**** BEGIN LOGGING AT Tue Apr 19 03:00:00 2016 Apr 19 03:53:47 Ha. Apr 19 08:48:29 hello Apr 19 08:49:33 I'm counting on your experience to recommand me the most c library for beagle gpio Apr 19 08:49:48 thanks in advance Apr 19 08:56:55 hallo Apr 19 08:58:02 wie kann ich die qwerty auf qwertz umstellen Apr 19 08:58:36 hallo jojo Apr 19 09:20:08 hello, please anyone let me know specification version of eMMC memory on Beagle Board - X15 Apr 19 09:22:52 * tbr goes to look for his board Apr 19 09:25:12 this RevA2 X15 has an eMMC with following markings: Kingston; 2400291-001.A00G-a; 1510 2791449; EMMC04G-S100 Apr 19 10:55:12 help Apr 19 10:56:08 just started project Apr 19 10:56:29 on beaglebone black Apr 19 10:56:43 not getting any idea Apr 19 11:01:07 any idea on what? รต.O Apr 19 11:01:28 beaglebone black Apr 19 11:03:03 * tbr fails to understand the problem Apr 19 11:03:05 so you're just lacking ideas what to do with the board? Apr 19 11:03:32 * Ionakka neither understands Apr 19 11:04:31 no i am doing project by using beaglebone black but unable to do programming using windows operating system Apr 19 12:04:03 Hi! , i'm working whit bb black with the Linux beaglebone 4.1.15-ti-rt-r43 Apr 19 12:23:47 is there a channel for talking about usb gadget drivers for usb ethernet on beaglebone? Apr 19 12:31:50 davis: try asking your real question, wait for answers Apr 19 12:31:52 http://www.catb.org/esr/faqs/smart-questions.html Apr 19 12:32:24 i am trying to get a usb networking working on a beaglebone black Apr 19 12:32:52 I have configured a bunch of options overtime in the gadget section of the kernel for this Apr 19 12:33:14 but when I modprobe g_ether I get an errors in dmesg Apr 19 12:33:27 the first is couldn't find an available UDC Apr 19 12:33:45 then later I get tilcdc timeout waiting for framedone Apr 19 12:34:02 I looked up tilcdc and it shows up as a LCD driver. Apr 19 12:34:26 I'm wondering if that is a red herring since this device does not have an attached lcd Apr 19 12:35:03 which distro are you running on the BBB? Apr 19 12:36:34 itss a yocto build. Its from a vendor. Apr 19 12:37:24 the kernel is a kernel.org kernel though. Apr 19 12:43:00 davis: why not run the official Debian? Apr 19 12:43:05 it has working ethernet over USB Apr 19 12:44:11 hello Apr 19 12:44:26 we are using this vendor build for some mods they made, sadly I'm gated for talking to the vendor because support cost $ Apr 19 12:45:00 is it possible to run standalone C, C++ code on the beagle with out the OS linux? Apr 19 12:45:27 there is a thing called zephyr, maybe it will help Apr 19 12:46:21 u got a link for me? Apr 19 12:47:25 Rudolfs: Afaik TI's compiler is designed for bare metal coding like that. May look as some tutorials there. Apr 19 12:48:07 Ofc any compiler can do it. I mean their CCS IDE with their compiler may be simpler. Apr 19 12:48:10 hmm... wonedring if arm-none-eabi-gcc would be sufficient Apr 19 12:48:18 davis: you still might want to compare the debian images and scripts and kernel configs Apr 19 12:48:37 davis: if you can't talk to vendor support, then you need to do the legwork yourself Apr 19 12:49:03 davis: btw 4.1.15-ti-rt-r43 is most decidedly NOT a kernel.org vanilla kernel Apr 19 13:07:15 hello Apr 19 13:07:43 hello Apr 19 13:08:10 can i use beaglebone black in windows OS Apr 19 13:08:15 tbr thanks. Possibly that is the problem. Apr 19 13:08:45 the vendor used