**** BEGIN LOGGING AT Sun Apr 26 02:59:59 2015
Apr 26 04:55:04 <tpp321> Hi, I have a beagleboard xm. Please tell me if the serial port in the board is RS232 or uart? Is it safe to connect a uart-usb converter to that db9 port?
Apr 26 04:56:48 <tpp321> anybody here???
Apr 26 04:59:47 <tpp321> I am working on this project which I have to finish tomorrow. If anybody knows please tell me asap. Thanks in advance.
Apr 26 05:05:23 <_av500_> tpp321: XM is not TTL on the DB9
Apr 26 05:05:34 <_av500_> you need a real USB2RS232
Apr 26 05:15:35 <tpp321> _av500: thanks for the reply. Is there any point in xm where there is TTL uart access?
Apr 26 05:30:37 <tbr> it probably has a few more UARTs
Apr 26 05:30:47 <tbr> just mux one of them
Apr 26 05:31:38 <tbr> that's then going to be 1.8V vref IIRC
Apr 26 05:43:07 <_av500_> tbr: one the other side of the MAX232
Apr 26 05:43:17 <tbr> that too
Apr 26 05:43:20 <_av500_> but you will need to desolder at least the MAX232 TX
Apr 26 05:43:32 <_av500_> otherwise it will fight with your USB2TTL TX
Apr 26 05:43:33 <tbr> hence I suggested one of the others
Apr 26 05:44:09 <tbr> would need to check TRM, but IIRC OMAP3 had 3 UARTS?
Apr 26 08:24:17 <kinkazu> hi
Apr 26 08:24:43 <kinkazu> anybody knows what to edit in dtb-rebuilder to get analog inputs working?
Apr 26 08:25:08 <kinkazu> 4.0-bone0 kernel
Apr 26 11:07:11 <kinkazu> hi
Apr 26 11:07:14 <kinkazu> anybody here?
Apr 26 11:07:22 <kinkazu> anybody is using 4.9 kernel?
Apr 26 11:07:24 <kinkazu> 40
Apr 26 11:07:36 <kinkazu> 4.0 :)
Apr 26 11:33:47 <julemand101> kinkazu: yes I do.
Apr 26 11:49:20 <kinkazu> julianduque: do yuo know how to enable adc?
Apr 26 11:49:32 <kinkazu> :D
Apr 26 11:49:36 <kinkazu> gone
Apr 26 11:51:57 <kinkazu> julemand101:
Apr 26 11:52:12 <kinkazu> do you know how to enable adc?
Apr 26 11:52:46 <leoleo> I install Debian on my Beaglebone Black but HDMI doesn't work.Can somebody help me?
Apr 26 11:52:52 <kinkazu> julemand101: I edited am33xx.dts in dtb-rebuilder, compiled, copied
Apr 26 11:52:58 <julemand101> I don't even know what abc is (unless you think the first three letters of the alphabet) :)
Apr 26 11:53:24 <kinkazu> julemand101: analog to digital converter, analog pins
Apr 26 11:53:33 <kinkazu> julemand101: AIN0 AIN1 and et
Apr 26 11:54:05 <kinkazu> julemand101: do you use dtb-rebuilder?
Apr 26 11:54:08 <julemand101> kinkazu: well, I don't use the abc of the board so I cannot help you
Apr 26 11:54:53 <kinkazu> julemand101: do you use any gpio?
Apr 26 11:55:34 <julemand101> my beaglebone is used as a media center and simple server. I don't use it for circuit and elektronic :)
Apr 26 11:55:46 <kinkazu> julemand101: ow, undrstand
Apr 26 11:56:00 <kinkazu> julemand101: thank you anyway
Apr 26 11:56:33 <julemand101> np. Sorry I could not help you
Apr 26 11:56:52 <kinkazu> julemand101: at leas you offered our help, that is important
Apr 26 11:57:03 <kinkazu> your help
Apr 26 11:57:06 <kinkazu> :)
Apr 26 12:12:13 <leoleo> I install Debian on my Beaglebone Black but HDMI doesn't work.Can somebody help me, how to do diagnostics?
Apr 26 12:16:38 <leoleo> HDMI Screen Flickering......Can somebody help me?
Apr 26 12:20:16 <kinkazu> leoleo: I can't
Apr 26 12:20:45 <kinkazu> leoleo: do you know how to read analog pins in 4.0 kernel?
Apr 26 12:24:58 <kinkazu> cat /sys/devices/platform/ocp/44e0d000.tscadc/TI-am335x-adc/iio:device0/in_voltage2_raw?
Apr 26 12:31:02 <tbr> kinkazu: have you tried looking at the overlay source as used for the older kernels as inspiration?
Apr 26 16:31:57 <Rodion> is there anyone who can help?
Apr 26 16:38:23 <veremit> no. no, there isn't
Apr 26 19:17:31 <GenTooMan> has anyone worked with gnuradio on the BBB?
Apr 26 19:31:47 <kevinrjohnson> Is there any sort of audit process when posting to beagleboard.org/discuss ? I've tried to post a question twice, and I don't see it posted. I haven't recieved any emails either.
Apr 26 19:33:45 <kevinrjohnson> Perhaps I needed to click "Join Group" before I could post a topic. I've joined the group now
Apr 26 19:35:00 <_av500_> its moderated
Apr 26 19:35:10 <_av500_> first posters need to be approved
Apr 26 19:35:15 <_av500_> sorry, but too much spam
Apr 26 19:36:03 <kevinrjohnson> Oh ok! That's fine. I was just concerned because I got literally no feedback. :) How long does that process usually take?
Apr 26 19:36:59 * GenTooMan wouldn't know at all.
Apr 26 21:27:25 <akki> Hi, I am using bbxm-ubuntu-14.04.1-console-armhf-2015-01-06-2gb.img.xz on beagleboard xm. I want to use aroud 12 gpio's in the expansion header. I heard that i have to configure pinmux. Could someone please tell what is the easiest way to do it? I have to submit a project based on this tomorrow.
Apr 26 21:29:44 <akki> If possible from userspace. I have been googling around for the past 4 hours. Read some stuff about DTB. As I dont have much time spend on this I need the easiest way. Could someone please point me in the right direction?
Apr 26 21:57:13 <akki> anybody here??
Apr 26 22:08:12 <stt_michael> no
Apr 26 22:08:24 <stt_michael> the 274 nicks doesn't give a clue.
Apr 26 22:09:32 <GenTooMan> their is no idle tracking sorry. also not everyone can answer you question or has a clue :D
Apr 26 22:21:12 <stt_michael> ;D
Apr 26 22:21:23 <stt_michael> I need to adjust me colours on here .. done the one at home
Apr 26 22:21:31 <stt_michael> much easier to see the trees in the wood
Apr 26 22:32:51 * GenTooMan is a twee and IRC is the wood?
Apr 26 22:44:29 <stt_michael> o,o
Apr 26 22:44:48 * GenTooMan hehs "anyhow" :D
Apr 26 22:50:05 <troo> Is there any beagleboard image in which all the gpio in the expansion port are enabled??
Apr 26 22:50:14 <troo> *beagleboard xm
Apr 26 22:51:14 <GenTooMan> not sure I thought that was taken care of through the devices albeit very slowly
**** ENDING LOGGING AT Mon Apr 27 02:59:59 2015