**** BEGIN LOGGING AT Sun Sep 15 02:59:59 2013 Sep 15 03:09:22 What is the proper way of getting a Beaglebone black up to date? Flash eMMC image 6-20-2013 -> opkg update -> opkg upgrade? Or is opkg upgrade flawed? Sep 15 03:10:36 opkg upgrade first gives me bad address problems -> fixed that with /etc/hosts hack -> then it hangs, then on hard reboot, opkg upgrade fails with Job for bonescript.socket failed. Sep 15 03:11:10 Any thoughts, or should I just flash the 6-20-2013 version and not opkg upgrade? Sep 15 05:36:00 [kernel] timtianyang opened pull request #59: 3.8 LCD4 pin mapping (master...3.8) http://git.io/0uSB3g Sep 15 08:00:16 moin Sep 15 08:34:27 I case mouha shows up: he needs to install 32bit libs for the evil TI extractor to work, with 64bit only it will silently fail, hence the missing file Sep 15 08:34:30 s Sep 15 08:35:59 <_av500_> koen: arent you supposed to be offline? Sep 15 08:36:13 <_av500_> and congrats again Sep 15 08:38:40 hello Sep 15 08:38:58 I'm having an issue with the DVI/Audio cape not being started at all in 3.8.13 kernel Sep 15 08:39:20 the actual thing I want to do is the usb sniffing - via g_proxy gadget Sep 15 08:39:41 ah, forgot to mention; beaglebone a6 Sep 15 08:41:13 _av500_: thanks! Sep 15 08:41:22 _av500_: offline starts at the airport tomorrow Sep 15 08:41:30 I've built Angstrom yesterday, now I want to know how to patch that kernel with g_proxy Sep 15 08:41:39 yes, I can port g_proxy to 3.8.13 Sep 15 08:48:41 I'll try building the kernel manually (a'la build-kernel.sh) Sep 15 08:49:58 AStorm: go to the angstrom website and search for the "kernel workflow" entry Sep 15 08:50:16 and follow the instructions behind the "developers" tab on top Sep 15 08:50:26 trying again - the problem is that 3.8.13 in new angstrom doesn't work with dvi/audio cape Sep 15 08:50:42 I had that problem previously too with Sabayon - and I'll need the cape later Sep 15 09:56:43 d'oh, the cape wasn't autodetected Sep 15 10:08:38 somehow, the dts files were incorrectly named Sep 15 10:08:42 that was it Sep 15 10:24:24 hey Sep 15 10:24:39 does anyone here have the beaglebone dvi+audio cape asound.state? Sep 15 10:24:47 I get sound but it's terribly distorted Sep 15 10:24:51 probably wrong mixer settings Sep 15 10:27:21 koen: GTFO and stay offline! *congrats* Sep 15 10:28:58 ahha Sep 15 10:29:04 fixed it Sep 15 10:29:38 this mixer is real weird Sep 15 10:31:33 also anything on DAC > 50 clips badly Sep 15 10:47:22 hmm, now I can go to 100 Sep 15 10:47:39 it's a bit weird setup there, I could use some help with it Sep 15 10:49:27 ok, it's broken still, 50% of the time I get nasty static, otherwise I get clean sound Sep 15 10:49:32 how do I fix this? Sep 15 11:52:33 USPS is such a bastard. They gave me a note saying that my package was intercepted instead of being delivered and asked me to talk to my postmaster. My new beaglebone black is being locked up by the government. Sep 15 11:52:38 What kind of threat can it be? Sep 15 11:53:14 <_av500_> country? Sep 15 11:53:16 USA Sep 15 11:53:22 California, Bay Area Sep 15 11:53:25 <_av500_> oh Sep 15 11:53:55 I got a yellow and a pink slip which are recipts that they have my stuff with no explaining. Sep 15 11:55:01 <_av500_> fun Sep 15 11:55:56 fzombie: did you get it from a normal reseller? rs / farnell / whatever? Sep 15 11:55:59 A lot of my other mail is also opened when I get it. Unless it comes from an insurance company or legal sounding office Sep 15 11:56:21 I got it from a college that had extra from a project. Sep 15 11:56:26 o.O Sep 15 11:56:39 fzombie: oh, in the US? Sep 15 11:56:43 USA Sep 15 11:56:52 it didn't cross national borders? Sep 15 11:57:01 From Florida to California Sep 15 11:57:05 wow Sep 15 11:57:13 that is fucked up Sep 15 11:57:24 It was used once in a astronomy lab Sep 15 11:57:40 i'm sorry you live in a fascist dictatorship Sep 15 11:58:02 We have a pretty bad country right now. I wish people would wake up and take control. Sep 15 11:58:14 Trust mass media, and turn off brain = disaster no matter where. Sep 15 11:58:56 do you have any idea why the man is after you? Sep 15 11:59:09 Because I'm an honest citizen? Sep 15 11:59:45 I've had security clerances and background checks. Emergency first responder with a good record. No arrests or tickets. No drugs. Sep 