**** BEGIN LOGGING AT Wed Aug 06 02:59:59 2014 Aug 06 09:37:02 vvu: av500 https://www.youtube.com/watch?v=drMWtB0ipd0 Watch at 2x Aug 06 09:38:55 so you fixed the y coordinate stuff? Aug 06 09:40:00 Yep. Aug 06 09:40:23 why is the send button so hectic clicking ? Aug 06 09:40:35 Oh. I was clicking ;) Aug 06 09:40:44 ah so no auto refresh? Aug 06 09:40:56 I will use a thread that does the auto refresh. Aug 06 09:41:04 just poll the pipe if it has data read Aug 06 09:41:56 I will simply have a thread that does continuous updates. Aug 06 09:42:04 yep Aug 06 09:42:11 any other errors now? Aug 06 09:42:49 No errors with working of display but I'm not able to unload the driver :/ Aug 06 09:43:16 did you disconnect the tablet? Aug 06 09:43:29 Even after disconnecting device, there are continuous calls to driver and logs. Aug 06 09:43:41 So, rmmod says module in use. Aug 06 09:43:54 That's only on Bone. Not on PC. Aug 06 09:44:01 mhmh Aug 06 09:44:10 * vvu just received a 4GB bbb Aug 06 09:44:37 I will look into that thing later. Aug 06 09:44:56 I have a journey tonight. Aug 06 09:47:52 mouse events any chance to get them? Aug 06 10:05:55 praveendath92: ^ Aug 06 10:11:41 I will try with a usb hub for now. Aug 06 10:11:46 And see if that works. Aug 06 10:12:13 vvu: BRB. I'm leaving for a while. Be back in an hour or so. Aug 06 10:12:27 oki Aug 06 12:09:31 * karki aah zzz Aug 06 12:10:24 * Abhishek_ sounds alarm Aug 06 12:10:52 * karki hits the snooze button Aug 06 12:11:16 (the snooze button is a dummy :P) Aug 06 12:12:11 void snooze() {printf("Patches are welcomed!\n");} Aug 06 12:12:27 exit(0) Aug 06 12:12:29 ; Aug 06 14:45:52 HEY jkridner, when you have some time could you try connecting a BBB to this tutorial: http://diegotc.github.io/bone101/Support/GSOC/views/tutorial.html?gistid=eac17d013b3a7c335a19#3 Aug 06 14:50:52 DiegoTc: I'm on firefox and unable to type IP address properly in the run script modal Aug 06 14:51:12 although I used some jQuery on the console to set the IP field and it runs OK Aug 06 14:51:36 Abhishek_: No ip is necessary Aug 06 14:51:37 Hi jkridner . How has it been over the last week? Aug 06 14:51:48 it will load automatically like bone101 Aug 06 14:52:19 thanks Abhishek_ ! Aug 06 14:53:42 DiegoTc: I'm not able to observe expected behavior on the thing that you've taken from bone101. Aug 06 14:54:34 * DiegoTc wish to have his BBB right now. I did all my test on chrome :( Aug 06 14:55:00 lemme send you a screenshot Aug 06 15:16:14 Please Abhishek_ Aug 06 15:19:37 DiegoTc: http://s18.postimg.org/xiuuof3ev/Screenshot_from_2014_08_06_20_47_21.png Aug 06 15:20:15 THANKS Abhishek_ B Aug 06 15:20:46 alexanderhiam: where should I put the example with the motion sensor and snapshot ? Aug 06 15:21:03 I mean in the examples folder itself? Aug 06 15:31:09 rseethamraju: I think that makes sense Aug 06 15:32:10 alexanderhiam: so it should mail the pic right? Aug 06 15:32:23 https://docs.python.org/2/library/email-examples.html Aug 06 15:32:34 yeah I think that would be cool Aug 06 15:34:31 alexanderhiam: email in the example or do a function somewhere? Aug 06 15:35:16 I think just in the example would be fine Aug 06 15:36:58 ok Aug 06 15:51:00 meeting time ? Aug 06 15:52:01 vvu: I'm guessinh 9 minutes are missing Aug 06 15:52:28 yeah, just a few minutes Aug 06 15:55:46 rseethamraju: where are you going to publish your examples? I will like to pass then to bone101 Aug 06 15:56:07 hope there's no problem with that rseethamraju Aug 06 15:58:06 Hi all Aug 06 16:00:26 hi all Aug 06 16:00:35 welcome to high noon! Aug 06 16:00:39 (for me anyway) Aug 06 16:00:48 * jkridner looks for reports Aug 06 16:00:56 last reports before pens down!!! Aug 06 16:01:15 pens down keyboards up Aug 06 16:02:23 Hello jkridner Aug 06 16:03:05 praveendath92, Abhishek_, DiegoTc, rseethamraju, karki: thanks for being here Aug 06 16:03:10 :) Aug 06 16:03:17 and thanks for all your contributions to this point. Aug 06 16:03:33 :) Aug 06 16:03:35 I'm hopeful all of you are looking at bug fixes and clean-up over the weekend for the pencils down. Aug 06 16:03:42 yep! Aug 06 16:03:57 Yes. Aug 06 16:04:04 Yes. And documentation too. Aug 06 16:04:15 vmayoral isn't here, but his report indicates that he's on schedule and tridge seems to be happy. Aug 06 16:05:56 DiegoTc: thanks for the report. it didn't seem to include the latest links for testing. Aug 06 16:06:20 DiegoTc: http://diegotc.github.io/bone101/Support/GSOC/app/views/index.html is broken Aug 06 16:06:34 jkridner: I was sleepy :( here it's http://diegotc.github.io/bone101/Support/GSOC/views/index.html also I got confused when I was explaining the live code Aug 06 16:06:38 hmmmm Aug 06 16:06:48 you can re run the code, without refreshin the page Aug 06 16:07:17 I'm 99% sure you can't create a tutorial, assuming you never deleted the gist I told you Aug 06 16:07:44 you can re run the code and stop the code, without refreshin the page Aug 06 16:08:01 DiegoTc: no problem Aug 06 16:08:19 rseethamraju: let me know when you have then :0 Aug 06 16:08:22 :) Aug 06 16:08:36 DiegoTc: I'll hang on afterwards to provide some final testing... Aug 06 16:08:50 DiegoTc: I know you are looking at some clean-up and code review.... Aug 06 16:08:59 but, otherwise, you aren't looking to add any more functionality, right? Aug 06 16:09:25 jkridner: I think I have it all, or did I miss something? Aug 06 16:10:07 please let me know, I think I have it all. I can be wrong. Haven't sleep a lot this last weeks Aug 06 16:10:46 DiegoTc: I’m posting it in PyBBIO’s examples now and they use PyBBIO’s libraries. Will that work out for you? Aug 06 16:11:10 yes, the only thin is that you will not run it live, but they can be added Aug 06 16:11:17 the code card has python language Aug 06 16:11:40 DiegoTc: on Monday, can you start work on recording a screencast that demonstrates all the features? Aug 06 16:11:57 jkridner: yes! Aug 06 16:12:03 DiegoTc: thanks! Aug 06 16:12:28 jkridner: the only I couldn't do was the search :( Aug 06 16:12:34 rseethamraju, praveendath92, karki, Abhishek_: I'll also be looking for final-report videos after the pencils down date. Aug 06 16:12:52 ok Aug 06 16:12:58 but I did the pagination, that way you don't have to scroll down Aug 06 16:13:17 jkridner: one video, or can they be several videos? Aug 06 16:13:50 DiegoTc: My preference is a single video. If you do multiple videos, make sure there is a main video that links to the subvideos. Aug 06 16:13:56 jkridner: With explanation or a demo of working version? Aug 06 16:14:48 Sure jkridner Aug 06 16:14:51 jkridner : hard or soft dates? Aug 06 16:15:29 karki: its after Aug 06 16:15:44 after hard date? Aug 06 16:16:19 you can post it b4 I think Aug 06 16:16:28 I thought, before hard deadline Aug 06 16:16:31 DiegoTc: http://youtu.be/DCGFOuPB6Kc?t=6m11s has an example of links to subvideos Aug 06 16:16:33 oh never mind Aug 06 16:16:41 praveendath92: demo, then explanation. Aug 06 16:16:51 hard date is get your code completed and into a public repo Aug 06 16:17:06 rseethamraju, karki: after. Aug 06 16:17:23 jkridner: where will the code be merged? Aug 06 16:17:36 that is, the videos aren't as important as wrapping up the code and making sure the repos