**** BEGIN LOGGING AT Mon May 11 02:59:58 2015
May 11 05:48:27 <prasad> hi
May 11 05:51:52 <prasad> i need  technical support
May 11 05:52:48 <prasad> i want ti interface 2 cameras and keybord and laser printer through USB
May 11 05:53:31 <prasad> Can u support which board i have to purchase and what kind of support i will get
May 11 09:39:11 <Penguin___> Does anyone know how to set up a wireless wifi adapter on the beaglebone black?
May 11 09:40:22 <CityLights2> yes, I actually wrote a program that will automate it
May 11 09:40:32 <CityLights2> but I will release it on the weekend
May 11 09:41:01 <CityLights2> which wifi adapter have you got?
May 11 09:41:18 <Penguin___> LM006
May 11 09:42:29 <CityLights2> do you know which chipset is used?
May 11 09:44:05 <CityLights2> did you install the latest debian image by RCN?
May 11 09:44:08 <Penguin___> No I don't. I'm kinda new to all these kinds of things. How do I find out?
May 11 09:44:16 <CityLights2> I see
May 11 09:44:54 <CityLights2> do you have a keyboard and screen connected?
May 11 09:45:31 <Penguin___> No, I'm connected through USB
May 11 09:46:00 <Penguin___> but i can use PuTTY
May 11 09:53:44 <Penguin___> in the datasheets of my wifi adapter I found that the chipset is RTL 8188CUS
May 11 09:54:32 <CityLights2> o ok
May 11 09:54:50 <CityLights2> so, can you ssh or putty to the BBB?
May 11 09:55:12 <Penguin___> yes I can
May 11 09:55:14 <CityLights2> can you run this command : ip addr show
May 11 09:56:18 <Penguin___> Yes I did, do I have to copy the entire output?
May 11 09:56:32 <woglinde> pastebin please
May 11 09:56:38 <woglinde> not in the channel
May 11 09:57:06 <CityLights2> I am now using the new debian jessie and comman is very easy to use
May 11 09:57:46 <CityLights2> connman
May 11 09:58:18 <Penguin___> http://pastebin.com/tHnWiNG0
May 11 09:58:45 <CityLights2> but you are connected via wireless it seems
May 11 09:59:35 <CityLights2> woglinde: which network manager is the default one?
May 11 09:59:50 <CityLights2> seems it is using USB0 while wlan0 is availble
May 11 10:00:03 <Penguin___> normally I shared my laptop's internet connection through USB
May 11 10:00:23 <Penguin___> but the wifi adapter is already inserted in the BBB as well
May 11 10:00:30 <woglinde> CityLights2 uhm default is ifup/down
May 11 10:01:02 <CityLights2> I see
May 11 10:01:49 <CityLights2> Penguin: can you install connman? sudo apt-get install connman
May 11 10:03:31 <Penguin___> it's installing...
May 11 10:04:00 <CityLights2> sweet, it will be easy now
May 11 10:07:03 <Penguin___> it has finished running, but I think it didn't go as planned
May 11 10:07:05 <Penguin___> http://pastebin.com/WdVZ4Svv
May 11 10:14:42 <Penguin___> Do you have a solution or should I just try again?
May 11 10:25:34 <Penguin___> When I want to reinstall it, it says that it already is the latest version of connman, so I guess it has succesfully installed
May 11 10:25:41 <Penguin___> what do I do now?
May 11 10:55:58 <CityLights2> back from lunch
May 11 10:55:59 <CityLights2> ok
May 11 10:56:18 <Penguin___> ok awesome!
May 11 10:56:44 <CityLights2> run: connmanctl
May 11 10:56:50 <CityLights2> then services
May 11 10:57:12 <Penguin___> Error: The name net.connman was not provided by any .service files
May 11 10:57:44 <CityLights2> here is a good guide
May 11 10:57:47 <CityLights2> https://wiki.archlinux.org/index.php/Connman
May 11 10:57:54 <CityLights2> I see
May 11 10:58:03 <CityLights2> can you reboot the BBB?
May 11 10:58:46 <Penguin___> rebooting!
May 11 10:59:38 <CityLights2> I will also advice using this guide: https://eewiki.net/display/linuxonarm/BeagleBone+Black
May 11 11:00:08 <CityLights2> then installing the new Debian 8 image on your BBB
May 11 11:00:18 <CityLights2> it comes preinstalled with connman
May 11 11:00:50 <Penguin___> it has rebooted
May 11 11:01:17 <Penguin___> has do I install the new Debian 8 image?
May 11 11:01:21 <Penguin___> *how
May 11 11:02:45 <Penguin___> or did it already happen with the connman installation?
