**** BEGIN LOGGING AT Fri Jun 12 02:59:59 2015 Jun 12 05:14:35 ebola vaccine was found in the moinatins of papua new guinea in the form of a giant chicken species sacrificed by locals during the harvest festival Jun 12 05:51:29 can we get beaglebone black without female connectors Jun 12 05:52:15 you could always desolder them if it's just one board you need Jun 12 05:53:11 thank you Jun 12 05:55:53 kunal: you can talk to circuitco directly Jun 12 05:56:02 they offer "custom" boards Jun 12 05:56:14 if you order in numbers :) Jun 12 05:56:31 number 1, number 2, number 3.... Jun 12 05:56:40 54! Jun 12 05:57:31 * tbr would like to place two orders of 26 boards as he needs 54 Jun 12 06:33:36 what is the difference between beaglebone black and beagleboard xm Jun 12 06:38:04 pritam: its a completely different board. Jun 12 06:38:18 pritam: specs can be found at http://beagleboard.org/ Jun 12 06:39:10 in terms of performance Jun 12 06:39:46 pritam: completely different board in terms of everything. look at the specs. Jun 12 06:40:29 if you explain your use case, then someone might be able to tell you about suitability Jun 12 06:52:04 about dsp? Jun 12 06:57:41 pritam: BBB has none... sorry, have you ever looked at the specs before asking? Jun 12 07:06:51 Hi all Jun 12 07:08:44 what is the correct section of the forum where I can post a job advertisement concerning BeagleBone? Jun 12 07:39:49 tupakamaru: you mean the mailing list? Jun 12 09:26:13 Hmm, the usb0 interface does not configure according to /etc/network/interfaces - Are there another service in charge of usb0 ip address? Jun 12 09:27:11 Knaldgas: the usb modules and networking is set up by a systemd service on the debian images Jun 12 09:28:18 tbr: Ok, I've been searching for the ip address in /etc and in /lib/systemd, but not found it... Jun 12 09:28:30 Do you know where that configuration is stored? Jun 12 09:29:05 no, find the script and look at it Jun 12 09:37:29 Found ifup@usb0.service which is just started by ExecStart=/sbin/ifup --allow=hotplug %I Jun 12 09:41:08 Ok, found it in /opt/scripts/boot/am335x_evm.sh - Thanks tbr :) Jun 12 09:42:20 :) Jun 12 09:42:38 This script is not particular elegant IMHO Jun 12 09:43:11 I'm sure rcn will accept patches Jun 12 09:44:08 Am considering what can be done :) Jun 12 09:50:10 why switched rcn from interfaces anyway? Jun 12 11:13:07 hi all, last night we tried to run an access point using a tl-wn723n which uses the realtek 8188eu Jun 12 11:13:52 I also tried the source at https://github.com/jenssegers/RTL8188-hostapd Jun 12 11:14:07 did anyone here managed to use it as an access point? Jun 12 12:22:26 Right, solved the issue, and can now use /etc/network/interfaces to control ip-address set-up on usb0 (including the udhcpd) Jun 12 12:30:58 the setup of usb0 outside interfaces(5) appears somewhat weird to me too. at least there should be a comment in the interfaces file pointing to the script that actually does the job, imho Jun 12 12:32:24 samael: Yes, I've made a patch, and am now looking for the best way to submit it... Jun 12 12:34:10 Well, what I did was to adapt the script so it read the values from /etc/network/interfaces, let it modify /etc/udhcpd.conf (with a comment on which script is managing it) :) Jun 12 12:34:32 sounds good Jun 12 12:34:45 Do you have time to test the patch? Jun 12 12:34:54 or anyone else here? Jun 12 12:35:15 Knaldgas: did you find the github repo? Jun 12 12:35:34 I don't think I found the right one, no Jun 12 12:37:16 Knaldgas: with debian 8.0 you can use connman for that Jun 12 12:37:56 citylight2: Right, well the "latest" release is a Wheezy in my case Jun 12 12:38:02 7.8 Jun 12 12:38:35 Knaldgas: https://github.com/RobertCNelson/tools/blob/master/scripts/beaglebone-black-g-ether-load.sh Jun 12 12:39:04 Oh dear... Jun 12 12:39:32 The file I changed was: am335x_evm.sh Jun 12 12:39:34 at least that's my best guess at it being