are good. Aug 06 16:17:48 DiegoTc: yes, but I can't say exactly when. Aug 06 16:18:06 how are you planning to show it on http://beagleboard.org/ ? Aug 06 16:21:00 guess that path wasn't workable ;) Aug 06 16:21:59 ugh. computer overheated and shutdown Aug 06 16:22:03 no scrollback... what did I miss? Aug 06 16:22:07 any questions still about when to do the videos? Aug 06 16:22:54 how are you planning to show it on http://beagleboard.org/ ? Aug 06 16:22:56 how are you planning to show it on http://beagleboard.org/ ? Aug 06 16:23:00 oops Aug 06 16:23:24 jkridner: how are you planning to show it on http://beagleboard.org/ ? remembering the oauth service bone101 is using right now Aug 06 16:23:34 just for 500 users Aug 06 16:24:00 DiegoTc: I will launch another instance of the oauth service. Aug 06 16:24:13 And clone the static content to beagleboard.org Aug 06 16:24:31 I'm planning on trying to make a move to Jekyll for the beagleboard.org source first. Aug 06 16:24:46 I think that'll make contributions to beagleboard.org easier for most people. Aug 06 16:25:31 Cool :) Aug 06 16:26:34 praveendath92, rseethamraju, DiegoTc, karki, Abhishek_: any other questions about project final-report videos? Aug 06 16:26:44 finish the code and docs, then do the videos. Aug 06 16:26:58 jkridner: can we talk after the meeting or are you bussy? Aug 06 16:27:07 (and make sure the code is uploaded to a proper public repo to finish the code/docs) Aug 06 16:27:19 DiegoTc: I'll hang on. Aug 06 16:27:32 no more doubts Aug 06 16:27:37 ok, I will wait Aug 06 16:28:07 everything more or less working? Aug 06 16:28:10 praveendath92: seems like adding compression is still a major coding task. Aug 06 16:28:31 ds2: who is that question for? Aug 06 16:29:21 jkridner: I have a standalone, tested working, code. Aug 06 16:29:35 It would be one day work mostly. Aug 06 16:29:49 praveendath92: any risk on completing before pencils down and still having time for clean-up? Aug 06 16:30:25 Cleanup is supposed to be done before pencils down? Aug 06 16:31:45 jkridner: in general...all students Aug 06 16:32:02 praveendath92: you should only be documenting after soft pencils down, but some fixing of issues found in documentation is tolerable.... Aug 06 16:32:08 praveendath92: pencils down == code freeze Aug 06 16:32:10 you shouldn't be "coding" after soft pencils down. Aug 06 16:32:20 including clean-up Aug 06 16:32:56 jkridner, I will be able to cleanup also before the pencils down. Aug 06 16:32:57 so, please do your clean-ups before Monday. Aug 06 16:33:10 ok! Aug 06 16:33:27 I should have been done 2 days ago :( darn kernel Aug 06 16:34:52 praveendath92: all good? Aug 06 16:34:53 jkridner: Did you get a chance to see the video? (2nd one in particular) Aug 06 16:35:19 praveendath92: yes, I'm excited by https://www.youtube.com/watch?v=drMWtB0ipd0, though do note it is a bit slow Aug 06 16:35:31 lots of flashing of the "send" button Aug 06 16:35:54 Yep :) It's just that I made some last minute mods to compression scheme. Aug 06 16:36:08 Couldn't include it in this report. Aug 06 16:36:20 * jkridner wishes there was some kind of mouse emulation Aug 06 16:36:29 not sure how you are launching those apps Aug 06 16:36:45 Oh, ignore the send button, I'm using it for a manual refresh. Silly! I was pressing it ;) Aug 06 16:36:56 From ssh Aug 06 16:37:22 I can launch apps on a screen. Aug 06 16:37:35 karki: so, how is the driver split coming? Aug 06 16:37:45 the split works Aug 06 16:37:47 but Aug 06 16:37:51 not for pru1 Aug 06 16:37:56 karki: guess the instructions to Chris Rogers never happened? Aug 06 16:38:05 