a kernel.org kernel but the ti kernel you mentioed above has a working setup while this one does not. Apr 19 13:09:00 mahen: you mean if you have a windows PC? Apr 19 13:09:07 yes Apr 19 13:09:13 davis: which version of the kernel did they use? Apr 19 13:09:23 mahen: yes, beagleboard.org has instructions Apr 19 13:09:35 via uname on the running board its 4.1.10 Apr 19 13:09:53 one sec and I can look up the source in yocto Apr 19 13:10:04 you mean OE Apr 19 13:10:41 how can i setup the instructions? Apr 19 13:10:46 "https://www.kernel.org/pub/linux/kernel/v4.x/linux-${LINUX_VERSION}.tar.xz Apr 19 13:10:57 the linux version var is 4.1.10 Apr 19 13:13:50 which processor is used in beaglebone? Apr 19 13:14:53 its arm. possibly omap. not sure. I would look it up on wiki. Apr 19 13:15:07 okay Apr 19 13:15:19 model name : ARMv7 Processor rev 2 (v7l) Apr 19 13:15:33 that is what my cpuinfo shows on this board while running. Apr 19 13:15:49 ok Apr 19 13:16:27 while running the beaglebone i am getting beep sound continuously? Apr 19 13:17:07 what is the problem after connecting beaglebone to my PC? Apr 19 13:17:16 i'm not sure. have you attached a usb cable and see if the serial console is showing any info? Apr 19 13:17:51 yes i did Apr 19 13:18:08 not showing any info Apr 19 13:18:50 how can i get datasheet on beagle bone? Apr 19 13:19:21 i would look at the wiki Apr 19 13:19:38 okay Apr 19 13:23:15 are you there? Apr 19 13:23:59 no Apr 19 13:30:24 how is this for an approach Apr 19 13:30:37 I have an error about unknown cdc Apr 19 13:30:47 I look in the beagle git source for the kernel Apr 19 13:31:00 navigate to the drivers/usb/gadget src Apr 19 13:31:48 cross reference all the CONFIG if defs there with what is enabled in the arch/defconfigs/bbconfig and enable those same options in my build Apr 19 13:32:42 since this kernel did not have any of the gadget configs enabled, maybe that will at least get me in the right ball park Apr 19 13:34:53 datasheet? Apr 19 13:58:53 davis: it's not an omap, it's an AM3358 ( http://www.ti.com/product/AM3358 ) Apr 19 14:00:12 specifically AM3358BZCZ100 iirc Apr 19 14:52:28 Hello everyone! I wonder how I can attach a new LCD to the beaglebone black. This is not a cape yet. Apr 19 14:53:41 I looked through much stuff but did not find the exact answer. Apr 19 14:54:29 Wires! The secret is wires! How those wires are used is up to you; you have to assign pins and sling code and stuff, or mimic what the cape does and use existing code. Apr 19 14:56:22 Something should be altered/added in fbtft_device module, but what exactly and where else (in addition to fbtft_device) I don't know. Apr 19 14:57:17 Sounds like you're trying to mimic what the cape does. Beyond me there. Apr 19 14:58:00 This is an LCD which is not "caped" yet. Apr 19 15:12:35 what kind of interface? Apr 19 15:12:45 he left Apr 19 15:12:48 oh Apr 19 15:12:53 so not a stable interface Apr 19 15:12:56 lol Apr 19 15:54:28 hello, is there a RealTime support for BBB and what is the latest supportd kernel version? Apr 19 15:55:06 I found only some 3.x kernel RT_PREEMPT patches, but anything for 4.x Apr 19 17:21:54 mckoan|away: there are -rt series for both 4.1-bone and 4.1-ti Apr 19 21:47:31 hello all, i'm trying to do a datalogger out of an bbb, first i need is lowest power as possible, help on that?? Apr 19 21:53:57 . Apr 19 23:16:16 VKS **** ENDING LOGGING AT Wed Apr 20 02:59:58 2016