the script in question Jun 12 12:39:51 The content looks very much like what I started up from Jun 12 12:40:18 maybe it gets renamed in the image build process? Jun 12 12:40:27 or your wheezy image is old Jun 12 12:42:14 I'm using "bone-debian-7.8-lxde-4gb-armhf-2015-03-01-4gb.img.xz" Jun 12 12:42:40 you can always mail rcn to check with him Jun 12 12:42:59 But the copyright notice does refer to him, so I'll go that way :) Jun 12 12:43:01 Thanks Jun 12 13:55:15 In case you want the patch: http://pastebin.com/VrJfvMUV :-) Jun 12 16:30:24 any hint how to disable all bonescript services on the beagleboneblack ? what are the systemd service names ? Jun 12 17:41:36 Hello, I got a little problem with me BBB… I doesn't boot anymore. Whether from eMMC nor mSD. Just displays "C"-char on serial Jun 12 17:51:45 hi there Jun 12 17:52:13 does anyone know what's the deal w/ tigal ? Jun 12 17:52:34 bbb.org says i should buy my bbb there, but tigal filed bancrupsy (at least here, in austria) Jun 12 17:52:58 i'm just wondering where to return my 2 fried revC's Jun 12 17:53:02 just buy at digikey ... or even amazon Jun 12 17:53:13 fry_: COntact circuitco directly. Jun 12 17:53:52 agmlego: whom? Jun 12 17:54:06 circuitco.com ? Jun 12 17:54:49 Yeah, the people who actually make the bone. Jun 12 17:55:13 besser82: will it boot from uSD if you power it on with the "boot" button held down? Jun 12 17:55:41 smurray, yes, now it does… forgot to dd MLO / uboot.img onto mSD :( Jun 12 17:56:29 found their homepage, filling out the contact form at the moment Jun 12 17:56:36 besser82: heh, been there Jun 12 17:56:42 it wont boot from either the labroratory supply nor usb Jun 12 17:56:49 power led just flashes once i connect Jun 12 17:56:58 pressing the power button makes it flash once more Jun 12 17:58:16 do you get anything on the serial port at all? Jun 12 17:58:41 smurray, after booting from mSD yes Jun 12 17:58:58 all is fine… so I can start restoring Jun 12 18:00:24 ty agmlego Jun 12 18:00:51 thanks a lot smurray ! Jun 12 18:04:25 np Jun 12 19:46:41 http://ge.tt/1fjZ8DI2/v/0 Hot Pictue Me ^^ XXXX Jun 12 19:46:45 http://ge.tt/1fjZ8DI2/v/0 Hot Pictue Me ^^ XXXX see Me Here Jun 12 19:48:12 seems legit Jun 12 19:52:32 http://ge.tt/1fjZ8DI2/v/0 Hot Pictue Me ^^ XXXX Jun 12 19:52:39 http://ge.tt/1fjZ8DI2/v/0 Hot Pictue Me ^^ XXXX Jun 12 19:58:15 lol Jun 12 19:59:13 yeah, what could possibly be wrong with that file https://www.virustotal.com/en/file/3484b571cda7a136be654ad3d7c3345acc09fe5234b9d65407cc8f7aeb413fbc/analysis/1434139022/ Jun 12 20:14:08 so has anyone succeeded in streaming video from the beaglebone black using the logitech c920? I need/want to stream video with gstreamer using my beaglebone black and a c920 Jun 12 20:14:48 mistawright: your best chance is to forward the stream without reencoding Jun 12 20:15:58 tbr: exactly the c920 does encoding on board I just have been having a hell of a time finding a working setup for streaming video using gstreamer and a rtsp stream Jun 12 20:16:43 good luck, if in doubt use ffmpegcolorspace and !queue! ;-þ Jun 12 20:47:33 lol ffmpegcolorspace is gstreamer 0.10 Jun 12 20:48:12 yes, I know Jun 12 20:48:35 but it's one of those classic things with notoriety of "just use it it fixes things" Jun 12 20:48:52 * tbr finds cargo cult amusing... Jun 12 20:49:28 mistawright ???? rtp stream and gstreamer is easy Jun 12 20:49:53 I used it to make the desktop streaming via udp/rtp Jun 12 20:49:56 with h264 Jun 12 22:32:27 hello everyone..need your guys help.. Jun 12 22:34:26 Hello everyone.. Jun 12 22:35:48 anyone there..I really need some advise. Jun 12 22:38:25 Needed some advice on cross compilation.. Jun 12 22:43:10 dont "ask" to ask. Jun 12 22:51:08 anyone abl to answer my question regarding cross compilation.. Jun 13 00:36:56 I don't believe anyone here is clairvoyant, so no. Jun 13 01:31:30 lol **** ENDING LOGGING AT Sat Jun 13 02:59:59 2015