**** BEGIN LOGGING AT Sat Jan 10 02:59:59 2015
Jan 10 05:40:36 <embed> Hai all, Am using touch screen lcd and when i apply cape-bone-iio overlay . An not getting AIN0-AIN7. Why so?
Jan 10 07:10:22 <tbr> embed: what OS (exact version and kernel version) are you running?
Jan 10 07:23:01 <palani> I have installed os on BBB but it is not show the drive in my laptop including usb driver installed for BBB
Jan 10 07:25:55 <palani> could you help me?
Jan 10 07:32:23 <tbr> palani: which OS and how did you install it?
Jan 10 07:46:13 <palani> debian os... I had  write debian image file on my 4gb memory card and then insert to BBB.
Jan 10 07:49:00 <palani> this os installed to taken 17 minutes .after installing os automatically all USR led were off condition
Jan 10 07:50:22 <tbr> ok, then remove card and restart the device
Jan 10 07:51:21 <palani> I removed card and I plug usb to my laptop... here is no response
Jan 10 07:52:41 <palani> Including I also installed usb driver for BBB in laptop
Jan 10 07:54:09 <tbr> are the leds blinking?
Jan 10 07:55:34 <palani> USR 0 is always blinking and USR 2 is ON with low brighness.. other all led are OFF
Jan 10 07:56:08 <palani> USR 1,4 are always OFF condtion
Jan 10 07:57:53 <tbr> sounds like it's booted then
Jan 10 08:04:27 <tbr> in the past it used to take fairly long on first boot for the USB device to show up
Jan 10 08:04:58 <tbr> after flashing, make sure to reboot the device and wait at least 10 minutes for the device to show up over USB
Jan 10 08:05:14 <tbr> if you interrupt that the installation might be destroyed and you need to reflash
Jan 10 08:17:41 <palani> no sound
Jan 10 08:32:58 <palani> hello tbr ...
Jan 10 08:33:05 <palani> pls ans me
Jan 10 08:33:21 <tbr> what does "no sound" mean?
Jan 10 08:33:29 <tbr> there is no question I could answer...
Jan 10 08:34:30 <palani> You asked me "sound" so I replied
Jan 10 08:35:10 <palani> how can connect BBB to LAPTOP
Jan 10 08:35:41 <palani> Give me some instruction .. tbr
Jan 10 08:52:12 <tbr> "meh"
Jan 10 16:47:20 <arvind> Hey! I am new here and am interested to contribute. can someone guide me through please?
Jan 10 17:13:16 <enclis> hello everyone!
Jan 10 17:16:30 <enclis> last 2 hours I've tried to extract eMMC content on BBB according to this - http://elinux.org/BeagleBone_Black_Extracting_eMMC_contents
Jan 10 17:17:04 <enclis> but it does not work me
Jan 10 17:21:21 <enclis_> anybody here?
Jan 10 17:21:23 <agmlego> enclis_: Can you give any further information?
Jan 10 17:21:43 <agmlego> Your query as it stands is unsolvable and uninteresting; add more detail and we may help.
Jan 10 17:22:30 <enclis> I cant boot with prepared SD card
Jan 10 17:22:51 <enclis> I hold S2 button before powering up BBB
Jan 10 17:23:07 <enclis> but user LEDs do nothing
Jan 10 17:23:21 <agmlego> Are you sure you made the SD card correctly?
Jan 10 17:24:22 <enclis> year I'm sure, I've checked many times
Jan 10 17:24:39 <agmlego> And yet it fails to boot.
Jan 10 17:24:50 <agmlego> Does the bone boot from the image on the eMMC?
Jan 10 17:24:50 <enclis> yes it is
Jan 10 17:25:32 <enclis> yes it is for both questions
Jan 10 17:26:37 <agmlego> How did you check that the SD card image is correct?
Jan 10 17:27:58 <enclis> how to check this?
Jan 10 17:30:08 <agmlego> Well, a couple of things. First, the .img file you downloaded (or sometimes a .img.xz file) should also have an MD5SUM file in the same download directory. Use that the check the integrity of the image you downloaded.
Jan 10 17:30:32 <agmlego> Second, if you can at all try a different computer or different reader, thast would help with diagnostics.
Jan 10 17:30:58 <agmlego> Third, how are you powering the bone? Some images require more power than USB can provide, and boot unreliably on USB power.
