**** BEGIN LOGGING AT Sat Oct 29 03:00:00 2016 Oct 29 03:43:03 Hello everyone Oct 29 03:44:27 Can I use 5V/3A supply for the Beaglebone black? I am using a 40A ESC BEC and it provides me only a 5V/3A supply. Is it okay if I use it ? Oct 29 03:47:00 Guest59232: 5v/3a should be plenty Oct 29 03:47:32 Thank you Vagrant. Oct 29 03:47:43 BBB site recommends 5V/2A Oct 29 03:47:55 I thought the board will get shot if I use more than 5V/2A Oct 29 03:47:57 the amperage is a minimum Oct 29 03:48:00 That's why the question Oct 29 03:48:03 the voltage has to be pretty identical Oct 29 03:48:45 so any 5v supply with at least 2 amps should work Oct 29 03:49:04 Awesome. What would be the upper voltage and current limit for the BBB? Oct 29 03:49:08 Just for safety. Oct 29 04:29:13 hi Oct 29 04:34:57 hi Oct 29 04:57:31 * vagrantc waeves Oct 29 04:57:34 * vagrantc waves too Oct 29 05:03:14 Hello to everyone.! Oct 29 05:04:13 I need help to get a WM8960 audio dac to work on my beaglebone black. Oct 29 05:05:39 I made a custom overlay basedo on the BB-BONE-AUDI dts file...but when I reboot I cannot find any sound card Oct 29 05:06:37 I'm using debian 4.1 kernel Oct 29 05:07:50 thanks in advance for any help. Oct 29 07:32:11 hi Oct 29 07:32:52 any one there Oct 29 07:33:30 i am fasing a problem in instaling usb drivers for my beagle board xm Oct 29 07:33:39 any one please help Oct 29 07:42:44 i am fasing a problem in instaling usb drivers for my beagle board xm any one please help Oct 29 07:46:34 what do you mean by usb driver? Oct 29 07:47:12 BONE_D64 Oct 29 07:47:34 Install the drivers for your operating system to give you network-over-USB access to your Beagle. Additional drivers give you serial access to your board. Oct 29 07:47:59 ok, and what is the problem? Oct 29 07:48:18 it was not installing Oct 29 07:48:27 for my beagle board xm Oct 29 07:49:15 i am using windows 10 Oct 29 07:50:38 you downloaded the latest drivers from the beagleboard page? Oct 29 07:51:08 yes sir Oct 29 07:51:24 and how does the installation fail? Oct 29 07:52:00 i am geting a status as install fill Oct 29 07:52:08 install fail Oct 29 07:54:07 are you sure you are running the 64bit version of windows? Oct 29 07:54:16 yes sir Oct 29 07:56:57 does it specify which of the drivers fails to install? Oct 29 07:57:27 yes sir Oct 29 07:57:49 then pray tell us! Oct 29 07:58:54 Linux developer community (usber) ports (11/15/2012 5.1.2600.0) Oct 29 07:59:51 usber? maybe 'usbser'? Oct 29 07:59:54 beaglebone cdm package Oct 29 08:00:14 usbser Oct 29 08:00:24 anyway, that's "just" the serial driver. The network interface should still work. Oct 29 08:00:33 you might need to reboot your computer Oct 29 08:00:51 after all it's windows Oct 29 08:01:01 then please tell me how to communicate with begal Oct 29 08:01:31 this http://192.168.7.2 ip address is also not working Oct 29 08:01:47 through usb Oct 29 08:01:54 08:00:33< tbr> you might need to reboot your computer Oct 29 08:01:54 08:00:51< tbr> after all it's windows Oct 29 08:02:15 yes i done that too Oct 29 08:02:19 sir Oct 29 08:02:44 how to get my beagle board xm ip addres Oct 29 08:02:56 and which software are you running on the XM? Oct 29 08:03:18 Angstrom-TI-GNOME-image-eglibc-ipk-v2012.01-core-beagleboard-2012.01.11 Oct 29 08:03:38 I somehow doubt, that this will expose usb-networking and such Oct 29 08:04:16 get a RS232-C cable and interface with it that way Oct 29 08:05:36 i cannot connect with usb and external 5v power supply is given Oct 29 08:06:13 not USB Oct 29 08:06:21 a RS232-C cable! Oct 29 08:07:29 i dont have rs232-c cable sir . can i connect with usb as otg ? Oct 29 08:08:56 i am using ubuntu in vmware there when i use "ifconfig " command i am not getting xm ip address Oct 29 08:09:00 no Oct 29 08:09:25 get an serial cable then Oct 29 08:09:33 or a usb-to-rs232 cable Oct 29 08:09:51 for the BBxM and pretty much any other board it's a must have Oct 29 08:10:35 ok thanks sir Oct 29 08:11:34 after than can u tell me the procidure to load (ubuntu-12.10-console-armhf-2013-02-16.tar_2.xz) image into sd card in ubuntu Oct 29 08:11:53 *procedure Oct 29 09:59:49 hi any one there Oct 29 10:00:18 i want help Oct 29 10:01:04 during linux instlation to sd card Oct 29 10:02:27 hi Oct 29 10:02:36 i need help Oct 29 10:02:59 i had a problem during linux instlation to sd card Oct 29 10:04:06 i had a problem during linux instlation to sd card Oct 29 10:05:11 hi sir i had a problem during linux instlation to sd card Oct 29 10:13:37 hi Oct 29 10:16:44 sir, i had a problem during linux instlation to sd card Oct 29 18:34:56 Greetings. Oct 29 18:36:02 A course at my uni has us work with beagle boards, talking to it through a usb to serial cable. Oct 29 18:36:24 Does the beagle board require any special kernel modules in order to work with linux, aside from generic usb serial converter support? Oct 29 18:40:42 not really Oct 29 18:40:53 which type of beagle board? Oct 29 18:41:18 Eh, let me dig that information out for you, give me a minute :p Oct 29 18:51:11 Actually, it would seem that there's another board used this time, based on another board Oct 29 18:51:26 It's great when there's misleading information like that when looking at the course ... Oct 29 18:51:38 Thanks anyway, forget I was here.- Oct 29 18:52:39 :) Oct 29 18:53:24 The information on that board claims there shouldn't be any issues with that board with linux whatsoever Oct 29 19:00:14 you mean linux on the host pc? Oct 29 19:00:22 Exactly, yes Oct 29 19:00:38 that is usually no problem whatsoever Oct 29 19:01:16 actually doing embedded linux work from windows hosts is a pain most of the time Oct 29 19:01:30 should be no issues Oct 29 19:01:47 there is a mkudevrule on the getting start page: http://beagleboard.org/getting-started Oct 29 19:01:52 but you don't really need it Oct 29 19:02:07 just need minicom or something of the sort Oct 29 19:02:38 even PuTTY works Oct 29 19:04:23 just find the ttyUSBx in the /dev folder, then minicom (mostly likely need root) to /dev/ttyUSBx at 115200 baud **** ENDING LOGGING AT Sun Oct 30 02:59:59 2016