**** BEGIN LOGGING AT Tue May 19 02:59:59 2015 May 19 11:02:05 moto-timo pong May 19 13:53:43 * Abhishek_ received a FedEx package today May 19 13:59:54 good May 19 14:00:59 it could have been some samples for TI as well :P May 19 14:01:02 *from May 19 14:01:22 yeah, but it's the BBB :) May 19 15:03:51 my BBB arrived in Croatia as well May 19 15:04:03 good May 19 15:04:05 FedEx be faaaast May 19 15:04:19 which is good, since I'm sure they're not cheap :) May 19 15:04:42 * Abhishek_ hopes the shipping costs were not higher than that of the board itself May 19 15:05:53 Abhishek_: hope dies last, also knowing the lovely Croatian customs, they'll be sure to take their piece of the cake as well May 19 15:06:27 did they collect fees at the time of delivery? May 19 15:07:32 not sure yet. My mom picked up the packet and they needed the european import something number (EORI if I'm not mistaken) May 19 15:07:49 I'll ping back when I know the details if you're interested May 19 15:29:17 * ankur just received his beagle May 19 15:34:18 Abhishek_: small update, it says the sender pays all fees on the package, or so I'm told May 19 15:34:27 ankur: where're you currently located? May 19 15:35:02 neemo: Most likely that's the case, but it varies. May 19 15:35:16 so have to thank jkridner for that, fingers crossed the customs go easy on the package May 19 15:36:37 In case of private carriers like FedEx/DHL, customs is always paid or brokered as far as I am aware May 19 15:37:33 Abhishek_: yeah, depends on the sender, I've got my fair share of packages from Mozilla, all payed by sender May 19 15:37:52 then again, if the sender doesn't tick the fee box, it'll be dropped on the receiver May 19 15:38:46 or at least that was my experience May 19 15:40:24 Abhishek_: am located in bhuj, gujarat May 19 15:40:47 so boards starting to arrive... May 19 15:47:37 hi all... finally back from travel for a day or two. May 19 15:47:38 checking on some of the shipping stuff now. May 19 15:47:43 arianepaola_: what is the word on DHL? May 19 15:47:56 wow, coding starts Monday! May 19 15:48:09 I've heard this channel has been a bit quiet.... May 19 15:48:14 time flies fast May 19 15:48:29 vvu: you've been one of the few exceptions. :) May 19 15:48:51 this won't work if we are only hanging out here on Wednesdays. May 19 15:49:03 well i'm trying to keep the spirits up May 19 15:49:10 * jkridner is going to try to stick to office hours of noon-1pm US Eastern every day. May 19 15:49:11 and succeeding May 19 15:49:17 :-D May 19 15:49:38 arianepaola_: USPS then? May 19 15:49:54 moto-timo: got your emails, but busy with an exam tomorrow May 19 15:49:55 arianepaola_: do you have a way to start coding on Monday? I know you've been doing a bit already May 19 15:50:03 vvu: I figured as much May 19 15:50:12 will answer in a day or two May 19 15:50:17 vvu: I did a marathon session on Friday night and then crashed all weekend May 19 15:50:22 going for a small nap right now :) May 19 15:50:31 * moto-timo would love a small nap right now May 19 15:50:42 and it's only 8:50 am May 19 15:50:45 lol May 19 15:50:59 apaar : hows the development going ? May 19 15:51:32 * moto-timo needs to reboot May 19 15:52:49 * jkridner looks around for Ehab May 19 15:53:36 karki_ :slightly slow have been having pracs every alternate day(travel eats up 2 hrs one way and the exams are 3 hrs) but managed to get the board set up and understood the glue code for rproc in 3.8 and am trying to do the same for 3.14 May 19 15:53:58 should get the blog and elinux page tonight May 19 15:54:42 * apaar will be getting his board soon all costums issues got sorted out today May 19 15:55:17 customs* May 19 15:56:36 moin May 19 15:57:26 _av500_ :do we have to give a progess report from this week onwards or only once