**** BEGIN LOGGING AT Fri Jul 03 02:59:59 2015 Jul 03 04:43:41 ? Jul 03 04:44:18 ! Jul 03 04:49:27 /msg NickServ VERIFY REGISTER iiifff xbpxanedygcm Jul 03 04:50:32 now Jul 03 09:39:01 Hi, using kernel 4.1.0-bone9, I tried loading an overlay with beaglebone-universal-io: "config-pin overlay cape-universala", but had errors and dmesg said: Could not find symbol 'gpio4'. What is the meaning of this? Jul 03 09:41:49 Iam trying to connect P8_12 to eqep2 Jul 03 12:07:54 hi, anyone using latest stable buildroot on bbb (2015.05-rc3)? build is correctly generated and I can ping the board. I don't have serial cable yet so I've added dropbear but ssh connection is refused Jul 03 12:08:18 also tried to add busybox telnetd but I get conection refused Jul 03 12:10:17 I've tried to see if is a dropbear problem, so I built a qemu image with buildroot but dropbear accepts my connection Jul 03 12:11:05 sadly serial is the easiest way in this Jul 03 12:11:10 you could try add logging Jul 03 12:11:22 I know. that's what I was abouty to ask... Jul 03 12:11:40 never done it before, I can try Jul 03 12:12:42 I've seen "log dropbear access to lastlog/wtmp" option in buildroot Jul 03 12:13:10 but I don't know if I have to enable something else beside this Jul 03 12:30:12 wtmp would only be relevant on successful logon Jul 03 12:31:22 tbr: ok, thank you Jul 03 12:32:49 david-e: there is #buildroot - the people there might know more on how to log startup failures of services etc Jul 03 12:33:40 tbr: I've just asked: thanx for the tip though Jul 03 12:33:46 but yeah, if you haven't ordered it yet, get a serial cable. sooo much easier to dig into things Jul 03 12:34:59 tbr: I've ordered it buth won't get it until next week when I'll be on holiday. I wanted to try today to see if I can get into it... Jul 03 13:05:40 Guys, is Plugging BeagleBone Black in the USB and DC supply totally acceptable and supported ? Jul 03 13:05:53 at the same time? Jul 03 13:06:07 I think there are diodes Jul 03 14:40:04 hi thr, I have beaglebone black and a NXP's JN5168 microcontroller. both are connected using UART to USB cable. I'm using pyserial to on BBB to send and receive data from microcontorller. I have python code to send data from BBB to microcontroller. When I try my python code on PC-microcontroller it works like charm. But when I try same code on BBB microcontroller receives data from BBB for first time and microcontroller hangs. Is there Jul 03 14:40:07 output Jul 03 14:40:58 Please suggest I'm stuck in my project Jul 03 14:44:19 Please help Jul 03 15:05:47 hi thr, I have beaglebone black and a NXP's JN5168 microcontroller. both are connected using UART to USB cable. I'm using pyserial to on BBB to send and receive data from microcontorller. I have python code to send data from BBB to microcontroller. When I try my python code on PC-microcontroller it works like charm. But when I try same code on BBB microcontroller receives data from BBB for first time and microcontroller hangs. Is there Jul 03 15:05:50 output Jul 03 15:06:04 Hey, I cross compiling a library in Ubuntu to run in Beagle Bone, when try to run it I getting this error " /lib/arm-linux-gnueabihf/libc.so.6: version `GLIBC_2.17' not found " Jul 03 15:08:30 I using g++-4.6-arm-linux-gnueabihf from Ubuntu precise, http://packages.ubuntu.com/precise/g++-4.6-arm-linux-gnueabihf Jul 03 15:42:13 Any ideas of how to get a compatible cross toolchain for the beagle bone black? Jul 03 16:13:08 hi here Jul 03 16:40:11 Guys, I am doing a research on popular open source projects that run on the different Beagleboard models. Do you know any? Thanks in advance! Jul 03 17:06:26 Zenobia: http://veterobot.com/techinfo.html Jul 03 17:06:46 Current robot version uses TI's BeagleBoard-xM as on-board computer. Jul 03 21:41:50 Hi, I have a Beaglebone black, but I'm a little bit confused as to how to flash it. I have a 4GB uSD card with Debian prepared, and now I'm trying to flash it. The instructions get really obscure at this point. I don't care where it gets installed, either uSD or eMMC is fine, but what's the easiest way to proceed? Jul 03 21:42:22 I do know I need to put the card in and then hold down the BOOT button, but where will that install do and how long do I hold it down? Jul 03 21:42:38 Once the installation starts, how can I tell something is actually happening? Jul 04 00:51:22 Cherokee7700 https://learn.adafruit.com/beaglebone-black-installing-operating-systems/flashing-the-beaglebone-black Jul 04 01:17:25 hello Jul 04 02:52:44 DarkSector, thank you, but I've already followed that Jul 04 02:53:03 In fact, I cannot get get firmware on this no matter what Jul 04 02:53:26 I tried loading a flasher image, and while I got the LEDs going back and forth, they always ended up flashing (which apparenyl indicates a failure) Jul 04 02:53:40 The board won't get a DHCP lease from my router, so I have no clue what's going on with it **** ENDING LOGGING AT Sat Jul 04 02:59:58 2015