**** BEGIN LOGGING AT Fri May 25 02:59:59 2012 May 25 10:23:58 Hey, does anyone know the status on the usb dive nonexisting /dev/sda issue in kernel 3.2.14? May 25 10:31:47 anywone know how could I contack Koen Kooi? May 25 10:35:41 poke him on #beagle? May 25 11:12:29 thanks dm8tbr, I'll try May 25 12:54:37 I built the systemd-gnome-image successfully for my beagleboard using oe-core. However, when booting my beagleboard xM, it appears to hang after registering smsc95xx with usbcore. What am I doing wrong? May 25 13:10:18 cboyd: yeasterday i'm build systemd-gnome-image May 25 13:10:21 for my bb xM May 25 13:10:29 after 30 minutes all works well May 25 13:11:22 all its 'hang' but if you look the led you see activity...that for my bb...maybe your have problems :P May 25 13:15:34 stuk_gen: thanks. I didn't mean to post that again May 25 13:15:52 cboyd: now are you running beagleboard? May 25 13:16:17 no I am work working on the dm8148 platform May 25 13:17:53 cboyd: ok, so i'm repeat to you this message...check the led...if its blink all its run and you only have to wait :) the first time the gnome booting is very slow May 25 14:33:51 I can't seem to be able to contact koen May 25 14:34:04 is tehere anyone here using hx4700 for advice? May 25 14:57:46 wiselynx: are you using angstrom oe to build image? May 25 15:09:40 stuk_gen, it's what i'd want to do May 25 15:09:48 i'm having some issues thoguh May 25 15:10:13 the worst one in this moment is not oe related.. May 25 15:11:00 I'm using SDG bootloader, and I fera I put a non working 3.1 kernel and bricked the poor thing May 25 15:51:42 wiselynx: unlikely bricked unless SDG bootloader is not setup to handel serial access May 25 15:52:05 in which case youll need jtag access, asuming the device is maped for such May 25 15:52:49 hx4700? that an ipaq? May 25 15:52:50 I don't think SDG bootloade handles serial access May 25 15:52:57 yes, it's an ipaq May 25 15:53:00 ugh May 25 15:53:01 the problem is May 25 15:53:07 i gave up on ipaq a while ago May 25 15:53:09 the bootloader works just fine, May 25 15:53:10 good luck May 25 15:53:19 but passes control to the non functional kernel May 25 15:53:24 and there hangs May 25 15:53:41 well are you not trying a sd boot? May 25 15:53:52 that's strange May 25 15:54:05 there is no "sd boot" option May 25 15:54:22 i mean, personally, i would get SD booting kernel perfected before i flash the internal rom May 25 15:54:37 well you need a diferent bootloader for the sd option May 25 15:54:42 but probably to late now May 25 15:54:50 yep, late May 25 15:54:56 I'll have to use jtag i fear May 25 15:55:05 I already found some fearsome instructions May 25 15:55:14 next time, try sd booting a kernel first May 25 15:55:18 and a plain old bootloader May 25 15:55:19 or the least damaging tests May 25 15:55:23 :) May 25 15:55:27 damaging test? May 25 15:55:38 well what you did was a damaging test May 25 15:55:42 lo May 25 15:55:44 l May 25 15:55:47 .. ok May 25 15:56:20 well, i forget the name of the wince bootloader but youll want that most likely May 25 15:57:16 they way i booted angstrom on my ipaq was the wince exe bootloader on a internal flash storage. and then a linux formated sd card May 25 15:57:39 but i sold that ipaq for i think 60$ May 25 15:57:48 ended up getting an open pandora May 25 15:59:34 but ipaqs are a pain in the ass. and no offense to devs here.. but so in angstrom/open embedded. May 25 15:59:40 * ccssnet points at bitbake May 25 16:02:36 ccssnet, i totally agree with you May 25 16:03:11 i'm a gentoo user and i'm not scared of recompiling things.. but bitbake is very hard to understand, and badly documented May 25 16:03:37 if only there was a decent gentoo support for crosscompiling.. id' totally go in that direction May 25 16:03:48 wiselynx: check pm May 25 16:03:55 but there is too few documentation (in russian moreover..) May 25 19:03:13 hi everybody! May 25 19:03:29 seems like I finally managed to unbrick my hx4700 May 25 19:04:00 the issue seemed to be.. not enough power on the battery, nor enough from the USB cradle May 25 19:04:15 doing it with the main power adapter did the trick May 25 19:04:55 now, following phase: anyone with experience of compiling and running a recent image and kernel on hx4700' May 25 19:05:00 ? May 25 23:15:21 my keyboard and mouse are not working using the systemd-gnome-image on the beagleboard xm. Does anyone have any ideas what could be wrong? **** ENDING LOGGING AT Sat May 26 02:59:57 2012