coding starts? May 19 16:22:59 jkridner: BBB arrived May 19 16:23:59 apaar : next week onwards! May 19 16:35:06 jkridner: Do you have an extra BBG? I'd like to test BeagleLogic with it May 19 16:53:50 It was on 19th May that GSoCers '2014 started coding :) May 19 17:02:52 <_av500_> apaar: once coding starts May 19 17:11:08 _av500_ , karki_ :thanks :) May 19 17:33:11 Abhishek_: great. Abhishek_, I'll work on getting you a BBG. May 19 17:34:07 moto-timo, arianepaola_: Did you see https://travis-ci.org/jadonk/beaglebone-getting-started? May 19 17:34:21 is there a way I can make the binaries downloadable with Travis-CI? May 19 17:35:30 alexanderhiam: obviously I'm never going to get these boards assembled. shall I ship you the boards and parts? any chance you can send me one back put together in exchange for me providing the PCBs and parts? May 19 17:35:53 shipping seems to be something I'm doing lately. :( May 19 17:37:13 jkridner: did a time lapse of assembling the newer cape here: https://www.youtube.com/watch?v=yT8oxQxe4fQ May 19 17:38:39 Abhishek_: supported by the out-of-box image yet? May 19 17:39:02 * jkridner looks around for rcn-ee May 19 17:39:20 * jkridner is frustrated by http://builds.beagleboard.org right now. May 19 17:39:30 not yet, seems to be some LCD configuration and/or signal integrity issues which I have to sort out. May 19 17:39:42 I've tried increasing the timeout... something must be bad with the xz operation. May 19 17:40:08 Abhishek_: well, you can still get the software working. :) May 19 17:40:21 I'm testing it with the circuitco BBView 7 cape overlay right now May 19 17:40:35 Also, have to sort out the capacitive touch as well May 19 17:41:44 People have used ribbon cables and standard breadboard wires to connect with such LCDs and it worked, so not really sure if it is SI at play here, this is a PCB May 19 18:04:00 jkridner: check https://github.com/moto-timo/BBBlfs/blob/osx/.travis.yml May 19 18:04:16 it has the deploy things there May 19 18:25:52 * jkridner reads http://docs.travis-ci.com/user/deployment/releases/ May 19 18:40:06 there is also a way to conditionally deploy May 19 18:40:14 I need to spend a little time on it May 19 18:40:39 Also looking into having travis-ci and buildbot exchange information somehow May 19 18:40:59 web API for both... so it should be possible May 19 18:44:22 one idea is buildbot sets the condition for travis-ci to build/deploy May 19 19:06:08 moto-timo: without the kext installed it is useless to run the binary May 19 19:06:14 i fixed the segfault you reported May 19 19:06:29 vvu: I assumed as much about the kext May 19 19:06:34 without the kext open_device_with_vid_pid will fail May 19 19:06:37 and everything will stop there May 19 19:06:49 wich osx are you running ? May 19 19:07:00 vvu: yosemite 10.10 May 19 19:07:30 you can enable dev mode for kexts May 19 19:07:34 to run unsigned ones May 19 19:07:47 makes sense. May 19 19:07:58 still waiting to hear from Apple about the certificate :) May 19 19:08:18 I'm optimistic ;P May 19 19:08:30 sudo nvram boot-args=kext-dev-mode=1 May 19 19:08:33 yeah May 19 19:09:21 * vvu waits for emails about a US visa... May 19 19:09:37 our gov't is both slow and methodical May 19 19:10:13 did not reach that part yet...waiting for some company to ship me DS-160 paper to get the J1 May 19 19:10:28 after i have those papers everything should be fast (hope so) May 19 19:10:43 location? May 19 19:12:02 SF May 19 19:12:05 brief internship May 19 19:12:25 three hours north of me. We should meet up :) May 19 19:12:34 i'm starting at the end of june but want to get visa from Germany May 19 19:12:51 if i get it from Romania (back home) it is really probable to get 2 year home residency thingie May 19 19:12:59 moto-timo: ur location ? May 19 