**** BEGIN LOGGING AT Thu May 19 02:59:59 2016 May 19 03:00:47 how to pre-order the beagleboard x15 May 19 03:05:26 zmatt: sounds funky.. May 19 03:05:30 Is that like pre-ordering a Time Machine? May 19 03:05:40 Or a flying car? May 19 03:05:53 I'd rather like a time machine .. can I get one, please? May 19 03:06:27 You have to pay your kids to send you one from the future. That's how I got mine. May 19 03:07:39 they goofed though, they sent it too me in time *before* I paid them. May 19 03:09:12 http://www.spinics.net/lists/linux-omap/msg129101.html ... there, let's see this makes sense to anyone :P May 19 03:10:16 it's a nice subject line anyhow May 19 03:15:18 zauslande: oops May 19 05:59:35 hi May 19 05:59:46 I am new to beagle board May 19 06:00:16 Need to know about debugging May 19 06:00:27 I am going to buy beagle board black May 19 06:00:49 Upto which level I can debug the code May 19 06:01:07 and what are thesoftware tools as well as hardware tools? May 19 06:02:49 Please let me know if someone knows May 19 09:02:22 Hey, Im trying to boot my beaglebone (the white one) from the sd card. I already put the current image on the sd. then i connected the board via usb. the power led is on, however the user led dont do anything at all. any help? May 19 09:25:13 He's gone ... May 19 09:31:57 sounded pretty desperate May 19 09:50:21 but not patient May 19 12:37:28 Hi, I tried to use the pwm output of the bbb (debian Jessie). Yesterday I visualize a pwm signal on the oscillo (I was happy ;). The problem is online tutos are outdated and I don't know if I use it right. My first question is about the dts May 19 12:38:58 I go to /opt/source/beaglebone-universal-io and echo cape-universaln > /sys/devices/platform/bone_capemgr/slots May 19 12:40:01 Yeserday it worked but now I have no response and then PuTTY error "Software caused connection abort". May 19 12:45:57 I'm following this https://briancode.wordpress.com/2015/01/06/working-with-pwm-on-a-beaglebone-black/ May 19 13:37:25 Hi May 19 15:42:50 libuiooooooo May 19 16:19:24 Hi guy's May 19 16:19:35 I need some help May 19 16:20:05 about uboot May 19 21:42:42 Does anybody know about power management on the BB Green (or Black). Is there a way to measure when the input power is low? Or when the consumed power is high? May 19 21:58:24 Hi Team, just a quickie: I'm looking for a SBC to run a Python application (as a webserver), a stand-alone instrument. I need 2 x real rs232 ports. Can you recommend a specific Beagleboard? cheers May 19 22:09:19 I am new for developing on BBB. I met an issue, and need senior BBB engineer's help. May 19 22:11:14 When I start BB and connect to it through usb to my laptop. I can access to BBB with IP -- 192.168.7.2 from this laptop only. May 19 22:12:27 When I connect BBB to my LAN through its RJ45 interface, I can't access it through this IP address (192.168.7.2). May 19 22:13:11 How should I use BBB's Ethernet interface? May 19 22:14:08 the 192.168.7.2 address is just configured through the usb etheret device May 19 22:14:56 the LAN interface is probably configured to do DHCP ... you can look at your router logs to see what address it got assigned May 19 22:15:15 or configure it to use static networking compatible with your network May 20 01:14:45 hi guys May 20 01:14:54 i have some question May 20 01:16:08 i want to use mii1 at u-boot **** ENDING LOGGING AT Fri May 20 02:59:58 2016