alexanderhiam: ping ^^^ Aug 06 16:38:08 i.e. DIO works but PWM does not Aug 06 16:38:25 jkridner : nope , it didn't happen :( Aug 06 16:38:30 right, I can look at the pwm today Aug 06 16:38:35 panto: any ideas why the PRU1 code won't run? Aug 06 16:38:45 jkridner, I replaced the send button thing with auto refresh. So, assume there is no send button and the rest as you see in the video. Aug 06 16:38:53 praveendath92: do you need some help from me ? Aug 06 16:38:55 karki: I look forward to a pull request for the kernel... Aug 06 16:38:55 ned to go home now Aug 06 16:39:02 still at work here :) Aug 06 16:39:16 all: note that we now have a normal kernel tree at http://github.com/beagleboard/linux ! Aug 06 16:39:31 ds2: ^^^ Aug 06 16:39:33 * Abhishek_ had seen that Aug 06 16:39:42 jkridner, nope Aug 06 16:39:48 panto : I tried hard to figure it out, but to no avail! I think the possible problem is pinmux Aug 06 16:39:48 vvu: Yes. Testing with your device. Aug 06 16:39:56 mail me instructions :) Aug 06 16:40:02 panto: k. do you have an example with code loaded into PRU1? Aug 06 16:40:06 and 2morrow the latest i can try Aug 06 16:40:08 if not tonight Aug 06 16:40:16 panto: maybe karki can work forward from it. Aug 06 16:40:21 panto : according to the log message pru1 is loaded and running. Aug 06 16:40:23 I updated them in the repo readme. Aug 06 16:40:35 ok, will try them Aug 06 16:40:41 "normal"? heh Aug 06 16:40:41 but 1st need to get out of the office Aug 06 16:40:43 talk soon Aug 06 16:40:47 the original example had both PRU & PRU1 working Aug 06 16:40:57 git diff will tell the story Aug 06 16:40:59 Forgot to mention that in the report. It took quite sometime to neatly write them ;) Aug 06 16:41:02 karki: maybe read the cycle counters to see if the code is running? Aug 06 16:41:15 isolate pinmux from the PRU part Aug 06 16:41:50 ds2 : I just replaced the pru1 code with "__R30 = 0xFF; while(1);" Aug 06 16:41:56 vvu: sure. Tomorrow works fine. I will be travelling whole tomorrow so, I may be on and off on irc but I shall be working. Aug 06 16:42:04 karki: is this sw PWM or PWM from the onboard timer? Aug 06 16:42:08 yet it isin't giving the expected output Aug 06 16:42:20 ds2 : sw pwm Aug 06 16:43:01 karki: hmmm that does sound like pinmux. you aren't doing HDMI or such, right? Aug 06 16:43:05 and no LCD Aug 06 16:43:09 correct? Aug 06 16:43:17 yeah, no lcd Aug 06 16:43:42 there is no problem with the previous driver I wrote Aug 06 16:43:45 karki: go through the pinmux in the DT Aug 06 16:43:54 PWM was working Aug 06 16:43:55 unless panto has a better idea :D Aug 06 16:44:15 karki: do you have a scope (or access to one)? Aug 06 16:44:17 karki: the overlay hasn't changed since the working version though, right? Aug 06 16:44:29 alexanderhiam : it has Aug 06 16:44:38 that could be the problem Aug 06 16:44:55 but I don't see how/where the problem could arise ! Aug 06 16:44:56 diff... diff... diff your cares away Aug 06 16:45:15 ah, try the old overlay... and listen to panto and git diff! Aug 06 16:47:35 karki: please stay around and try to resolve this today. Aug 06 16:47:36 I did diff, but the thing is that the changes were big between old and new driver. And I couldn't find the possible cause even after diff Aug 06 16:47:44 gimme 10 min Aug 06 16:47:58 I want to check the pin mux again Aug 06 16:48:04 rseethamraju: seems you still have many more plans, is that right? Aug 06 16:48:35 rseethamraju: looks like you had some good progress, but I'm concerned you are still trying to do too much before good clean-up/integration... Aug 06 16:48:42 not sure if the pip