15 12:00:03 but do _they_ know that? Sep 15 12:00:19 If they checked their computer maybe. Sep 15 12:00:53 having a security clearance means the government knows everything about you Sep 15 12:00:58 I've got photo ID in many states and federal databases. Sep 15 12:01:07 it also means they mostly own you Sep 15 12:01:21 Not exactly, depends on the clearance. Sep 15 12:01:25 what a weird country you have Sep 15 12:01:27 so that could be part of the reason Sep 15 12:01:28 and mine is expired Sep 15 12:01:51 * KotH has also a security clearance, but his gov doesnt own him Sep 15 12:02:39 our hobbit is back! Sep 15 12:02:49 I was a supervisor of port security, also had a general and federal clearance on another job where I was in charge of a high value target, They know I'm not a threat. Sep 15 12:03:06 general = "private company" btw Sep 15 12:03:20 they just hire out govt resources to run the check Sep 15 12:05:21 I got this idiot on the phone saying "First-Class parcels are protected, but Other classes of mail do not contain private correspondence and therefore may be opened without a warrant. He said the main issue I can bring up is that it's being delivered late. Sep 15 12:05:38 rotfl Sep 15 12:05:59 and there is no information why my stuff was opened and heald Sep 15 12:08:00 such behaviour would be highly illegal in any democratic country Sep 15 12:08:12 My safe project will have to wait. I got a nice safe that's bolted to the concrete in my house. It's got protected ports in the back so I can add Power, LAN, and a USB port. Sep 15 12:08:25 I was going to use it to back up all my data. A nice hard drive stack in a fireproof safe. Sep 15 12:08:55 KotH, nah democratic means "majority rule" meaning that a lot of people are not represented. Sep 15 12:09:04 abuse is bound to happen Sep 15 12:09:10 yeah right Sep 15 12:09:20 now a "democratic republic" has a constitution that protects minority. Sep 15 12:09:31 however the USA has gorwn fond of ignoring that part. Sep 15 12:09:45 fzombie: i live in one of the most democratic countries of the world, and i can tell you that abuse of "majority"'s power is the least of our concerns Sep 15 14:26:27 Hi, Sep 15 14:27:24 hi Sep 15 14:27:36 anyone there? Sep 15 14:28:31 heello Sep 15 15:07:17 anyone here? Sep 15 15:07:59 lot's here... few ever reply to "anyone here" type messsages Sep 15 15:08:02 http://shrani.si/f/2j/Va/EWYMU44/pinmode.png Sep 15 15:08:12 can someone tell me why is this not going to pull-up Sep 15 15:26:29 I'm having trouble connecting to my beaglebone. I'm using a fresh image, and am using external power. The boot log on serial is very garbled, but I included it anyway. In this pastie is the tail of dmesg on my host machine, lsusb, and the boot log of the beagle. Help is appreciated, I've been trying to figure out what's wrong for a day now. http://pastiebin.com/5235d0c29ced4 Sep 15 15:27:22 one more thing to note, is that I'm trying to boot off of an sdcard Sep 15 15:27:27 korenje: are you putting it into mode 7? I thought that was safemode/disabled Sep 15 15:32:38 Anyone who can help me with 1 wire and dallas ds18b20. My problem is that would like to use more than one bus (pin). I have wired two separate areas each bus with 6 sensors in my house. I have connected area A with pin 22 and area B with pin 26. I'm able to read each separately having two different .dts overlays but not at the same time. If I load both overlays I only see the sensors in the area I loaded first. Im only seeing one Sep 15 15:35:51 thurgood, I can't put it to mode 7 it seems... Sep 15 15:42:10 korenje, I'd have to look at the srm but mode 7 has historically safemode, not a GPIO mode Sep 15 15:43:21 well... I can't put it in any more... from 0-7 Sep 15 15:44:53 also arent modes in this sequence: cd_data3,gpmc_a3,pr1_mii0_txd2,ehrpwm0_synco,NA,pr1_pru1_pru_r30_3,pr1_pru1_pru_r31_3,gpio2_9 Sep 15 15:46:23 has anyone here built an sdcard with debian for the classic beagleboard c4 lately from the netinstall script? Sep 15 16:07:50 DOn't know why I didn't try it earlier, but I switch the usb ports for both the usb connection and serial debug connection, and things are looking better now. It enumerates and serial isn't garbled Sep 15 16:09:38 yeah the wonders of usb Sep 15 17:02:31 I am writting c program calling