May 11 11:06:10 <CityLights2> it was a general comment
May 11 11:06:26 <CityLights2> can you connect to your BBB after the reboot?
May 11 11:07:17 <Penguin___> yes
May 11 11:07:38 <Penguin___> I entered the  connmanctl command
May 11 11:07:45 <Penguin___> and then services
May 11 11:08:07 <Penguin___> but nothing happened (not even the error)
May 11 11:08:31 <CityLights2> ok, open the guide: https://wiki.archlinux.org/index.php/Connman
May 11 11:08:49 <Penguin___> yes
May 11 11:09:06 <CityLights2> now, let see, issue: enable wifi
May 11 11:09:11 <CityLights2> then scan wifi
May 11 11:09:17 <CityLights2> then services again
May 11 11:09:28 <CityLights2> do you see your wireless network?
May 11 11:11:20 <Penguin___> yes I do
May 11 11:11:21 <Penguin___> http://pastebin.com/qx6Jmf6B
May 11 11:13:40 <Penguin___> and then I just use the connect command to connect to that network...
May 11 11:13:49 <Penguin___> that's awesome
May 11 11:14:07 <CityLights2> to use a password you can use:
May 11 11:14:21 <CityLights2> agent on
May 11 11:14:28 <CityLights2> then connect to the service
May 11 11:14:34 <CityLights2> have fun
May 11 11:14:43 <Penguin___> and is it possible to connect to the BBB using a smartphone or laptop
May 11 11:15:11 <CityLights2> sure, assume the smartphone is also connected to the same wireless
May 11 11:17:08 <Penguin___> and for example in the following guide: http://inspire.logicsupply.com/p/connecting-to-smart-phone.html
May 11 11:18:08 <Penguin___> I just have to install the socket.io and write a html and javascript program and I'm on my way...
May 11 11:18:44 <CityLights2> sure
May 11 11:19:05 <CityLights2> you can even do less, but using socket.io is fun
May 11 11:19:20 <Penguin___> ok, thank you very much
May 11 11:19:24 <Penguin___> you're my hero!
May 11 11:19:51 <CityLights2> you can even connect the BBB to you home stereo system and play music to the system from your phone
May 11 11:20:18 <CityLights2> but do run ip addr on the BBB, so you can tell its IP address
May 11 11:21:40 <Penguin___> ok, awesome!
May 11 11:22:31 <woglinde> uhm
May 11 11:50:20 <wolf91> ,hi, i have a problem with serial comunication. i set comunication acording to a qnx documentation : Baudrate: 115200
May 11 11:50:22 <wolf91> • Data: 8 bit
May 11 11:50:24 <wolf91> • Parity:no
May 11 11:50:26 <wolf91> • Stop: 1 bit
May 11 11:50:28 <wolf91> • Flow control: none
May 11 11:50:30 <wolf91> and i get with start neutrino:
May 11 11:50:32 <wolf91> |=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2015.05.10 00:36:42 =~=~=~=~=~=~=~=~=~=~=~=
May 11 11:50:34 <wolf91> ("IP!I"I"IIPH(P$H)(IB!$! )!I"H"H!!
May 11 11:50:36 <wolf91> when i try communicate with debian i get similar unintelligible characters
May 11 11:50:38 <wolf91> i tested my serial converter with resistor between tx and rx and it's working fine. have you any ideas why i can't see normal words? THX
May 11 12:38:13 <Peanut> Is RCN around? I've flashed the 'console' version of the 2015-03-01 Debian release. I can see that it brings up an USB-ethernet interface, but apparently doesn't do DHCP (not server not client) There's also no serial-over-USB?
May 11 12:44:26 <immo_> hi folks, I try to upgrade my BBB but the "opkg upgrade" says http://feeds.angstrom-distribution.org/feeds/v2012.12/ipk/eglibc/armv7a-vfp-neon/machine/beaglebone/angstrom-feed-configs_1.0-r16.5_beaglebone.ipk is not available... And I agree there is just a version 16.6
May 11 12:44:38 <immo_> what can I do ?
May 11 12:44:51 <tbr> reflash the whole thing
May 11 12:45:21 <immo_> OMG .... nothing else ?
May 11 12:46:01 <immo_> We had a trainee who installed some realtime linux additions so this would break everzthing
May 11 12:46:36 <tbr> then why are you trying to opkg upgrade?
May 11 12:46:57 <immo_> just to keep it up2date ?
May 11 12:47:10 <immo_> OK we|ll keep it on the old version...
May 11 18:07:56 <jinting> hello
May 11 18:09:06 <jinting> can anybody tell me if it is possible to install linux without desktop to Beaglebone?