stuff is done, for example. Aug 06 16:48:54 what pip stuff? Aug 06 16:49:03 rseethamraju: I guess alexanderhiam was taking care of it... Aug 06 16:49:06 pip stuff is done Aug 06 16:49:22 the examples won’t take that long Aug 06 16:49:26 1 per day Aug 06 16:49:30 rseethamraju: just wondering if all your improvements are going to be cleaned-up/included. wouldn't want any of the work to go to waste. Aug 06 16:49:33 I did everything else Aug 06 16:49:39 jkridner: rseethamraju has been cleaning / documenting / writing examples along the way Aug 06 16:49:47 rseethamraju: k. feel comfortable about code quality all the way. Aug 06 16:49:49 alexanderhiam: thanks! Aug 06 16:49:53 only the webcam has to be added Aug 06 16:50:00 I don't accept undocumented pull requests ;) Aug 06 16:50:31 rseethamraju: as long as there isn't last minute clean-up integration stuff. if you've been giving pull requests and getting them merged upstream along the way, then we are likely in good shape! Aug 06 16:50:48 and documentation is the only thing left for webcam Aug 06 16:51:02 shouldn't be anything risky remaining with only a few days of coding/clean-up left. Aug 06 16:51:07 only webcam’s left Aug 06 16:51:31 k. Aug 06 16:51:34 jkridner: yeah, the majority of rseethamraju's code is already merged on Github and in the pip version Aug 06 16:51:45 sweet! Aug 06 16:51:46 ie documentation that I’ll finish webcam tonight Aug 06 16:51:58 then only examples Aug 06 16:52:02 alexanderhiam: we'll need to make sure we are pulling it into the new images. is it in the 8-4 image? Aug 06 16:52:26 and since libraries are already done, examples hsouldn’t take long Aug 06 16:52:49 jkridner: not that I know of, I've been waiting to bump into rcn-ee on irc to mention it Aug 06 16:53:34 alexanderhiam: best way to bump into him is e-mail. Aug 06 16:53:49 alexanderhiam: prehaps they should be documented as "trojan 1", "trojan 2".... Aug 06 16:53:59 jkridner: is a pip installation ok? i.e. chroot installed with pip when building as opposed to a proper debian package Aug 06 16:54:44 alexanderhiam: yes, that's how we are doing it with Adafruit_BBIO Aug 06 16:55:02 ok cool, I'll shoot Robert an email then Aug 06 16:55:18 alexanderhiam: a proper Debian package is still desired, but not needed to get it included at the start. Aug 06 16:55:58 jkridner: it's on my to do list, but I have to learn how to do it first... Aug 06 16:55:58 jkridner: Sorry but I may have to leave early today. Need to catch a train in 1 hour (26 hour journey ahead :/) Aug 06 16:56:30 Abhishek_: any more thoughts on the connection reset issue? Aug 06 16:56:38 Abhishek_: is it not stable? Aug 06 16:56:41 alexanderhiam: I checked the fan, relay stuff too. turns out my college made this pcb that converts the 3.3V to work with the relay. Aug 06 16:57:21 jkridner: it's stable, but just an annoyance as alerts come by quickly. Data received is okay Aug 06 16:57:46 Abhishek_: when does connection reset happen? Aug 06 16:58:13 jkridner: just after the data is received and parsed Aug 06 16:58:35 Abhishek_: and it is merely an annoyance? Aug 06 16:58:53 yeah, no impact on received data. Aug 06 16:59:05 Abhishek_: smaller data sizes help the issue? Aug 06 16:59:15 rseethamraju: you could really do that example with just LEDs as a proof of concept, demonstrating both heater and fan control for under/over temp Aug 06 16:59:24 feeling it is due to single-threaded nature? Aug 06 16:59:43 Abhishek_: as in, socket.io connection lost due to rendering of WaveDROM? Aug 06 17:00:05 * jkridner feels the longer term solution is likley to put socket.io connection under