**** BEGIN LOGGING AT Mon May 12 02:59:59 2014
May 12 04:22:37 <airforceyyb> how to make beagle display besides connect to  a screen with HDMI
May 12 04:23:03 <veremit> rgb is available on the headers airforceyyb
May 12 04:23:42 <veremit> you can convert that to lvds for tft if needed
May 12 04:23:43 <veremit> brb
May 12 04:26:27 <airforceyyb> sorry i don not konw rgb, brb and lvds and i have a 7 inches screen but i don not kown haw to use it
May 12 04:29:38 <thurgood_> brb = be right back
May 12 04:30:00 <thurgood_> rgb = red, green, blue (signals)
May 12 04:31:12 <thurgood_> lvds is a display format... not sure shat the letters stand for exactly
May 12 04:31:56 <thurgood_> or rather a display interface format
May 12 04:32:45 <thurgood_> do you know what interface your screen uses?
May 12 04:38:07 <airforceyyb> you mean i need to load some drivers about my screen then i can use ti
May 12 04:38:10 <airforceyyb> it
May 12 04:45:11 <thurgood_> airforceyyb:  no, not necessarily depends on what input you screen actually uses
May 12 04:48:49 <veremit> back
May 12 04:48:54 <veremit> can you link your screen?
May 12 04:49:03 <veremit> ie. what it is .. to the room?
May 12 05:20:47 <veremit> ok i@ll bbl .. gotta get ready for work
May 12 05:31:49 <mipoem> Hello,everybody! I am using a beagleboard xM, I have read the sch found that the pins of SDRCs and GPMCs are leaving without connecting, GPMCs have no connect because this is no nandflash, SDRCs have no connect because the RAM useing PoP packaging, so I want to know that if I can use the SDRCs or GMPCs to connect to orther device, such as FPGA?
May 12 05:33:48 <spce> HI
May 12 05:34:23 <spce> just flashed my board and am having trouble connecting
May 12 06:11:05 <sachin_> I have installed angstrom on BBB, booted device from eMMC it works good. Then I flashed external sd card with Angstrom OS on it. Then I have inserted sd card in BBB. It works good. but then onwords booting from eMMC stops.
May 12 06:11:15 <sachin_> Any clue,
May 12 06:11:30 <sachin_> now I need to flash eMMC to boot from it.
May 12 06:26:27 <Bablu> Can anyone say which OS is best suitable for driver development for beagleboneblack.?
May 12 06:35:58 <Dan3> Bablu: probably debian because thats whats officially supported now
May 12 06:36:53 <Bablu> K Dan3 very thanks for the info
May 12 06:37:07 <Bablu> can u also suggest which toolchain can be used for compiling them
May 12 07:00:15 <sachin_> @Bablu, My exp with debian is not good, I was strugling to driver development setup. no right pages which does your compilation sucessful. Then I moved to angstrom and Its Good. I was able to compile uImage and update on device.
May 12 07:05:48 <KotH> sachin_: what output do you get on the serial console when it stops?
May 12 07:07:48 <sachin_> Sorry, I dont have console. I normally do ssh to board using ethernet cable.
May 12 07:08:06 <sachin_> And I dont see any single LED turned on when trying to boot from eMMC.
May 12 07:08:22 <sachin_> But when I insert sd card it works good.
May 12 07:09:33 <sachin_> This I have seen 2 times, Now If I flash eMMC and then boot, it will work until I try to boot from sd card once.
May 12 07:10:48 <KotH> sachin_: well, then your first job is to get a serial cable and see what you get there
May 12 07:11:01 <KotH> anything else is like flying blind
May 12 07:11:18 <KotH> yes, you might get your plane where you want it to be, but chances are high that you crash into the next mountain
May 12 07:12:33 <sachin_> Ok Understood, Thanks.  I will try to get serial cable but any guess. Ideally booting from anywhere should possible. It should be dependent any guess what I might be missing. like any key sequence.
May 12 07:12:55 <sachin_> sorry It should not be dependant.
May 12 07:13:58 <KotH> most likely wrong boot device set or driver missing
May 12 07:15:45 <mjasim> hi
May 12 07:16:28 <mjasim> do you know how to make a password on clode9?
May 12 07:17:20 <mjasim> florian
May 12 07:17:24 <mjasim> how are you
May 12 07:18:00 <florian> hi all
May 12 07:18:06 <sachin_> OK. Fine. In case of serial cable. Regular USB to Serial will work. Like BAFO USB TO SERIAL DB9 ADAPTER CONVERTER ?