Justin Cooper's BBIO Library. But when I try to set up EHRPWM0 pins on Beaglebone Black which correspond to P9_41 & P9_29. These two pins could not been set up directly from writing to /sys/devices/ocp.2. Do I have to use device tree overlay method to set up? Thank you. Sep 15 17:04:08 heh Sep 15 17:05:35 hi Sep 15 17:05:55 newbie here Sep 15 17:06:07 yes, you need to use Device Tree Sep 15 17:06:18 and create an overlay *or* find one that does what you want. Sep 15 17:07:39 Can anyone help me with creating multiple 1-Wire buses for Dallas DS18B20? Sep 15 17:10:51 I c thanks Sep 15 17:11:01 Does that mean for all mux set up Sep 15 17:11:19 has to be done through device tree overlay? Sep 15 17:13:27 sillyknight google is not your friend? Sep 15 17:14:32 woglinde sorry, i will do that Sep 15 17:27:12 can anyone assist me with 1-wire and multiple buses? Sep 15 17:29:41 StefanBjornsson: what Sep 15 17:29:54 have you read the maxim app-note about making reliable 1-wire busses? Sep 15 17:31:29 speedevil yes. Sep 15 17:31:47 What's your problem? Sep 15 17:32:42 ok can someone tell me how do I mux pins when using kernel 3.8 ? Sep 15 17:33:31 I'm just not able to have two have two buses running at the same time. Im doing something wrong in my .dts device tree files. I can read both of the buses individualy. When I load both of them I only see the devices connected to the bus i loaded first. Sep 15 17:34:05 korenje, use Device Tree Sep 15 17:34:16 how? Sep 15 17:34:22 is it possible to do that in shell? Sep 15 17:34:54 its not a shell thing Sep 15 17:36:13 SpeedEvil I have 6 DS18B20 connected to each bus. Sep 15 17:36:33 how do I do that in python? Sep 15 17:37:05 StefanBjornsson: the answer to the question you're not asking is that you can add a bus switch to connect multiple busses together Sep 15 17:37:49 korenje, its not a python thing Sep 15 17:37:55 its a Device Tree Thing... Sep 15 17:38:20 so how do I do it? Sep 15 17:39:00 SpeedEvil Is that the only way? I had seen the bus swith but what i wanted to was to have one bus on P9.22 and another on P9.26 and just read from both of them at the same time. This is actually the document i read: Guidelines for Reliable Long Line 1-Wire Networks - Tutorial - Maxim Sep 15 17:39:09 StefanBjornsson: no - that's probably sane Sep 15 17:39:19 StefanBjornsson: i have no idea to answer the question as asked Sep 15 17:39:23 ^how Sep 15 17:40:01 korenje, google for beaglebone black device tree Sep 15 17:42:00 ok SpeedEvil..Thank you for taking the time. I found a document descibing how to do this on an Arduino. and I have found in the forum something about 1w-gpio-custom.h to have 4 buses. But still I haven't been able to get this working on my BBB. Sep 15 17:42:31 it should in principle be possible to run multiple busses Sep 15 17:42:40 It's not as if there is a hardware unit that's doing it Sep 15 17:46:01 Excactly.. There must be a way to create one .dts that can read from multiple pins.. I've tried that but it only loads the bus that I state first in the .dts. I have also tried to create two .dts one for pin P9.22 and another for P9.26 and the same story.. Im only seeing the bus that I load up first. Sep 15 17:48:04 korenje at boottime Sep 15 17:48:32 you change pin mode? Sep 15 17:49:29 korenje google beagle board pinmux devicetree overlay Sep 15 17:49:31 StefanBjornsson, you are setting them as GPIO or something else? Sep 15 17:50:03 GPIO Sep 15 17:51:13 and you are using P9.41 as well? Sep 15 17:53:55 P9.41 has special issues Sep 15 17:54:29 (as it is also connected to another pin internally) Sep 15 17:54:30 never mind Sep 15 17:54:30 I misread that Sep 15 17:54:45 Currently this is the only thing connected to the device. They work individually but not at the same time. I load bus 1 and can read from it. Then I have to unload it and load the bus 2. If I load both busses I only see the bus I load first. Sep 15 17:56:06 Thank for the help. I now have to run. I'll check in later tonight. Sep 15 17:59:45 hi florian Sep 15 18:00:11 florian can you check whats wrong with planert.linuxtogo.org? Sep 15 18:03:24 woglinde: will try Sep 15 18:03:44 woglinde: hi, btw. :-) Sep 15 18:06:19 hey Sep 15 18:06:42 I'm facing an issue with the dvi+audio cape - audio seems to have some bit offset issue Sep 15 18:06:51 so sometimes