15:01:48 <mckoan> thorsten1: sounds good!
Jan 21 15:18:18 <Tomoe> 'bluetooth to ethernet gateway'?
Jan 21 15:19:48 <thorsten1> want to receive data from bluetooth and write them to ethernet 
Jan 21 15:20:35 <thorsten1> and also send data that comes from ethernet to an bluetooth device
Jan 21 15:21:49 <thorsten1> because of that i need a linux distribution with bluetooth stack , bluetz utils for at91sam9260-ek , i dont want to write a complete bluetooth stack :-)
Jan 21 15:22:54 <Tomoe> =)
Jan 21 15:28:16 <thorsten1> or has someone a linux distribution for at91sam9260-ek with bluetooth stack? :-)
Jan 21 16:04:53 <fgomez> this is a test 
Jan 21 19:20:41 <JoshMalone> big thank-you for kexecboot :)
Jan 21 19:24:02 <mimecar> hi
Jan 21 19:24:41 <JoshMalone> hello
Jan 21 19:26:11 <mimecar> hi JoshMalone
Jan 21 19:26:57 <JoshMalone> I'm just getting around to messing with my zaurus again
Jan 21 19:27:06 <JoshMalone> kexecboot makes it a lot easier
Jan 21 19:27:08 <mimecar> good news...
Jan 21 19:28:36 <JoshMalone> trying to find info on switching to 2008
Jan 21 19:28:47 <JoshMalone> 2008.whatever-is-out-there
Jan 21 19:29:23 <mimecar> I don't know waht's the angstrom status actually
Jan 21 19:29:32 <mimecar> several months without checking news..
Jan 21 19:30:31 <JoshMalone> I dunno where to find images for 2008
Jan 21 19:30:59 <mimecar> what's your model?
Jan 21 19:31:07 <JoshMalone> spitz (3100)
Jan 21 19:31:35 <mimecar> c3100 is spitz ?
Jan 21 19:31:56 <JoshMalone> c3100 is technically 'borzoi' but it's same as spitz just with more flash
Jan 21 19:32:07 <mimecar> there're not imates for 2008 :(
Jan 21 19:32:26 <JoshMalone> ah
Jan 21 19:34:18 <mimecar> it's posible you can build a 2008 image
Jan 21 19:39:55 <JoshMalone> there are 'unstable' 2008.1 images from like Dec 20 or so
Jan 21 19:40:01 <JoshMalone> I guess I can try one :)
Jan 21 19:40:17 <mimecar> :), good luck
Jan 21 19:40:32 <JoshMalone> with SD boot and kexec it's really easy :)
Jan 21 19:43:47 <mimecar> yes
Jan 21 19:52:08 <JoshMalone> okay - gpe 2008.1 test image boots but no input works (OS kbd or real kbd) :(
**** BEGIN LOGGING AT Thu Jan 22 01:14:15 2009
**** ENDING LOGGING AT Thu Jan 22 02:59:57 2009