May 12 07:18:38 <mjasim> hi
May 12 07:18:53 <mjasim> florian
May 12 07:18:57 <mjasim> how are you
May 12 07:22:39 <alex______> hi
May 12 07:25:05 <alex______> do any body know if posable to make password for cloud9 in beaglebone black
May 12 07:25:07 <alex______> ?
May 12 07:27:00 <alex______> hi
May 12 07:38:50 <KotH> alex______: selam
May 12 07:39:17 <KotH> alex______: i dont know what exactly you are asking for, but it's software, so it can be done
May 12 07:42:26 <Mohammed_elsamma> hi
May 12 07:42:58 <Mohammed_elsamma> im asking if possible to make a password for beaglebone black?
May 12 07:43:27 <av500> yes
May 12 07:43:33 <av500> its a linux computer
May 12 07:43:48 <Mohammed_elsamma> i use sudo passwd
May 12 07:44:35 <Mohammed_elsamma> but when i open the web broswer and Enter the ip for beaglebone it open the page without password
May 12 07:44:44 <Mohammed_elsamma> ?
May 12 07:44:49 <av500> different thing
May 12 07:45:05 <av500> you need to change the browser setup to use a password
May 12 07:45:22 <Mohammed_elsamma> may you give me a hint
May 12 07:45:26 <av500> http://en.wikipedia.org/wiki/Htaccess
May 12 07:45:47 <av500> https://www.google.com/search?q=add+password+to+webpage
May 12 07:46:10 <Mohammed_elsamma> thanks i will check this links
May 12 07:57:53 <The_Ball> Does anyone know the exact voltage trigger levels for input GPIO signals?
May 12 08:54:38 <mrpackethead> how is .ch chocolate troll KotH
May 12 09:00:10 <KotH> it's monday
May 12 11:23:06 <rob_w> i read that the BBB now is getting a REV C which increases the emmc to 4GB , is there any patch to u-boot needed for taht ?
May 12 11:26:50 <philenotfound> rob_w: don't think so
May 12 12:29:26 <javier_> Hi, i have some weird behavior on gst-launch-1.0 on a BeagleBone black + uvcvideo camera... If i omit the video caps it negotiates it as raw video yuy2 1600/1400 but the image is green. If i specify my own caps i can only make it work with yuy2 w=320 h=240 but i have a proper image
May 12 12:29:41 <javier_> f i specify other width/height it gives me an internal data flow error and not negotiated -4
May 12 12:29:55 <javier_> any thoughts?
May 12 12:44:10 <KotH> javier_: green is an all-zeros picture, ie you dont get any data
May 12 12:44:21 <KotH> javier_: i would guess that's a driver problem
May 12 12:44:27 <KotH> javier_: does it work on your pc?
May 12 13:47:48 <Elgaeb> Hello can someone tell me why my sd card has not the full space if im using win32image around 200mb is not used
May 12 13:49:51 <KotH> because you write down an image with a fix partition table
May 12 13:50:32 <KotH> if you use a 512GB sd card, the 508GB in the back will not be used
May 12 13:50:36 <KotH> unless you repartition
May 12 13:50:56 <javier_> Hi kotH yea the same camera and gstream pipe works ok on an Ubuntu x86 14.02
May 12 13:51:44 <KotH> javier_: compare kernel versions
May 12 13:51:55 <KotH> javier_: maybe the kernel you have on your bbb is too old
May 12 13:51:58 <KotH> or something
May 12 13:52:15 <KotH> also check whether you have anything in the logs
May 12 13:52:24 <javier_> 3.8.13-bone30
May 12 13:52:37 <javier_> and nothing special at dmesg
May 12 13:53:41 <Elgaeb> how i can rebuild the partition table to use the full space?
May 12 13:54:37 <javier_> elgaeb mmm i did it not so long ago let me check my browser log
May 12 13:54:58 <javier_> http://elinux.org/Beagleboard:Expanding_File_System_Partition_On_A_microSD
May 12 13:55:03 <Peanut> Elgaeb: http://elinux.org/Beagleboard:Expanding_File_System_Partition_On_A_microSD
May 12 13:55:04 <javier_> here you go!