19:13:22 California, near Pismo Beach May 19 19:14:47 not really far May 19 19:29:52 nerdboy: any thoughts on the PNI Mag3 or some alternative? May 19 19:34:24 didn' really find an alternate one May 19 19:34:29 +t May 19 19:35:29 nerdboy: yeah, same here May 19 19:36:22 I mean, as a test magnetometer it should work fine and if it was good enough for the RAX satellite it should be good for our needs May 19 19:37:24 and I've seen both much more expensive ones and some custom built ones used for different CubeSats, so in the end we should develop a universal algorithm to accomodate most of the possible sensors May 19 19:37:47 the biggest advantage the PNI has to other sensors and the IMUs is the sampling rate May 19 19:37:53 for data collection, but what about the imu magnetometer interface? slower data rate for reference noise *should* be okay, just need to test it i guess... May 19 19:39:41 it should be work, but testing it either way May 19 19:40:08 vvu: Which company are you interning for ? May 19 19:40:16 for the predictive compensation algorithms (eg. the correction factors) the actual endsensors doesnt matter, you just have to train it for that specific sensor May 19 19:41:14 for working with multiple sensor and correcting with both data sources, that will be tested out going forward May 19 19:42:59 vvu: how do I try out BBBlfs now that I have the kext installed? May 19 19:43:02 so a different sensor from the IMUs can't hurt, but all you need is to different sources May 19 19:45:09 jkridner: checkout osx branch May 19 19:45:15 it should have some instructions in the readme May 19 19:45:20 your's or moto-timos? May 19 19:45:23 run ./usb_flashed from bin/ May 19 19:45:27 to put the board into flashing mode May 19 19:45:38 from there you can use dd to dump any image to your /dev/rdiskN May 19 19:46:09 Abhishek_: swiftnav.com May 19 19:46:22 the only difference in mine is the .travis.yml automatically creates a tag and saves the .pkg as a release May 19 19:47:53 I'm running gentoo prefix instead of brew... May 19 19:48:00 do I really need autogen? May 19 19:48:59 vvu: nice, interesting product they have May 19 20:05:50 jkridner: yep May 19 20:05:58 i changed it a while ago to autogen May 19 20:56:37 vvu: why can't I run the ./configure to start? May 19 20:56:46 think it'll pick up all the wrong info? May 19 20:59:37 i don't get your question May 19 20:59:40 run ./autogen.sh May 19 20:59:43 then ./configure May 19 21:04:45 <_av500_> jkridner: ping May 19 21:04:56 _av500_: do you have an agenda? May 19 21:05:01 <_av500_> I can send one May 19 21:05:05 <_av500_> but its not much fttb May 19 21:05:07 I can run the meeting, but I need to know what to push people on. May 19 21:05:11 <_av500_> progress on bonding May 19 21:05:15 <_av500_> progress on videos May 19 21:05:17 coding starts Monday!!!! May 19 21:05:19 <_av500_> yes May 19 21:05:30 <_av500_> I will send a mail to mentors too May 19 21:05:42 we need to push to make sure bonding is already solid, videos are made and projects are ready to start coding. May 19 21:05:48 <_av500_> yep May 19 21:06:04 <_av500_> also push ppl to check the tracking numbers May 19 21:06:06 need help ? May 19 21:06:14 non-attendance needs to have a cost associated (extra work in presenting status, etc.), no? May 19 21:08:17 I think only arianepaola_ hasn't shipped. Most others should arrive soon. May 19 21:08:28 hasn't shipped why ? May 19 21:09:35 <_av500_> jkridner: good May 19 21:09:40 <_av500_> vvu: some address snafu May 19 21:09:52 <_av500_> address to mew for fedex May 19 21:09:54 <_av500_> new May 19 21:15:15 oh well May 19 21:21:09 I remember that by a week before the coding period, most of the videos were ready by this time May 19 21:21:20 last year **** ENDING LOGGING AT Wed May 20 02:59:59 2015