**** BEGIN LOGGING AT Sat Nov 26 03:00:00 2016
Nov 26 14:11:49 <dury> hi there channel :-)
Nov 26 14:12:05 <dury> nice to be back again :-)
Nov 26 14:53:24 <ivor> i have just tried to update image on bb black. and after an hour and a half the usr0 led still heartbeat flashing.
Nov 26 14:54:57 <ivor> i am looking at /etc/network and on eth0 i have no entry for address and netmask
Nov 26 14:55:50 <ivor> when i uname - a Linux beaglebone 4.4.30-ti-r64 #1 SMP Fri Nov 4 21:23:33 UTC 2016 armv7l GNU/Linux
Nov 26 14:56:40 <ivor> this is what it shows but the sd card is still inserted. bb does not load up if i remove sd card.
Nov 26 14:57:05 <ivor> eth0      Link encap:Ethernet  HWaddr a0:f6:fd:42:8e:16           UP BROADCAST MULTICAST DYNAMIC  MTU:1500  Metric:1           RX packets:0 errors:0 dropped:0 overruns:0 frame:0           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:1000           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)           Interrupt:173
Nov 26 14:58:40 <ivor> i changed inerfaces back from static to dhcp in etc folder
Nov 26 14:58:54 <ivor> clutching at straws
Nov 26 15:11:39 <iyvor> my beagle bone not seeem to flash image from latest images
Nov 26 15:16:45 <dury> iyvor, which image did you download
Nov 26 15:19:02 <iyvor> i downloaded  Debian 8.6 2016-11-06 4GB SD LXQT i
Nov 26 15:19:25 <iyvor> i was having problems not able to connect to internet over usb
Nov 26 15:20:02 <iyvor> and also i have a port scanned which says the ip address of bb black is different to 192.168.7.2
Nov 26 15:21:34 <dury> one sec. please
Nov 26 15:22:25 <iyvor> Dead	beaglebone	192.168.1.80			A0:F6:FD:42:8E:16		
Nov 26 15:22:36 <iyvor> is what it comes up as
Nov 26 15:26:47 <grace> hi......
Nov 26 15:27:10 <iyvor> hy can yu assist
Nov 26 15:27:38 <grace> from what..?
Nov 26 15:28:28 <iyvor> well im new to bb black and having problems updating image and getting bb black internet over usb working
Nov 26 15:29:07 <grace> lol... im also a newbie.... sorry
Nov 26 15:29:27 <iyvor> usr0 led been flashing for nearly two hours.
Nov 26 15:29:37 <iyvor> ok sorry
Nov 26 15:30:07 <grace> thts terrible..wish i cn help somehow
Nov 26 15:30:59 <iyvor> think ive been reading too many bad blogs and changing settings
Nov 26 15:37:13 <dury> iyvor, if you downloaded already that image put it in a sd-card the plug it in BBB turn on the device holding the botton near sd-cad
Nov 26 15:37:30 <dury> the = then
Nov 26 15:38:00 <dury> it will boot from sd-card
Nov 26 15:39:18 <iyvor> yes it does that but shouldnt i be able to remove sd card once its has flashed
Nov 26 15:40:26 <dury> I did the same procedure it works for me in 14GB sd card then I expanded the filesystem
Nov 26 15:40:46 <iyvor> my sd card ir 32GB
Nov 26 15:41:19 <dury> that image I guess is not for flushing the eMMC
Nov 26 15:41:41 <iyvor> exactly how do i solve that
Nov 26 15:42:01 <dury> there is another procedure
Nov 26 15:42:14 <fred_tv> hi, someone can help me with a (simple) wifi problem
Nov 26 15:42:26 <fred_tv> ?
Nov 26 15:43:20 <dury> iyvor, do you really want to flushing your BBB eMMC?
Nov 26 15:43:32 <iyvor> here is a copy of my uENV.txt file
Nov 26 15:44:01 <dury> iyvor, tell me yes or not?
Nov 26 15:44:25 <iyvor> im not sure what is best
Nov 26 15:44:35 <iyvor> i am a beginner
Nov 26 15:45:20 <iyvor> #Docs: http://elinux.org/Beagleboard:U-boot_partitioning_layout_2.0  uname_r=4.4.30-ti-r64 #uuid= #dtb=  ##BeagleBone Black/Green dtb's for v4.1.x (BeagleBone White just works..)  ##BeagleBone Black: HDMI (Audio/Video) disabled: #dtb=am335x-boneblack-emmc-overlay.dtb  ##BeagleBone Black: eMMC disabled: #dtb=am335x-boneblack-hdmi-overlay.dtb  ##BeagleBone Black: HDMI Audio/eMMC disabled: #dtb=am335x-boneblack-nhdmi-overlay.dtb  ##Beagle
Nov 26 15:45:23 <dury> is amstrong release in your device?
