**** BEGIN LOGGING AT Sat Apr 22 03:00:03 2017 Apr 22 03:03:58 Okay...thank you zmatt. Apr 22 03:05:03 I think I was just having trouble with enable/disable for the .dts stuff in the uEnv.txt file. Apr 22 03:06:11 I got a reading from a photocell. Get this...I had to use three 3.3k resistors instead of a 10k. Funny? Apr 22 03:13:45 Monk wrote the software for when Angstrom was around for the BBB. I got it from Adafruit's site. Apr 22 03:14:03 It works for Ubuntu, too. Apr 22 03:21:56 ... Apr 22 04:39:41 < on break Apr 22 05:47:33 Anybody know how to get at the PRU cycle counter from clpru? Apr 22 05:48:27 this: https://web-beta.archive.org/web/20161102132615/https://theembeddedkitchen.net/tag/beaglebone is about doing it with PASM, but i'm not sure how to translate Apr 22 05:48:30 LBCO &R1, C28, 0xC, 4 Apr 22 05:48:46 into its C dialect Apr 22 07:09:26 MagusOTB: C with PRUs is not very difficult. Here are a few examples : https://github.com/ZeekHuge/BeagleScope/tree/port_to_4.4.12-ti-r31%2B/examples Apr 22 07:24:15 zeekhuge: seen that :) I think I figured it out. Didn't have the bit to enable it set Apr 22 19:24:18 embarrassing. I reversed voltage on the 12V barrel connector on my BBBL. mouser doesn't have MP2615 in stock, and I'm not sure what else I might have destroyed. Any suggestions? Apr 22 22:18:12 12V ? 5V you mean? Apr 22 22:18:38 oh, blue, does that 12v? odd Apr 22 23:42:53 anyone? Apr 22 23:43:16 s Apr 22 23:43:46 anyone but nickserv? i want to shutdown the thing, it reboots instead... there should be a way of shuttind down a system, no? Apr 22 23:44:05 your are all asleep really? Apr 22 23:58:57 odd Apr 23 01:13:48 Having trouble getting my Beaglebone Black re-flashed Apr 23 01:15:04 Which images provide the connection over USB 192.168.7.2? Apr 23 01:22:15 Oooh maybe my computer just isn't set up for it Apr 23 01:33:06 I have powered on my Black via USB but a don't see storage showing up nor an ethernet connection Apr 23 01:48:34 ericxdu[m]: I thought most images do Apr 23 01:48:40 with possible exception of the console images Apr 23 01:48:59 Okay I'm now fairly certain I just corrupted the SD card two times in a row Apr 23 01:49:10 And it was booting from emmc Apr 23 01:49:36 if you power up while holding down the S2 button you can make sure it doesn't boot from eMMC Apr 23 01:49:39 If it had booted Debian correctly it would be working by now :-) Apr 23 01:49:51 zmatt oh okhy Apr 23 01:50:19 (note: it's only sampled at power-up, it's not resampled at reboot/reset) Apr 23 01:53:37 Okay thanks Apr 23 01:59:02 Gonna keep all that in mind after I finish flashing my SD card again Apr 23 02:33:34 Yay my beaglebone appeared under volumes Apr 23 02:42:49 \o/ **** ENDING LOGGING AT Sun Apr 23 03:00:00 2017