a webworker. Aug 06 17:00:06 I think so, but IIRC it occurs even without render Aug 06 17:00:09 alexanderhiam: ok. That’ll be easier Aug 06 17:00:50 jkridner: https://github.com/abhishek-kakkar/BeagleLogic/blob/master/beaglelogic-server/app.js Aug 06 17:00:54 Abhishek_: seems you still have many coding items. Aug 06 17:01:01 or write up a proper C backend Aug 06 17:01:11 sigrok-web ;) Aug 06 17:01:25 rseethamraju: and these two demo programs should be demonstrated in your video Aug 06 17:01:48 jkridner: they would involve writing a jQuery selector and constructing a command line Aug 06 17:01:59 from the array of checkboxes you see there Aug 06 17:02:07 ds2: that is needed, but wouldn't necessarily help with moving the data push and rendering to different threads. Aug 06 17:02:29 alexanderhiam: oh! ok. I can take the video from my phone? Aug 06 17:02:34 jkridner: HTML source for your reference: https://github.com/abhishek-kakkar/BeagleLogic/blob/master/webapp/index.html Aug 06 17:02:43 Abhishek_: so those will be wrapped-up today/tomorrow? Aug 06 17:02:56 jkridner: hmm? I am thinking having most of the work done in that C backend. browser goes to localhost:xyz to avoid all these socket stuff Aug 06 17:03:01 Abhishek_: giving you time over the weekend to make sure you are happy with the final state of the code? Aug 06 17:03:05 I would say this weekend Aug 06 17:03:17 yeah Aug 06 17:03:48 rseethamraju: sure, they're just good examples of the stuff you added and should be shown running Aug 06 17:04:05 * Abhishek_ has done most of the web interface work on weekends Aug 06 17:04:37 ds2: wouldn't you still want the data to be dynamic or are you talking about making that somehow be embedded into the content? graphical or WaveDROM? Aug 06 17:05:01 alexanderhiam: then more then the temp sensor, something with the accelerometer would be more cool Aug 06 17:05:22 jkridner: long term solution is a Canvas on the frontend and a C sigrok+WebSocket backend Aug 06 17:05:30 ds2: I was feeling the C backend would still use websockets. Aug 06 17:06:19 jkridner: I am taking about making the backend provide things as if it was the webserver Aug 06 17:06:31 rseethamraju: you could use the accel to trigger a photo too, i.e. PIR motion detection + shake detection security cam Aug 06 17:06:40 I did wonder if I could move most of the signal processing stuff onto JS on the PC, and just utilize the backend as a data transport dummy. Aug 06 17:06:42 ds2: but what would be the data representation in the page? Aug 06 17:06:56 ds2: I mean, the browser still needs to render something Aug 06 17:07:04 alexanderhiam: shake detection security cam? Aug 06 17:07:07 SVG, Canvas, etc. Aug 06 17:07:07 jkridner: PNGs like a slippery map but in 1 axis Aug 06 17:07:22 jkridner: a custom Canvas component Aug 06 17:07:34 alexanderhiam: oh it’ll tell you if someone tries to tamper with it? Aug 06 17:07:50 WaveDrom just inflates the HTML DOM, making it very sluggish with more number of samples Aug 06 17:08:09 rseethamraju: right, and the email sent with the photo could say which event triggered it Aug 06 17:08:43 ds2, Abhishek_: PNG vs. Canvas, fight! ;-) Aug 06 17:09:41 ds2: client side should have faster rendering if data representation can be efficient. Aug 06 17:09:44 Canvas would make for an interface with cursors markers etc. Aug 06 17:09:49 alexanderhiam: this one’s cool! Aug 06 17:10:29 jkridner: do you have any suggestions on how I could code the selectors and getting what I need (placeholder text/value/checked), given the HTML doc link I shared a few mins before Aug 06 17:10:56 rseethamraju: