**** BEGIN LOGGING AT Fri Jun 28 02:59:57 2019
Jun 28 11:17:05 <embden[m]> sstabellini: ok, I will start at 5 p.m. UTC, I have workers repairing my building this week. But today they should finish it.
Jun 28 11:17:37 <embden[m]> Also, I will be available for the whole weekend
Jun 28 15:33:07 <vaishnav98_[m]> <vaishnav98_[m] "jkridner ravikp7: where should I"> if anyone else could provide any suggestions on how to disable the default mmc driver , it would be really helpful
Jun 28 15:40:16 <embden[m]> vaishnav98_:  why do you need to disable it?
Jun 28 15:52:42 <embden[m]> vaishnav98_:  I believe the right way to modify device tree is to either modify it via uboot using fdt commands or to modify the appropriate Linux'es ./arch/arm/boot/dts/*.dts device tree and recompile it. Though, I might be wrong
Jun 28 16:09:02 <vaishnav98_[m]> <embden[m] "vaishnav98_:  why do you need to"> embden : I need to modify the driver to add some debug messages, as it's a built-in module the changes I make are not getting reflected
Jun 28 16:09:12 <vaishnav98_[m]> <embden[m] "vaishnav98_:  I believe the righ"> embden : Thanks a lot for the information, will try it :)
Jun 28 16:22:31 <jkridner[m]> vaishnav98_: an overlay applied via /boot/uEnv.txt should be able to set the appropriate driver to be disabled.
Jun 28 16:24:44 <pranav_kumar[m]> today i got the swift register register that i had ordered from mouser electronics the ic are CD74HC299E ,CD74HCT299E, SN74F299N
Jun 28 16:27:43 <pranav_kumar[m]> it cost me extra Rs 1200 for delivery and Rs 1680 in custom duties for the IC of total cost  Rs 1350. The duties are really high in recent days
Jun 28 16:37:37 <pratimugale[m]> zeekhuge abhishek_ I get an error while installing the 'prussd' daemon on another sd card -> https://github.com/pratimugale/PRUSS-Bindings/tree/master/prussd.   "prussd.py" program runs correctly on the current sd card. The error -> https://pastebin.com/mAZASD0t. I tried solutions on the net but those didn't work
Jun 28 16:54:57 <vaishnav98_[m]> <jkridner[m] "vaishnav98_: an overlay applied "> jkridner: Thanks a lot , will try it now
Jun 28 16:56:51 <pratimugale[m]> <pratimugale[m] "zeekhuge abhishek_ I get an erro"> What might be the reason for this?
Jun 28 17:49:04 <zeekhuge[m]> pratimugale: it says something "non-root" Process
Jun 28 17:54:00 <pratimugale[m]> zeekhuge: That's the description that MuneebMohammed had given https://github.com/pratimugale/PRUSS-Bindings/blob/a87fc7dd27e0c1f62f78700674256ed41aefbd53/prussd/prussd.service#L2
Jun 28 17:55:27 <zeekhuge[m]> pratimugale: did you try starting prussd.py manually?
Jun 28 17:55:53 <zeekhuge[m]> Make sure that /tmp/prussd.sock does not exist
Jun 28 18:05:00 <zeekhuge[m]> pratimugale: ?
Jun 28 18:08:30 <pratimugale[m]> <zeekhuge[m] "pratimugale: did you try startin"> zeekhuge: Yes, there was a syntax error in the program. It was previously working because I was running the daemon in a different path than that of the repository and had copied the changes that I had made into the current repository
Jun 28 18:09:08 <zeekhuge[m]> So its resolved now. Yes?
Jun 28 18:11:08 <pratimugale[m]> I'll try the changes on the other sd card and let you know immediately
Jun 28 18:14:57 <pratimugale[m]> <zeekhuge[m] "So its resolved now. Yes?"> zeekhuge: Yes, it's working. Thanks
Jun 28 21:20:56 <embden[m]> julieng:  sstabellini  so, I got a bit further with a mapping from Iain's patch: https://pastebin.com/U0gch9us
Jun 28 21:21:09 <embden[m]> investigating
Jun 28 21:41:31 <sstabellini> embden[m]: I bet it is a very similar issue but with a different range of addresses
Jun 28 21:41:47 <sstabellini> embden[m]: can you find out the address causing the issue in _omap_sync32k_timer_init ?
Jun 28 21:53:45 <embden[m]> sstabellini: I am a bit confused with those: [    0.000000] irq: no irq domain found for crossbar@4a002a48 !
Jun 28 21:53:46 <embden[m]> [    0.000000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM
**** ENDING LOGGING AT Sat Jun 29 02:59:57 2019