Jan 10 17:31:54 <enclis> it is not an image file
Jan 10 17:32:09 <enclis> its just couple of files
Jan 10 17:32:12 <enclis> in zip
Jan 10 17:32:30 <agmlego> ...what.
Jan 10 17:32:36 <agmlego> What did you download?
Jan 10 17:32:44 <enclis> I've downloaded beagleboneblack-save-emmc.zip and extract the contents onto my uSD card.
Jan 10 17:32:52 <enclis> http://elinux.org/BeagleBone_Black_Extracting_eMMC_contents
Jan 10 17:34:00 <agmlego> Ah, OK.
Jan 10 17:34:28 <agmlego> I have no idea what might be going wrong in that process.
Jan 10 17:36:56 <enclis> Is anybody here who tried to extract  an image from eMMC ?
Jan 10 17:37:50 <enclis> ... and I'm sorry for my english
Jan 10 17:38:04 <agmlego> enclis_: YOur English is fine.
Jan 10 17:38:14 <agmlego> Have patience--this is a channel of idlers.
Jan 10 17:38:26 <enclis> ok
Jan 10 17:39:29 <enclis> how long should I hold S2 button to start booting from SD-card?
Jan 10 17:40:22 <agmlego> enclis_: The page you linked tells you that.
Jan 10 17:40:25 <enclis> or it does not matter how long ...
Jan 10 17:41:06 <agmlego> "You'll notice USR0 (the LED closest to the S1 button in the corner) will *(after about 20 seconds)* start to blink steadily"
Jan 10 17:41:12 <enclis> there is no information on how  long
Jan 10 17:41:24 <enclis> 20 seconds?
Jan 10 17:41:31 <agmlego> Which tells me that you might expect to hold that button until 20-30s has gone by.
Jan 10 17:43:10 <enclis> heh, i've already tried to hold it for 1second, 5 seconds, 10 seconds, 20 seconds...it does not work :(
Jan 10 17:44:13 <agmlego> ::shrugs::
Jan 10 17:46:17 <enclis> and who is "idlers" ?
Jan 10 17:46:21 <enclis> :)
Jan 10 17:47:20 <agmlego> People who are connected to, but not actively watching, the channel.
Jan 10 17:47:25 <agmlego> As in, people who idle.
Jan 10 17:49:53 * Mikaela is somewhat watching this channel but she won't get her Beagle until Monday because it's waiting at post office
Jan 10 17:51:56 <enclis> ah, ok, thanks
Jan 10 18:05:20 <beest> Mikaela: time for a ninja heist, i'll grab the rope and C4
Jan 10 18:05:49 <Mikaela> ?
Jan 10 18:06:22 <beest> the post office!
Jan 10 18:07:08 <Mikaela> ah
Jan 10 18:07:11 <Mikaela> I can wait
Jan 10 18:07:24 <beest> fine, ruin all my fun.
Jan 10 18:10:35 <Mikaela> sorry :(
Jan 10 20:57:14 <enclis> i have finally boot from uSD, but script didn't do what it should.
Jan 10 20:58:20 <enclis> and now my beaglebone acts very weird
Jan 10 21:27:38 <yakymenko> hi
Jan 10 21:27:49 <yakymenko> any body?
Jan 10 21:28:46 <yakymenko> hi
Jan 10 21:29:32 <yakymenko> may i conect to beagle 3 usb devices?
Jan 10 22:39:06 <enclis> why beaglebone booting from uSD card without pressing S2 button at all??
Jan 10 22:41:31 <enclis> I've just flashed https://rcn-ee.net/rootfs/2015-01-06/flasher/BBB-eMMC-flasher-ubuntu-14.04.1-console-armhf-2015-01-06-2gb.img.xz
Jan 10 22:42:50 <enclis> cat /proc/version now gives me Linux version 3.14.26-ti-r43 (root@a6-imx6q-wandboard-2gb) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-19ubuntu1)
Jan 10 22:55:58 <enclis> Extracting eMMC contents dont work anyway :(
Jan 11 00:26:48 * zmatt wonders what use case TI had in mind for using the Display PLL to provide the PRUSS clock
Jan 11 00:27:34 <zmatt> (as alternative to the default L3F clock)
**** ENDING LOGGING AT Sun Jan 11 02:59:58 2015