May 11 18:09:39 <Humpelstilzchen> probably the majority is running without desktop
May 11 18:10:01 <jbdatko> jinting, check out any of the images listed as "console" here: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Debian_Releases
May 11 18:11:26 <jinting> I excellent! thanks jbdatko
May 11 19:36:09 <zmatt> ah, so that's what the flash of light was... one of my lightbulbs had turned into a darkbulb
May 11 20:13:27 <CityLights2> well , If someone can help me package a python, I will release this
May 11 20:22:39 <foundatron> CityLights2: release what?
May 11 21:59:40 <CityLights2> I need help packaging
May 11 21:59:46 <CityLights2> I got: http://nopaste.linux-dev.org/?475364
May 11 22:00:16 <CityLights2> the main debuild output was:  http://nopaste.linux-dev.org/?475362
May 11 22:00:23 <CityLights2> how to deb?
May 11 22:50:37 <HyP3r> Hey all, I'm tring to setup uart (uart1), in Debian Jessie with the Beagle Bone Black.
May 11 22:51:00 <HyP3r> First of all I did run this: http://eewiki.net/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-Upgradedistro%22device-tree-compiler%22package
May 11 22:51:14 <HyP3r> Then I installed this https://github.com/adafruit/adafruit-beaglebone-io-python
May 11 22:51:52 <HyP3r> But if I run UART.setup("UART1") (in Python) I get Unable to export UART channel.
May 11 22:53:03 <HyP3r> I think the correct device tree file is not loaded, but I have no clue about this topic
May 12 02:03:08 <zacts> hi I'm having a difficult time booting my microSD card on my beaglebone black
May 12 02:03:17 <zacts> I don't know how to debug my issue
May 12 02:03:26 <zacts> or what information to provide
May 12 02:04:25 <zacts> I am using a 128GB microSD card
May 12 02:04:29 <zacts> and let me show you which distro I'm using
May 12 02:04:56 <zacts> and how I used 'dd' to burn the image into the microSD from a debian jessie amd64 gnu / linux host OS distro
May 12 02:07:03 <zacts> ok I was following this guide http://elinux.org/BeagleBoardDebian#BeagleBone.2FBeagleBone_Black
May 12 02:07:15 <zacts> and this is the image I'm using: https://rcn-ee.com/rootfs/2015-05-08/microsd/bone-debian-8.0-console-armhf-2015-05-08-2gb.img.xz
May 12 02:08:06 <veremit> you sure a uSD that size is supported?
May 12 02:08:11 <zacts> I have no idea?
May 12 02:08:54 <veremit> I think the controller is only .. erm .. XHDC ? maybe ..
May 12 02:11:14 <zacts> hm.. can I boot a beaglebone black from a usb?
May 12 02:11:27 <zacts> and use the usb stick rather than the microSD?
May 12 02:16:24 <veremit> not without some special commands
May 12 02:17:05 <zacts> ah ok
May 12 02:17:24 <zacts> well, it seems that SDHC microSD supports up to 32GB?
May 12 02:17:31 <zacts> was XHDC a typo for SDHC?
May 12 02:17:44 <zacts> if so I'll just get a 32GB SDHC microSD
May 12 02:21:02 <veremit> just trying to look up the specs :)
May 12 02:22:21 <zacts> veremit: but was XHDC a typo for SDHC?
May 12 02:22:26 <zacts> I can look up the specs myself too
May 12 02:22:52 <zacts> what is odd is that my 128GB microSD cards have the SDHC logo on them and not SDXC
May 12 02:22:55 <veremit> probably
May 12 02:23:00 <zacts> and https://www.sdcard.org/developers/overview/capacity/
May 12 02:23:08 <zacts> ^ this shows that SDHC only supports up to 32GB
May 12 02:23:13 <veremit> there's an sdxc maybe
May 12 02:23:20 <zacts> although, I did get my microSD cards on ebay
May 12 02:23:23 <veremit> ah
May 12 02:23:34 <zacts> so perhaps they were from an off-the-wall manufacturer
May 12 02:23:40 <zacts> they were really cheap too
May 12 02:23:53 <zacts> let me try 32GB, laters
May 12 02:24:04 <zacts> and if 32GB doesn't work, I'll try 16GB
May 12 02:24:16 <zacts> I can live with 16GB, but 32GB would be perfect
May 12 02:24:26 <zacts> I just got 128GB for the price thinking I would get more space for less
May 12 02:24:47 <zacts> oh well, I do have a phone, and a tablet, that may work with the 128GB
May 12 02:29:34 <veremit> :)
May 12 02:29:46 <veremit> most likely a duff card .. second most likely .. too big :p
May 12 02:29:57 <veremit> I can't find the spec for the SDIO yet .. but its there in the docs somewhere .. lol
**** ENDING LOGGING AT Tue May 12 02:59:59 2015