**** BEGIN LOGGING AT Sun May 10 02:59:59 2015 May 10 03:47:19 Beagleboard-xM Rev. A3 with bricked bootloader =( May 10 03:48:09 I have a JTAG to reflash it but couldn't find the files. May 10 04:21:50 \ May 10 08:27:38 hi mates! i'm using the debian jessie image from elinux.org on the BBB, and i'm happy about having the rtcwake working out-of-the box. it is using kernel 3.14.41-ti-r63 and do not have the capemgr. can i find a doc telling how to use dtb's without capemgr? i do not need to change port settings from userspace. thank you May 10 09:06:39 aphex: essentially it's then about moving the overlay things into dtsi and having separate dtbs for everything May 10 09:07:04 aphex: soon there will be a 4.x kernel with working overlay and cape manager, I hear May 10 09:10:52 tbr: that sounds really good! so now, instead of digging deep into it, i will wait for that 4.x kernel :) thank you for the info! May 10 09:13:22 I know rcn-ee wanted to get something going, so it might be already there or will appear shortly. May 10 09:18:10 Hi. Anyone used BeagleBone Black for automated greenhouse/terrium control? Controlling water flow, recording sensor data to a DB, remote monitoring, etc? May 10 09:37:53 soupisgoodfood: I think there is some project that also works on the BBB. May 10 09:38:22 * tbr is currently building a bit of his own as he's playing with wireless sensor networks May 10 09:38:55 Wireless sensor networks sounds interesting. May 10 09:39:38 simple 802.15.4/6LoWPAN enabled micro-controllers. one of my beagles is currently the 6LoWPAN gateway May 10 09:41:13 I've thought about a little device (maybe Audrino based?) and having light, moisture, temperature sensors that you just stick into a pot plant. May 10 09:41:42 Light and water could still be centralised. May 10 09:44:32 currently I have 8 "moisture" sensors wired into the ADC pins and sense the temperature internally from the microcontroller. May 10 09:45:22 the latter sucks though. need to get some sort of 1-wire sensor going, preferably to sense soil temperature, as I need to compensate soil conductivity changes May 10 09:48:12 Would be good to have soil and air temp. Do you have 8 water sensors for 8 plants? I've thought about 3 for each plant; one at the bottom, middle, and just under the surface. May 10 09:53:41 I don't see the need forthat May 10 10:35:10 Got a link to that project? May 10 10:36:38 nothing public for now May 10 16:35:22 hi May 10 23:31:16 #@$!@#@!#^!@ they really don't want folks using batteries May 10 23:48:39 hi? May 11 00:29:12 ds2: what now? :) May 11 00:29:37 also, lol, I think someone at JEDAC had the bright idea of running spelling correction on this standard, or something May 11 00:30:03 in any case, the DDR3 "A12/BC_n" pin apparently is now known as "A12/Bacon" May 11 00:30:11 *JEDEC May 11 00:31:10 (JESD79-3-3 page 4) May 11 00:36:02 zmatt: the holes for the 4 pins are smaller on the newer revs May 11 00:36:24 the original fits the standard 0.1 stuff. the new ones requires smaller post to fit the holes May 11 00:37:16 huh, we have rev C beagles and have no such no problem May 11 00:37:41 rev C is the bigger eMMC right? May 11 00:37:46 the latest May 11 00:37:58 might be revB had them... I only have As and Bs May 11 00:41:22 other than very recent ones (purchased in the last few months) and an old A5A May 11 00:41:33 *other than ... I only have an old A5A May 11 00:42:22 no reply yet from TI in the PMU forum :P May 11 00:43:56 in a few years, you might see your post shown in websters under Dead Silence. May 11 00:44:30 that place is pretty low volume though, and I posted on friday, so I'll give them some time to notice (my topic is still near the top on the first page) **** ENDING LOGGING AT Mon May 11 02:59:58 2015