**** BEGIN LOGGING AT Wed May 18 02:59:57 2011 May 18 07:41:50 Hi all May 18 07:44:14 I have a strange little problem, loosely related to angstrom. I'm working on a board support package for an NXP LPC3250 board (ARM 926ejs), and I have a working kernel with usb and framebuffer console on the LCD on board May 18 07:46:48 I used buildroot to build some basic rootfs, which works/boots fine. I want to change to Angstrom rootfs so I downloaded some images from narcissus May 18 07:48:01 the rootfs from narcissus on the other hand doesn't output anyting. The last line from kernel is "Freeing init memory", the kernel doesn't complain, the card reader blinks as it's doing something for 30 seconds May 18 07:48:18 but no output neither on serial nor on fb console May 18 07:48:48 kernel is EABI, inittab is configured to have logins on these devices May 18 07:49:19 do you have any idea what I might miss? May 18 07:51:13 hmm noone's here, I'll try the mailing list May 18 08:08:51 angstrom: 03Khem Raj  07master * r543651d904 10meta-angstrom/conf/distro/angstrom-2010.x.conf: May 18 08:08:52 angstrom: angstrom-2010.x.conf: Change uclibc PREFERRED_VERSION to match uclibc PV change May 18 08:08:52 angstrom: Signed-off-by: Khem Raj May 18 08:08:52 angstrom: Signed-off-by: Koen Kooi May 18 10:09:53 buenos días May 18 11:17:00 angstrom: 03testlab  07next * r1c8bd0e9cc 10testlab/beagleboard/GNOME-image/ (4 files): beagleboard: GNOME-image configured for angstrom v2011.05 using branch org.openembedded.dev and revision 359add3 May 18 11:17:11 angstrom: 03testlab  07next * ra3c56872b5 10testlab/beagleboard/console-image/ (4 files): beagleboard: console-image configured for angstrom v2011.05 using branch org.openembedded.dev and revision 359add3 May 18 12:24:52 hi all.. how to add a image like when angstrom distro boots in my custom rootfs May 18 12:26:22 i am so confused because it is definately not a kernel logo May 18 12:52:32 angstrom: 03Koen Kooi  07master * rc25bbe1ab7 10meta-angstrom/ (2 files in 2 dirs): May 18 12:52:32 angstrom: use blacklist class from meta-oe May 18 12:52:32 angstrom: Signed-off-by: Koen Kooi May 18 12:54:37 angstrom: 03Koen Kooi  07yocto * r552dc36c21 10testlab/ (56 files in 14 dirs): May 18 12:54:37 angstrom: move files into libc specific directories May 18 12:54:37 angstrom: Signed-off-by: Koen Kooi May 18 14:01:43 hwclock: cant open '/dev/misc/rtc': no such file or directory May 18 14:01:52 booting angstrom on ipaq 4350 May 18 14:02:03 hangs there May 18 14:02:15 the angstrom boot process seems to get 90% done though May 18 14:03:06 Strife89, ^^ May 18 14:03:35 thats where im at atm. about to mount the rootfs for changes May 18 14:13:26 CcSsNET: Hey there. :) May 18 14:13:47 * Strife89 won't be at the computer much May 18 14:14:20 And, at least you're close. :) May 18 14:14:23 Hopefully. May 18 14:15:34 how far did you get? May 18 14:15:42 Not very. May 18 14:15:53 :-/ May 18 14:16:18 It doesn't help that I spent a lot of last night troubleshooting my laptop. May 18 14:17:35 well i just created a symlink to it May 18 14:17:40 it was at /dev/rtc May 18 14:19:06 Around lunchtime I might have a chance to fiddle with it some more May 18 14:19:10 Hopefully May 18 14:22:02 well didnt help still cant find it May 18 14:22:10 time to remove that from boot scripts May 18 14:32:38 i guess ill minimize init scripts till i get a prompt :- May 18 14:32:43 :-/ May 18 14:41:14 hi May 18 14:41:30 I'm trying to connect with a CF wifi card May 18 14:41:43 now I ave internet conection by usb May 18 14:42:24 wich packages and config are needed to connect with wifi? May 18 14:42:34 ah, checked the /var/log/Xorg.0.log May 18 14:42:51 xorg is failing to load because /dev/tty0 dont exist May 18 14:42:56 heh udev failing? May 18 14:43:15 * CcSsNET pokes around more May 18 14:43:50 I used to e¡conect using wifi but I don't remember how May 18 14:44:11 it was using hostap I think May 18 14:44:22 lsmod May 18 14:44:28 ifconfig May 18 14:44:36 /etc/resolv.conf May 18 14:44:39 iwconfig May 18 14:44:47 it doesn't detect my card May 18 14:44:52 hmm May 18 14:45:00 which card? May 18 14:45:05 check if kernel supports May 18 14:45:11 it was solved by same in that thread May 18 14:45:17 http://www.oesf.org/forum/index.php?showtopic=25816 May 18 14:45:39 changing the manfid in the module May 18 14:46:09 but in debian andromeda works fine as eth1 with orinoco drivers May 18 14:46:24 maybe I can use it for Angstrom May 18 14:47:37 it's a canon k30225 card May 18 14:47:52 anyone uses it? May 18 14:48:47 usb connection is fine but wifi would be great May 18 15:01:45 I'm doing an ipkg update but it so slow May 18 15:01:57 maybe it's using wrong feeds? May 18 15:02:17 so so slow .__. May 18 15:22:57 CcSsNET: wich feeds do you have? May 18 15:38:39 cannot stat: '/etc/udev/saved.uname' input/output error May 18 15:38:45 current bug working on May 18 15:38:50 feeds id have to check May 18 15:40:46 or maybe my sd card be dieing. input output error? hehe May 18 15:40:50 we'll see May 18 16:02:52 well im retrying without udev. udev i think is the current issue May 18 20:56:47 angstrom: 03testlab  07master * rc495e158b5 10testlab/at91sam9m10g45ek/console-image/ (4 files): at91sam9m10g45ek: console-image configured for angstrom 2011.03 using branch 2011.03-maintenance and revision 9f13730 May 18 21:57:16 angstrom: 03testlab  07yocto * ra62416b05a 10testlab/beagleboard/eglibc/console-image/ (4 files): beagleboard: console-image configured for angstrom v2011.05-core using branch master and revision 617201e8dabe58c1d34bfd578ddcb1bfd6bb6922 May 18 23:09:48 I have a QA staging issue with Qt4-native-4.7.3. Anyone up for that challenge? **** ENDING LOGGING AT Thu May 19 02:59:58 2011