Nov 26 15:45:52 <iyvor> no i dont think so how do i check
Nov 26 15:46:30 <dury> type this -> lsb_release -a
Nov 26 15:47:14 <iyvor> bash command not found
Nov 26 15:47:43 <dury> uname -a
Nov 26 15:47:46 <iyvor> hold on this is what i get
Nov 26 15:48:17 <iyvor> No LSB modules are available. Distributor ID: Debian Description:    Debian GNU/Linux 8.6 (jessie) Release:        8.6 Codename:       jessie root@beaglebone:~#
Nov 26 15:50:30 <dury> so there you are iyvor you are not running amstrong you are on jessie, see?
Nov 26 15:50:45 <iyvor> after uname -a i get: 4.4.30-ti-r64 #1 SMP FRI NOV 4 21:23:33 UTC
Nov 26 15:51:21 <iyvor> Ok
Nov 26 15:52:19 <dury> that's Linux release or version
Nov 26 15:52:29 <iyvor> i can browse to board from start but if i try it from putty i am not connected to internet so it wont let me get GIT
Nov 26 15:52:44 <dury> the other one was the distribution name
Nov 26 15:53:03 <iyvor> ping 8.8.8.8 - network unreachable
Nov 26 15:53:36 <dury> calm iyvor, be patient
Nov 26 15:54:01 <iyvor> lol.. ill take my pills
Nov 26 15:54:57 <dury> how do you have your BBB connected, by usb cable only?
Nov 26 15:55:07 <iyvor> yes at moment
Nov 26 15:55:26 <dury> under windows?
Nov 26 15:55:34 <iyvor> windows 10
Nov 26 15:55:45 <dury> shit
Nov 26 15:55:54 <iyvor> lol
Nov 26 15:56:14 <dury> gessss I don't know how to do it under win
Nov 26 15:57:11 <dury> mine is connected directly to a monitor by its micro-hdmi connector
Nov 26 15:58:08 <dury> usb keyboard ethernet cable to the net and its power supplier
Nov 26 15:58:34 <iyvor> ok should i edit the :##enable BBB: eMMC Flasher: #cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh
Nov 26 15:59:11 <iyvor> i havent got a spare monitor so i tried it this way.
Nov 26 15:59:43 <dury> iyvor, gesss I really don't know buddy I'm a beginner like you though
Nov 26 16:00:07 <iyvor> ill let you know how i get on ill probably ending doing more damage
Nov 26 16:00:47 <dury> by the way where you typing from if you don't mind?
Nov 26 16:02:38 <dury> the key is to be patient with this device, I personally go steady steady
Nov 26 16:06:47 <dury> which Revision it's your BBB, iyvor, mine it's A5C, iyvor?
Nov 26 16:07:38 <dury> iyvor, you don't know, don't you?
Nov 26 16:08:21 <iyvor> no i dont ive had it about 10 months
Nov 26 16:08:34 <dury> right
Nov 26 16:09:44 <dury> it's on the box even in the board, left or right side, I guess
Nov 26 16:10:28 <iyvor> found it its Rev B6
Nov 26 16:10:53 <dury> older than mine I guess
Nov 26 16:11:01 <iyvor> K
Nov 26 16:13:05 <dury> http://elinux.org/Beagleboard:BeagleBoneBlack check this and have a look :-) iyvor
Nov 26 16:16:59 <dury> have to go .... my best iyvor with your device :-)
Nov 26 16:17:12 <dury> cheeersss all :-)
Nov 26 20:50:16 <iyvor> hy im trying to set up internet over usb from putty for  BB Black and i just checked my /var/lib/conman
Nov 26 20:52:10 <iyvor> there is no file for ethernet cable as in: drwx------  2 root root 4096 Jan  1  2000 ethernet_c8a030ab323a_cable
Nov 26 20:52:26 <iyvor> this is missing completely.
Nov 26 20:53:03 <iyvor> i can ping the bb from my command prompt in windows and vice versa from putty
Nov 26 20:53:31 <iyvor> ive included nameserver 8.8.8.8 in my resolv.conf file
Nov 26 20:53:41 <iyvor> i dont know what else to do
Nov 27 02:18:16 <onio> Hello I was wondering if anyone can help with splash screen on SBC which is spawn off the beagleoboard-xm
**** ENDING LOGGING AT Sun Nov 27 02:59:59 2016