it plays fine, but sometimes there's huge noise instead Sep 15 18:07:03 any ideas why? it worked with 3.2.x Sep 15 18:08:06 in the meantime, I've "ported" g_proxy to this version; the port is kinda a hack, but still Sep 15 18:08:19 it could use more work, but I don't have the time to spare Sep 15 18:11:22 so folks, any help with this noisy audio? Sep 15 18:11:45 (I needed the g_proxy to sniff USB init of Lynx HiLo, to make ALSA UAC2 driver work with it) Sep 15 18:16:18 the TI kernel tree has some new patches apparently Sep 15 18:20:05 nah, wait, it doesn't Sep 15 18:20:14 so, does anyone know how to fix that SoC? Sep 15 18:21:03 AStorm ask tomorrow Sep 15 18:21:09 today is weekend and quiet Sep 15 18:21:11 ok, I will Sep 15 18:21:19 in the meantime, testing that g_proxy Sep 15 18:21:24 hopefully it works Sep 15 18:25:25 What is the current verdict on opkg upgrade? Just don't do it? Sep 15 18:26:26 opkg upgrade worked here Sep 15 18:26:34 it just takes a very long time Sep 15 18:26:54 I've updated from the new angstrom release though Sep 15 18:28:28 opkg upgrade fails from the "latest" release (6-20-2013) from Beaglebone page. Sep 15 18:28:44 This may be stupid but does anyone know the difference between a beagle board and a beagle bone? Sep 15 18:28:45 AStorm: which image did you use? Sep 15 18:29:03 Wendi: about $100 Sep 15 18:29:16 :) Sep 15 18:29:18 I mean programming wise Sep 15 18:29:25 lol Sep 15 18:30:02 hey guys, I was wondering if anyone knows of a way to create a 'master' image from a current beaglebone black Angstrom emmc to a micro sd in order to easily clone it to other beaglebone blacks? Sep 15 18:39:04 ptan: september one, latest, yesterday. Sep 15 18:39:26 I think that was 20130903 or such Sep 15 18:47:11 how can I know what pins is what on bbb in /sys/kernel/debug/pinctrl/44e10800.pinmux Sep 15 18:47:42 read the dst files? Sep 15 18:47:48 (in /lib/firmware) Sep 15 18:48:11 *dts files Sep 15 18:51:08 http://gitorious.org/am335x/linux-am33x/commits/4d58e1f517868efab1dc6a2b5c9f52b8da0f62b8 <- one of these might have the fix for the ASoC Sep 15 21:31:41 nvm, all these patches are applied - I suspect the patch that does the PLL switching is broken Sep 15 21:31:51 that's the only major change in the driver since 3.2 Sep 15 21:38:26 never mind, the mailing list answered. d'oh! Sep 15 22:17:52 nah, that didn't work, I'm not using beaglebone black. heh. Sep 15 22:24:35 Ka6sox you still here? Sep 15 22:33:37 Anyone who knows how to create multiple 1wire busses on BBB that can be polled at the same time? I have two busses one on pin P9.22 and another on P9.26. Both work seperately but not at the same time. Each bus has 6 Dallas DS18B20 sensors. Sep 15 23:27:52 Does anyone know how to create multiple 1wire busses on BBB that can be polled at the same time? I have two busses, one on pin P9.22 and another on P9.26. Both work seperately but not at the same time. Each bus has 6 Dallas DS18B20 sensors. Sep 15 23:29:20 StefanBjornsson, tomorrow might yield better results...or patience too... Sep 15 23:30:12 Ka6sox: I understand.. I'll be here tomorrow after work. Sep 15 23:59:51 StefanBjornsson, what TZ are you in? Sep 15 23:59:58 GMT -1 or -2? Sep 16 01:46:04 Just wanted to let you know that I managed to create a .dts file that will load up two bus_masters for 1 wire using w1-gpio on BBB. I'm a happy camper. Sep 16 01:47:23 I now have two busses one on P9.22 and another on P9.26 Sep 16 01:49:22 :-) Sep 16 02:25:38 Hey guys, I'm running yocto dylan + meta-ti dylan to build a kernel for my beaglebone Sep 16 02:25:52 and it doesn't seem to be building the devicetree files and placing them in deploy, am I missing something? Sep 16 02:27:14 meta-ti/recipes-kernel/linux/linux-dtb.inc suggest that it should be doing this Sep 16 02:35:04 Looks like meta/recipes-kernel/linux/linux-dtb.inc is running instead and it's out of date for 3.8+ kernels Sep 16 02:36:47 Am I supposed to put meta-ti ahead of meta in bblayers.conf to have it prefere the meta-ti linux-dtb.inc file? Sep 16 02:38:03 Looks like reording my meta-ti and meta libraries in bblayers.conf fixed it Sep 16 02:38:10 * toobluesc waves and thanks everyone for listening :) Sep 16 02:57:19 * emocakes touches toobluesc Sep 16 02:57:23 *softly* **** ENDING LOGGING AT Mon Sep 16 02:59:58 2013