**** BEGIN LOGGING AT Sun Jul 27 03:00:00 2014 Jul 27 07:08:45 hello Jul 27 09:23:12 well I think I've really hosed my BBB Jul 27 09:23:30 I managed to screw up the filesystem on the eMMC, and now it won't boot off of an SD card either Jul 27 09:24:00 I have an FTDI cable and it's not saying the "gpio 55" message it used to say when I'd hold down the button before Jul 27 09:24:36 I guess I got my uEnv.txt pretty broken too :S Jul 27 09:24:40 any leds come on? Jul 27 09:25:03 try a known working SD card Jul 27 09:25:18 but if there is really nothing coming out of the UART, then it's likely dead Jul 27 09:25:36 IIRC ROMBL should spew out a few characters at least Jul 27 09:25:41 jpfau: if you are running Linux on your main PC try this https://github.com/ungureanuvladvictor/BBBlfs Jul 27 09:26:07 the ROM puts a couple of "CCC" on the serial line when it tries to do boot from USB/Serial i think so Jul 27 09:26:09 oh I mean, I can type stuff into the bootloader Jul 27 09:26:23 jpfau: no Jul 27 09:26:32 and the SD card was working beforehand Jul 27 09:26:36 I was replying to tbr Jul 27 09:27:15 by typing stuff into the boot loader you mean you get into U-Boot? Jul 27 09:27:25 yeah Jul 27 09:27:33 I have access to U-Boot's command prompt Jul 27 09:27:50 vvu: this might be useful, let me check one thing first though Jul 27 09:27:57 *might be useful in this case Jul 27 09:28:22 jpfau: ok, if u need help with it or find some bugs please do share or fix em and do a pull request Jul 27 09:29:38 if you get u-boot the board is at least not dead :) Jul 27 09:31:35 ok there we go, I managed to boot onto the SD card Jul 27 09:31:48 now let's see if I can fix my eMMC Jul 27 09:32:06 apparently holding S2 and pressing S1 doesn't work, I have to reapply power Jul 27 09:41:36 ok it's all fixed now apart from my bootloader still being a bit bad Jul 27 09:41:45 I can boot into the eMMC again Jul 27 09:42:13 turns out that Arch symlinks /lib to /usr/lib and I accidentally overwrote the symlink when trying to install some modules I built Jul 27 09:52:35 :) Jul 27 09:58:48 looks like audio doesn't work on the kernel I built :( Jul 27 10:24:40 does audio work on 3.12? Jul 27 10:24:47 it seems to be broken for me Jul 27 10:24:50 HDMI audio that is Jul 27 10:24:55 it worked fine on 3.8 Jul 27 11:30:31 hrm, why can't I x forward my beagle? Jul 27 11:39:53 nate`: there is a multitude of reasons, but my magic crystal ball is out for repair Jul 27 11:40:10 normally this fails for me because I forgot to install xauth Jul 27 11:43:13 xauth was installed already Jul 27 11:43:24 I'm running XQuartz on my mac. Jul 27 11:43:31 So I should just be able to ssh -X to the damn thing Jul 27 11:49:06 -hi Jul 27 11:49:42 lo Jul 27 13:57:47 nate`: my guess is that the sshd doesn't have x forwarding enabled Jul 27 13:57:52 it's off by default these days Jul 27 17:18:19 hey, so I'm having some trouble with my BBB, as of yesterday afternoon I'm getting nothing from the P8 or P9 headers, but buts and runs just fine Jul 27 17:18:30 *boots Jul 27 17:19:02 I should be able to measure voltage from any of the sources on P9 right? or if I enable a GPIO out on P8? Jul 27 17:20:16 any ideas on where to buy rev c in north america other than adafruit? Jul 27 17:32:07 hi. i just got my RevC BBB working with the Netgear N150 wifi dongle I bought, and now I'm getting crazy latency/packet loss and wondering what I can do to fix/tune this Jul 27 17:32:33 i can ping the router, but getting like 10second (10000ms) response times Jul 27 20:53:43 Is there a blog post or article somewhere that explains why the beaglebone black kernel isn't in line with the Linus kernel? Are there any plans to bring it in line? Jul 27 21:05:12 jamisnemo follow the arm linux mailinglist Jul 27 21:06:16 hi **** ENDING LOGGING AT Mon Jul 28 03:00:00 2014