May 12 13:55:13 <Peanut> javier_: you just beat me to it :-)
May 12 13:55:20 <javier_> hehe
May 12 13:57:50 <javier_> it's odd because the pipe only works ok with w320 h240 and on ubuntu x86 i am able to change the resolution as wanted...
May 12 14:00:47 <Elgaeb> Great works fine! :)
May 12 14:03:09 <Peanut> That was quick, Elgaeb. Nice :-)
May 12 14:08:50 <envee> i want to use beaglebone black for open cv
May 12 14:09:04 <envee> my requirement is to use 2 cameras with beaglebone
May 12 14:09:14 <envee> can i use 2 cameras with this?
May 12 14:10:48 <javier_> envee a usb hub should do it...
May 12 14:11:14 <myself> nope, there's a secret chip on the board installed by a KGB agent to prevent amerikan spies from using the beaglebone for dual-camera spying. Any other linux box in the known universe can handle multiple cameras, but NOT THE BEAGLEBONE. Noooo!
May 12 14:12:18 <javier_> lol
May 12 14:14:22 <KotH> envee: you are the first one ever doing that!
May 12 14:14:31 <javier_> is 3.8.13 kernel cap for beagle board black?
May 12 14:20:07 <KotH> javier_: do not send private messages unless asked to do so
May 12 14:20:11 <KotH> javier_: it's considered rude
May 12 14:20:28 <javier_> ups sorry
May 12 14:20:53 <javier_> nvm then, thanks for the help anyway!
May 12 14:23:16 <KotH> javier_: there are newer kernels
May 12 14:23:33 <KotH> javier_: i'm not sure whether you can use mainline w/o patches, but 99% should work
May 12 14:24:01 <KotH> and there should be somewhere an EVT for the BBB with all patches that follows mainline
May 12 14:25:44 <javier_> thanks, i will look for it then
May 12 15:09:15 <envee> is there anyone who ever used 2 cameras on beagel?
May 12 17:48:25 <nwmcsween> so I'm trying to flash the emcc as I was told it may be broken I held the user boot button down on power up and all that happens is the 4 blink for a sec then the cpu led comes dimmly on
May 12 17:48:50 <nwmcsween> the 'heart-beat' led is going though
May 12 17:49:01 <nwmcsween> but nothing else happens
May 12 18:33:55 <trevize> anyone else having trouble compiling hostapd?
May 12 18:47:20 <mistawright> can anyone help me get this lcd, http://i0.kym-cdn.com/entries/icons/original/000/001/333/jd.jpg, interfaced with the beaglebone black lcdc controller. I know where to put the db0-db-15 pins but the other pins for the lcd I am not aware of. I know that some pins are used for the touch screen and sd card slot
May 12 18:47:56 <mistawright> I have a 40 pin adapter that i plan to use with a pcboard and some pins to make a cape to use the screen with the beaglebone
May 12 19:28:31 <pdp7> woohoo, just bougt a rev C BBB from adafruit with bitcoin! :)
May 12 19:50:15 <mistawright> pdp7, buy me one
May 12 19:53:11 <mistawright> I wonder how long they will stay in stock. i want to buy one now but cant till thursday
May 12 20:39:22 <pdp7> only $21 of bitcoin left for now
May 12 20:43:26 <heeen> hmm lsusb only shows root hubs
May 12 20:43:32 <heeen> on a brand new bbb
May 12 22:01:50 <__butch__> Quick question: what's the setup info for the serial port?  Is it 9600 bps, 8-1-none?
May 12 22:06:25 <vagrantc> __butch__: usually 115200
May 12 22:08:47 <__butch__> I tried that, but it was crap.  :-(
May 12 22:08:51 <__butch__> I'll try again.
May 12 22:08:59 <__butch__> Perhaps my O-scope is just lying to me.  :-)
May 12 22:10:09 <__butch__> And while I'm doing so well on questions, here's another one: How can I change the default port for Cloud9 from 3000 to something else (like 8000)?
May 12 22:10:40 <__butch__> I'm a software guy trying to play a hardware guy — quite embarrassing, really.  :-)
May 12 23:15:12 <Tommy24> Hi - i'm here again with the same problem because xenomai don't work for me... maybe someone has little bit time to explain me how i get it work? - I would be very greatful
May 12 23:16:28 <noobie> question: is it possible to add a second ethernet interface to the board? I'd like to use it as a router/firewall
**** ENDING LOGGING AT Tue May 13 02:59:58 2014