**** BEGIN LOGGING AT Sat Oct 13 03:00:02 2012 Oct 13 04:04:05 i am building my first boot disk. How come the u-boot download is a .img file rather than a .bin? Oct 13 04:06:36 the extension isn't particularly important in linux as long as it is named as expected by MLO Oct 13 04:07:38 understood. how do I check that the files are self consistent? Can I edit MLO? Oct 13 04:13:16 MLO is a binary Oct 13 04:14:06 when you boot with the serial connection attached you will see if it successfully found u-boot or not Oct 13 04:14:46 okay. got to, i just try it, but I'll need to make sure I can see the messages Oct 13 04:14:53 if is says something along the lines of u-boot.bin not found you know what the filename it expected was Oct 13 04:15:10 very good info, thank you Oct 13 05:31:03 thanks ipv4, 2^64 - 2^32 things I never have to unsee Oct 13 05:33:09 sorry, 2^128 - 2^32 Oct 13 06:25:34 Hi i am using beaglebone and i am trying to debug in gentoo host mechine which is 64 bit but i can't access PC keypad in debug Oct 13 06:27:26 Hi... I am using beaglebone and i am trying to debug in gentoo host mechine which is 64 bit. But it could,t access PC keypad at a time of debugging how to solve this issuess.. Oct 13 06:27:38 ans pls.. Oct 13 06:36:08 hit ''numlock" Oct 13 06:36:37 http://www2.expta.com/uploaded_images/numlock-702731.jpg Oct 13 06:37:02 wait, is it running at 64 or 32 bit os? Oct 13 06:37:44 have you tried turning your ans pls off and back on? Oct 13 06:38:28 I'm really not familiar with the ans pls to be honest Oct 13 06:56:37 the suspense is killing me, I'm sure I'm not alone here Oct 13 07:15:02 <_av500_> pls ans Oct 13 07:15:14 you have one too? Oct 13 07:17:30 <_av500_> u chat bad Oct 13 07:20:29 Is this yahoo answers? Oct 13 07:20:42 <_av500_> u give ans pls Oct 13 07:21:38 please is a word that loses it's meaning if you can't be bothered with 3 extra letters Oct 13 07:21:41 <_av500_> this chat give no help y? Oct 13 07:21:48 y u no help? Oct 13 07:22:36 http://www.mememaker.net/static/images/templates/181615.jpg Oct 13 07:23:29 <_av500_> u hav chat but no steps Oct 13 07:24:10 my official support cost is now a jelly bean tablet Oct 13 07:24:29 101 xs will do Oct 13 07:29:12 ans pls Oct 13 07:30:00 <_av500_> support is with baegel free! Oct 13 07:30:14 wait, a free bagel wilth support? Oct 13 07:30:49 <_av500_> u must give steps Oct 13 07:31:08 <_av500_> i must make dsp Oct 13 07:31:11 a) buy bagel, b) buy box, c) ship to russ Oct 13 07:31:17 <_av500_> pls how" Oct 13 07:31:31 sir I wish to prot android pls Oct 13 07:32:07 <_av500_> u must andorid on sd Oct 13 07:32:40 let's be more professional Oct 13 07:33:04 *sigh*, fine Oct 13 07:33:17 meh Oct 13 07:34:06 wow, I was looking for some material, this site must totally be a joke http://www.askmefast.com/Hello_maam_or_sir_Can_U_pls_give_me_detailed_instructions_on_how_to_activate_the_MMSGPRS_settings_of_my_local_MyPhone_QP29_DUO_cp_Im_using_globe_-qna3728887.html Oct 13 07:34:14 I saw the chick pop up and just about lost it Oct 13 07:35:40 oh dear. Oct 13 07:37:26 http://www.freelancer.sg/job-search/android-pls-sir/ Oct 13 07:45:47 <_av500_> bbl Oct 13 07:46:11 have fun Oct 13 08:52:39 * mranostay thinks _av500_ for sleeping is quiter Oct 13 08:52:44 *a Oct 13 08:53:21 drinking prevents entering articles into sentences............ Oct 13 10:03:35 So I though I had USB working by enabling PM_RUNTIME in the kernel, but it turns out that precisely once every minute my USB mouse disconnects and then reconnects. Oct 13 10:12:07 heh Oct 13 10:43:35 kroon: at least you have a nice time reference Oct 13 10:51:05 * mru tells rmk he's wrong again Oct 13 10:52:24 *g* Oct 13 10:53:41 mru is on a trolling trip? Oct 13 11:01:03 mru, heh Oct 13 11:02:22 I wouldn't rely on having my wake-up alarms connected to it Oct 13 11:02:44 but it would be the perfect excuse Oct 13 11:04:09 true :-) Oct 13 11:10:13 sorry I'm late, my usb host controller started working Oct 13 11:11:59 that should at least sound confusing enough Oct 13 12:37:49 why is bone101.service listed as "loaded failed failed" under systemctl list-utils. I tried disable, enable, restart without help Oct 13 14:56:46 hello Oct 13 14:57:02 Do some of you use QNX on BeagleBone? Oct 13 14:58:49 ? Oct 13 14:59:25 ? Oct 13 15:42:20 anybody try building the angstrom graphics driver lately? Oct 13 15:43:08 what graphics driver? dss2? Oct 13 15:43:23 libgles2-omap3 Oct 13 15:43:52 you can't build it... it's a binary only Oct 13 15:44:14 oh Oct 13 15:44:28 hah Oct 13 15:45:09 just use opkg to install it Oct 13 15:45:17 well, i ran and installed the sdk binary Oct 13 15:45:35 is that what i'm supposed to build qt against? Oct 13 15:46:14 dunno I've never used qt Oct 13 15:46:19 ah Oct 13 15:47:42 is there a reason you don't just use opkg for qt as well? Oct 13 15:47:46 i found an old walk through though Oct 13 15:47:59 i need to be able to build Qt with opengl support Oct 13 15:48:21 ah, I thought ithad it already Oct 13 15:48:28 what do you mean? Oct 13 15:48:36 but I could definitely be mistaken Oct 13 15:48:55 the old walk through says i'm supposed to bitbake the driver Oct 13 15:49:19 http://swik.net/Trolltech/Trolltech+Labs+Blogs/Building+Qt+to+make+use+of+the+Beagle+board%E2%80%99s+SGX+GPU/da13l Oct 13 15:50:46 when i try to bitbake the packages, though, i get an error Oct 13 15:51:13 ERROR: Function failed: omap3-sgx-modules: LIC_FILES_CHKSUM points to an invalid file: /angstrom/setup-scripts/build/tmp-angstrom_v2012_05-eglibc/work/beaglebone-angstrom-linux-gnueabi/omap3-sgx-modules-4.05.00.03-r14b/Graphics_SDK_4_05_00_03/GFX_Linux_KM/COPYING Oct 13 15:52:01 it did successfully download the binary sdk though, the fetch worked Oct 13 15:52:26 is that where you put the binary download? Oct 13 15:53:24 do you mean: is that where I'm supposed to put it? Oct 13 15:54:03 i'm just bitbaking and looking at the results Oct 13 15:54:46 i noticed it downloaded a bin file that was labelled as an SDK, so i ran it, and it installed itself in my home directory Oct 13 15:55:25 i was hoping i could just build Qt against the files in my home folder, but that's not working either Oct 13 15:56:06 i don't know what files Qt is looking for exactly, the error message is vague Oct 13 15:56:08 you have to put the binary in the right place to bitbake the support files for it Oct 13 15:56:29 why wouldn't bitbake just download it to the right place? Oct 13 15:57:01 you downloaded it manually, separate from bitbake, right? Oct 13 15:57:10 no Oct 13 15:57:14 bitbake downloaded it Oct 13 15:57:18 ah Oct 13 15:57:54 it's downloading a file all by itself, and then complaining that it doesn't have the right contents Oct 13 15:58:02 i think Oct 13 15:59:39 after installing the SDK, it doesn't seem to contain a file named COPYING Oct 13 16:00:07 have you tried the qt4-embedded-gles package? Oct 13 16:00:43 no, should i just try bitbaking qt instead of building it myself? Oct 13 16:01:08 use opkg if you don't need anything custom Oct 13 16:01:23 bitbake when you need to customize stuff Oct 13 16:01:44 i'm cross compiling, so i need the libs and includes to build against Oct 13 16:02:06 ah, that's valid Oct 13 16:02:42 Trolltech's suggested workflow is cross compiling Oct 13 16:02:52 the people who make Qt Oct 13 16:04:09 i have a feeling though, that i'm going to have to get the driver building somehow, even if i build Qt through bitbake Oct 13 