**** BEGIN LOGGING AT Fri Aug 08 02:59:59 2014 Aug 08 06:46:45 edub: imo as long as you dont need linux packages dont use a linux board. You will get all the disadvantes but non of its advantages Aug 08 06:49:48 edub: to check a few sensors, and send results to a display(which one?) a aduino sized board would be sufficient. Aug 08 06:50:28 gu: no, it is rather straight forward Aug 08 06:53:05 gu: if you send me a message in around 6h i can send you a 'one file' python script that should, if you wire your lcd accordingly, work flawlessly Aug 08 08:08:31 Hey guys, I was wondering either anyone here has expirience in remote debbuging for bbb and would have some time to help me out? Aug 08 08:56:54 hey guys, anychance anyone had some time to help me out with remote debbuging problem using bbb? Aug 08 08:57:33 what's the problem? Aug 08 08:57:35 maybe just ask about your problem specifically. probably nobody here will say "yes, i know all about it, and i will hold your hand through the whole process"" Aug 08 08:59:09 well i have described the problem on the forums. https://groups.google.com/forum/embed/?place=forum/beagleboard&showsearch=true&showpopout=true&showtabs=true&hideforumtitle=true&parenturl=http%3A%2F%2Fbeagleboard.org%2FCommunity%2FForums%2F#!searchin/beagleboard/SIGSEGV|sort:date/beagleboard/BDeM9ZZf5l0/x6G-TV8bvBYJ Its about segmentation fault while debbuging. I think i have set everything correctly, but it still doesnt work, im Aug 08 08:59:09 stuck on it for hours now Aug 08 08:59:18 I would really aprichiate any help guys Aug 08 09:03:07 no idea what this "slickedit" thing is doing. i'd suggest getting things to work on the command line first. Aug 08 09:04:35 alright, ill give it a try Aug 08 09:09:42 to be honest im not sure how to connect from command line, im turning on gdb-multiarch and then when in gdb and trying to connect im just getting this answer and gdbserver on the target is being restarted Aug 08 09:09:44 (gdb) target remote 192.168.7.2:12345 testowy Aug 08 09:09:44 Remote debugging using 192.168.7.2:12345 testowy Aug 08 09:09:44 warning: Architecture rejected target-supplied description Aug 08 09:09:44 Remote 'g' packet reply is too long: 000000001ef9ffbe000000000000000000000000000000000000000000000000000000000000000000000000000000000000000020f8ffbe00000000901cfeb630000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 Aug 08 09:09:47 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 Aug 08 09:09:57 testowy is the name of the file Aug 08 09:16:26 what is it with that gdb-multiarch always? isn't there a gdb fitting the toolchain you use? Aug 08 09:16:51 i have installed arm-linuxgnueabihf-g++ Aug 08 09:17:04 but there no arm-linux-gnueabihf-gdb Aug 08 09:19:52 I have seen on a Dereks Molloy video that he was using this gdb-multiarch for remote debbuging Aug 08 09:20:35 well then does it work for the exact same constellation that he used? Aug 08 09:20:47 Greetings! I just installed a debian image on my BBB, and I have a WL18xx cape that I'm trying to get to work. I can though only find instructions on how to make it work with Angstrom. Is there anyone that has any hints on where I can find debian instructions for it? Aug 08 09:20:52 iron out everything that you are doing differently. Aug 08 09:21:34 He was setting it in eclipse. I Think i have set every single setting in the same way but in SlickEdit Aug 08 09:22:00 If I wont find the solution anysoon i will have to install eclipse and check either it works Aug 08 09:22:12 He was using the old regular beaglebone though Aug 08 11:43:34 hi Aug 08 11:46:10 lo Aug 08 11:46:54 silver Aug 08 13:49:28 FRIDAY? Aug 08 14:59:38 hello... I have beaglebone a5c, i had used an arch distrobution and i could set cpu to 1ghz, now with debian it will only go to 720mhz, anyone know the way around that? Aug 08 15:12:23 set the governor to performance Aug 08 15:12:35 you should be able to set the frequency from the cli as well Aug 08 15:13:48 odd cpufreq-info says it will only go to 720mhz Aug 08 15:14:09 whats the cli? Aug 08 15:16:35 is this a beagleboard or beaglebone black Aug 08 15:16:40 sounds like the beagleboard Aug 08 15:16:51 the beaglebone black will do 1ghz Aug 08 15:16:58 cli = command line interface Aug 08 17:05:43 hi Aug 08 17:06:25 how can I contribute to this community? I am 3rd year electronics engineering student Aug 08 17:12:07 anyone? Aug 08 17:13:35 patience Aug 08 17:13:46 it's a pretty broad question... Aug 08 17:21:08 @vagrant: where can I get answer then? Aug 08 17:38:26 hi guys I have debian installed on my beaglebone black and I need to compile the fbtft driver/module for my beaglebone black. What kernel headers should I install if trying to build this driver as a module Aug 08 21:23:21 Hello everyone Aug 08 21:23:52 can I ask questions in here? Aug 08 21:24:39 I am trying to get my beagle bone to play video but it is very choppy. Do you know if there is a format that works best? Aug 08 21:30:08 choppy could be a busy system, slow reads from source, bad files etc. **** ENDING LOGGING AT Sat Aug 09 02:59:59 2014