**** BEGIN LOGGING AT Sun Sep 27 02:59:59 2015
Sep 27 17:13:56 <vik_> hi
Sep 27 17:14:34 <vik_> folks please help me out to figure out pins mapping to ttyS1 on beaglebone black
Sep 27 17:15:20 <vik_> which pins over the bbb i need to connect as Rx and Tx with ttyS1
Sep 27 17:16:09 <vik_> folks please help me out to figure out pins mapping to ttyS1 on beaglebone black
Sep 27 17:16:45 <tbr> have you looked at the SRM yet?
Sep 27 17:18:02 <vik_> no
Sep 27 17:18:12 <vik_> what is that .
Sep 27 17:18:22 <vik_> i m beginner with bbb
Sep 27 17:18:30 <vik_> please elaborate
Sep 27 17:19:00 <rob_w> he talks about reading manuals etc
Sep 27 17:19:11 <tbr> System Reference Manual
Sep 27 17:19:17 <tbr> there is one for the BBB
Sep 27 17:19:19 <_av500_> work of the devila!
Sep 27 17:19:20 <tbr> look it up
Sep 27 17:19:40 <vik_> is it available on bbb site
Sep 27 17:20:09 <tbr> if not then, perusing a search engine should yield useful results
Sep 27 17:20:27 <vik_> yes got it
Sep 27 17:20:32 <vik_> thanks a ton
Sep 27 17:39:38 <vik_> folks please help me out to figure out pins mapping to ttyS1 on beaglebone black
Sep 27 17:40:11 <vik_> i have gone through the manual however it has give UART0 and UART1
Sep 27 17:40:21 <vik_> UART1 is ttyS1
Sep 27 17:40:29 <vik_> ?
Sep 27 18:48:53 <Geir63_> Have just started EE40LX Electronic Interfaces and I'm trying to get my MSP-EXP430G2 controller working.  Was able to upload & run code but now it seem like I'm not able to connect.  Onle the red LED is on.
Sep 28 02:34:18 <mrpacketheadd> KotH_:  dont' suppose you are awake
**** ENDING LOGGING AT Mon Sep 28 02:59:58 2015