16:04:48 yeah I built stuff on board at one point.. took more than 10 times as long Oct 13 16:06:31 hmm, I have version 4_03_00_02 (my tree is fairly long in the tooth) Oct 13 16:06:50 but it built Oct 13 16:06:55 at one point, then Oct 13 16:07:18 i'm guessing Ti changed their license at some point, and broke the build Oct 13 16:07:37 they did, but made it more open Oct 13 16:07:44 i just don't know how to fix a license mismatch in bitbake Oct 13 16:08:31 can you pastebin your steps? Oct 13 16:08:59 ./oebb bitbake libgles-omap3 Oct 13 16:09:03 that's it Oct 13 16:09:15 lol Oct 13 16:10:52 which repo did you start from... setup-scripts or the older angstrom-setup-scripts? Oct 13 16:11:47 i think it was setup-scripts Oct 13 16:12:00 that's the name of the directory it's in Oct 13 16:12:09 it wasn't that long ago Oct 13 16:12:18 like maybe a month or two ago Oct 13 16:12:20 probably that one then Oct 13 16:12:45 i mean, the problem is obvious Oct 13 16:12:53 i just don't know enough about it to fix it Oct 13 16:13:45 if qt4-embedded-gles builds, then i will just use that, and opkg the driver Oct 13 16:32:15 Hi everybody, I just bought a 2nd-hand BB-xM Rev-B Oct 13 16:32:45 I installed Angstrom but nothing appears in the DVI-screen Oct 13 16:33:41 Something wrong with my BB? Oct 13 16:33:57 Thank you so much. Oct 13 16:34:22 did you set up the card proior to installing angstrom? Oct 13 16:34:31 prior even Oct 13 16:34:37 yes, sure Oct 13 16:34:50 Cuong, check bootcode params for video Oct 13 16:34:59 in the terminal, via UBUNTU host, I saw the Logo Angstrom Oct 13 16:35:19 and I can log in as root Oct 13 16:36:01 tema, could you show me more details? Im a very new with linux Oct 13 16:36:45 'k pastebin your bootargs from using dmesg | head -n 40 Oct 13 16:37:01 hopefully 40 lines is enough to get to the bootargs Oct 13 16:37:20 yes, please wait. Oct 13 16:39:11 pastebin being www.pastebin.org or other site of your choice Oct 13 16:49:39 thurbad: please wait me for a second, my BB cannot power up Oct 13 17:08:24 bleh Oct 13 17:08:34 mac = timing out on the webs Oct 13 19:02:13 hi, all Oct 13 19:02:45 y'a quelqu'un ? Oct 13 19:05:28 thurbad: so no, i can't build projects with the qt4-embedded angstrom package Oct 13 19:05:55 qt-creator won't identify it as a valid qt install Oct 13 19:07:08 back to square 1 Oct 13 19:08:44 anybody know how to fix: ERROR: Function failed: omap3-sgx-modules: LIC_FILES_CHKSUM points to an invalid file Oct 13 20:04:10 Hey, I need some assistance getting my new Wifi Adapter to work. I had one that used a Realtek 8188 chipset. I got it working and ordered 10 more for my lab. The ones they shipped have a Railink 5370 chipset. I cannot figure out how to get a working driver. Oct 13 20:15:10 This is an identical problem to mine, but unforutnately I don't know how to use BitBake or cross compile. Oct 13 20:15:11 http://groups.google.com/group/beagleboard/browse_thread/thread/38bc72ddf999426d%29 Oct 14 00:18:50 Hey everyone, I'm trying to export gpmc_ad3, so I'm using 'echo 35 > /sys/class/gpio/export' and it reports 'write error: Device or resource busy' Oct 14 00:20:06 I've already set the muxing to mode 7 for GPIO, and if I try to export other pins it works successfully. Unexporting 35 also does not work either, it reports 'write error: Invalid argument' Oct 14 00:20:25 What am I doing wrong? This is the only pin I can not get working right now. Oct 14 00:21:09 is something else using it? Oct 14 00:21:49 No, this is my first time using the beaglebone Oct 14 00:21:53 I haven't setup anything else. Oct 14 00:22:18 some driver could have claimed it Oct 14 00:22:37 Is there some way I can check? **** ENDING LOGGING AT Sun Oct 14 03:00:02 2012