**** BEGIN LOGGING AT Sun Mar 29 02:59:59 2015 Mar 29 14:01:04 hello , i want to know the file to set for pulse width modulation for beagle on the ubuntu kernel Mar 29 15:05:33 what is the name of the file to set pin as analog pwm in the ubuntu kernel ? Mar 29 17:04:39 hi, i have updated the kernel on my bbb to vanilla 4.0 (rc5) and of course there is no capemgr there. i know that i have to "hardcode" the overlays now but i would like to keep it modular... Mar 29 17:05:04 i know that include statements are allowed but my first try failed. it compiled the dtb but did not boot Mar 29 17:05:13 no diagnostics whatsoever Mar 29 17:05:45 does anybody know some good related documentation? Mar 29 19:39:19 Hello Mar 29 19:41:12 is anybody using a compiled stock kernel/device tree on a BBB without third-party patches or a distribution kernel? I am trying with a longterm release (3.14) and buildroot and have problems with USB Mar 29 19:41:25 Is a stock kernel supposed to work with a BBB? Mar 29 19:44:54 yes Mar 29 19:45:02 but you should use a newer one Mar 29 19:45:11 try 3.18 and newer Mar 29 19:48:20 KotH: are there only some issues with 3.14 or just doesn't work altogether? Mar 29 19:50:29 dont remember Mar 29 19:50:33 * KotH doesnt own a beagle Mar 29 19:50:58 Koth: thanks, I will try with 3.18 as it is also a longterm kernel Mar 29 19:53:09 jsolano: I think the general arm defconfig should work, if that fails the omap defconfig. Also make sure the device tree you use is up to date. Mar 29 19:53:29 there are quite a few people using a vanilla kernel Mar 29 19:56:57 jsolano: i am new to using vanilla kernels on the bbb myself... but i was able to build and boot 4.0 successfully with the procedure outlined by this: http://dpaste.com/32KTWC9 Mar 29 20:03:08 jsolano: there are still basically 2 "latest" kernels, one TI and one mainline with patches Mar 29 20:03:50 even latest TI does not have as much cape support as previous TI i believe Mar 29 20:04:11 so it really depends on what cape/hardware support you need Mar 29 20:05:44 the 2 above are documented on robert's wiki: https://eewiki.net/display/linuxonarm/BeagleBone+Black Mar 29 20:06:38 older u-boot on eMMC might need v69 of that page unless you want to upgrade your flash Mar 29 20:07:37 *use current page versions but v69 partition layout plus MLO, etc Mar 29 21:27:58 stefanct: thanks, will try that procedure. My needs are quite basic, just getting usb working to connect an usb-ethernet device (for nfs) so that I can use the onboard ethernet for other stuff Mar 29 21:29:42 nerdboy: thanks, if I find problems might try the TI kernel Mar 29 22:00:38 jsolano .. host usb is known to be a little glitchy on the beagle .. and the root stems froma hardware issue Mar 29 22:01:09 in case you weren't aware. Its been patched to hell and back, but you may still find issues. Mar 29 23:41:42 hi , i need help , i receipt with archlinux , 47401300.usb-phy supply vcc not found, using dummy regulator Mar 29 23:43:01 i guess that is usb client Mar 30 01:26:43 anyone use archlinux-arm ? Mar 30 01:26:52 anyone know how to display 7inch touch lcd instead of HDMI? Mar 30 01:40:01 luciano: Well I'm on Archlinux without the -ARM part Mar 30 01:40:59 luciano: that ought to change soon, depending how fast the delivery guy gets here Mar 30 01:42:05 neem0, You know how to enable client usb in archlinux arm ? Mar 30 01:46:57 luciano: nope, sorry. Mar 30 01:47:19 luciano: A fast google found this though http://blackfin.uclinux.org/doku.php?id=linux-kernel:usb-gadget Mar 30 01:48:09 neem0, I load module but not found usb0 interfaces Mar 30 01:50:00 anyone use waveshare lcd driver..? Mar 30 01:52:05 luciano: well, that's not nice. I can't give you any proper info by stabbing in the dark though Mar 30 01:53:33 luciano: I can try to replicate your issue when my BBB arrives and get back to you, but it'll take a bit more **** ENDING LOGGING AT Mon Mar 30 02:59:59 2015