yeah, and the code will be small and simple! It'll be an awesome demo Aug 06 17:11:23 alexanderhiam: not really email’s code will clutter it Aug 06 17:11:38 alexanderhiam: I mean it won’t look that clean Aug 06 17:12:15 jkridner: it maybe....you also get to debug the entire stack ;) Aug 06 17:12:16 rseethamraju: shouldn't be that bad, just stick all the email stuff in its own function Aug 06 17:13:09 alexanderhiam: ok Aug 06 17:13:11 Abhishek_: what are the parameters? wouldn't you just use id's directly, ie $('#element')? Aug 06 17:13:33 alexanderhiam: https://docs.python.org/2/library/email-examples.html I can use this for email? Aug 06 17:14:21 jkridner: I could, but there are like 14 and I would prefer if there was a way I could select them by class, for example. https://github.com/abhishek-kakkar/BeagleLogic/blob/master/webapp/index.html#L274 Aug 06 17:14:27 ds2: in practice, would you use the web interface or sigrok? Aug 06 17:15:16 Abhishek_: oh, then why don't you? $('.pin-selector') seems easy enough to get an array. Aug 06 17:15:30 rseethamraju: this looks good: http://code.activestate.com/recipes/473810-send-an-html-email-with-embedded-image-and-plain-t/ Aug 06 17:15:45 jkridner: it depends - I have had to setup remote dev boards for people and a web interface can be easier to deal with over a VPN Aug 06 17:16:41 jkridner: there was also a thought of developing a USB kernel-mode gadget driver to add to the composite interface BeagleBone presents at #sigrok, and I found it interesting Aug 06 17:17:10 Abhishek_: that would be very useful. Aug 06 17:17:18 Abhishek_: thoughts on the selector? Aug 06 17:17:23 Abhishek_: that isn't too hard to do Aug 06 17:18:25 ds2, Abhishek_: we *are* going to wrap up the WaveDROM/socket.io stuff and put it to bed today, then pick up a post-gsoc project to improve throughput? Aug 06 17:18:29 jkridner: I'd going the class way, if there are any specific doubts, I'll let you know Aug 06 17:19:13 Let me clarify - I am not suggesting a big change at this point.... my ideas are post GSoC to make it more robust Aug 06 17:23:06 rseethamraju: what about this: http://alextrle.blogspot.com/2011/05/how-to-send-sms-message-with-python.html Aug 06 17:23:39 Abhishek_: making sure you aren't going to open up more coding as well. Aug 06 17:24:18 alexanderhiam: I did exactly that on http://github.com/jadonk/Dish-Detector Aug 06 17:24:39 alexanderhiam: https://github.com/jadonk/Dish-Detector/blob/master/test-sink-and-email.py Aug 06 17:24:45 works nicely for sending SMS Aug 06 17:24:52 jkridner: oh yeah! rseethamraju: reference that ^ Aug 06 17:25:05 alexanderhiam: should be coming out in a Make weekend project this month. Aug 06 17:25:08 jkridner: thanks Aug 06 17:25:10 jkridner: the code on the render & socket.io can be considered done, just need to add the selectors for the pins, and I should wrap up the code by this weekend Aug 06 17:25:15 jkridner: awesome! Aug 06 17:25:20 jkridner: who's our delegates to HQ this year? Aug 06 17:25:40 alexanderhiam: only for at&t nos? Aug 06 17:26:01 Abhishek_: k, hopefully the disconnect/connect can be documented and made a clean experience for the user. Aug 06 17:26:23 rseethamraju: you need to use different gateways for each provider Aug 06 17:26:24 k Aug 06 17:26:36 rseethamraju: I just happen to have an AT&T account. Aug 06 17:26:40 rseethamraju: http://martinfitzpatrick.name/list-of-email-to-sms-gateways/ Aug 06 17:27:05 jkridner: I’ll look for indian nos too. this will look awesome in the video Aug 06 17:27:07 I wonder if the att one would work for net10... Aug 06 17:27:12 rseethamraju: http://www.ukrainecalling.com/email-to-text.aspx Aug 06 17:27:18 scary URL. :( Aug 06 17:27:50 I'm sure there are better places to find that list. Aug 06 17:28:19 http://www.emailtextmessages.com/ Aug 06 17:28:25 would be great to wrap that list with an API. Aug 06 17:28:27 there's a lot of sites Aug 06 17:28:33 I can send a picture with a sms? Aug 06 17:28:36 cool Aug 06 17:28:49 rseethamraju: wish we had time for another library! maybe post gsoc Aug 06 17:29:04 rseethamraju: yes, my example does that. Aug 06 17:30:02 alexanderhiam: for what? Aug 06 17:30:11 the email and sms? Aug 06 17:30:58 so, we all wrapped-up? everyone cool with final code clean-ups before Monday? Aug 06 17:31:20 rseethamraju: yeah Aug 06 17:31:35 Please be prepared to update on documentation and plans-for/completed videos on next weeks' meeting. Aug 06 17:31:44 whoa this was a long meeting Aug 06 17:32:02 not too many more of them left. Aug 06 17:32:33 * jkridner lightly taps gavel and gives a smile of satisfaction Aug 06 17:33:31 alexanderhiam: I’ll do the example for now and if video gets over way before 20th, I’ll try email and sms libraries Aug 06 17:34:05 jkridner: give it a try to http://diegotc.github.io/bone101/Support/GSOC/views/tutorial.html?gistid=258d4471dd36c31107d4 with the BBB Aug 06 17:34:14 rseethamraju: ok :P Aug 06 17:34:30 need to see if it works to everyone Aug 06 17:34:36 jkridner: who's going to the GSoC event this year? Aug 06 17:34:47 DiegoTc: example runs. Aug 06 17:35:00 ds2: vvu, av500 and I'm in the lottery. Aug 06 17:35:13 ds2: did you apply for the lottery? Aug 06 17:35:30 jkridner: nah... no time. just wanted to see if we are one of those orgs Carol was complaining about Aug 06 17:35:46 DiegoTc: I can't enter text in the ip box on firefox/win7 Aug 06 17:35:48 I can meet folks for for a few hours but no time for the event Aug 06 17:36:11 alexanderhiam: do yuo have the BBB plug in? Aug 06 17:36:11 DiegoTc: when forking, I get an error that it doesn't exist Aug 06 17:36:29 ds2: oh, I missed the complaint Aug 06 17:36:35 praveendath92: ping Aug 06 17:36:43 DiegoTc: correction, I can't click in the text box to focus on it, but I can press tab until it gets focus and then I can type in it. Another element must be over top of it Aug 06 17:36:54 jkridner: she's saying the hotel might have lots of empty rooms Aug 06 17:36:57 ds2: oh, no, we'll have at least 2 Aug 06 17:37:03 we are full here Aug 06 17:37:07 many orgs are just declining on going Aug 06 17:37:58 alexanderhiam: same issue with me. I typed a jquery selector into the console :) Aug 06 17:37:59 jkridner: checking the fork Aug 06 17:39:19 * vvu just got his hands on a 4gb board :) Aug 06 17:40:00 jkridner: if you have 3 spare jumper wires around, you could run the web interface and see it in action Aug 06 17:47:34 Abhishek_: k Aug 06 17:47:45 DiegoTc: do I need to hang around longer? Aug 06 17:47:59 * jkridner would like to go eat the lunch he threw in the microwave Aug 06 17:48:16 * jkridner does git pull of latest BeagleLogic Aug 06 17:49:10 jkridner: almost done with the qt app for the flasher :) Aug 06 17:49:33 it's mainly a 1 button app with one progress bar Aug 06 17:49:41 as minimalistic as possible :) Aug 06 17:51:57 vvu: sweet! Aug 06 17:53:02 need to do more tests, just got a 4gb board from somebody who used my flahser and was pleased by it :) Aug 06 17:53:06 free of charge Aug 06 17:54:38 vvu: what OS is it on right now? Aug 06 17:54:56 debian i think Aug 06 17:55:10 vvu: the flasher is debian only? Aug 06 17:55:12 but that OS WAS on it :) just flahsed it fast with some random img.xz Aug 06 17:55:15