**** BEGIN LOGGING AT Wed Nov 01 03:00:03 2017 Nov 01 14:05:53 Good day. Anyone knows the temperature range of BeagleBoneBlue ? Is it like BBBlackIndustrial? i.e. -20 to 85 degrees celsius? Nov 01 16:51:59 I could not find any temperature range spec for the bbblue. the datasheet is always just 4 pages long. :| Nov 01 17:42:33 Do the PocketBeagle use any proprietary firmware for anything? Nov 01 18:36:57 Hello! Nov 01 18:46:39 Dang it...bye! Nov 01 19:28:23 Hello . I would like to know something about my backup procedure of the emmc of bb. Nov 01 19:30:41 If i execute sudo dd if=/dev/mmcblk1 of=/dev/mmcblk0 i get a backup on the external sd card. May i reuse this sd card to flash my emmc of bb?. Nov 01 19:48:56 On my bbb If i execute sudo dd if=/dev/mmcblk1 of=/dev/mmcblk0 i can get a backup on my emmc to the external sd card. May i reuse this sd card to flash my emmc of bb?. Nov 01 19:58:57 Hello i hope you are fine Nov 01 20:00:01 Is there an answer? Nov 01 20:12:30 zmatt: So if I'm understanding this correctly, the best way to get the power LED toggle would be to patch the leds-regulator driver to allow DT config and then update the BBB DT to use this config. Nov 01 20:21:50 frostsnow: sounds good. or use an overlay. in the meantime maybe use a free GPIO and an extra LED but that may not be worth it. Nov 01 20:22:12 noone knows temp range of beagleboneblue? Nov 01 20:23:28 aNone: The point was actually to *disable* the existing power LED (see scrollback a week ago) Nov 01 20:26:58 to use it for different purpose? (know a log for #beagle? http://beagleboard.org/apps/beagle/static/irclog not works) Nov 01 20:27:24 * aNone will check the bbblue bom for temp range ... Nov 01 20:27:56 No, just to turn it off so it doesn't keep me up at night :) Nov 01 20:28:25 I have i2c commands but zmatt said that they're racy and a better solution would be to have DT/kernel support. Nov 02 02:32:12 Just installed Debian 9.2 on my BBB. Can't get to it via USB ethernet. Nov 02 02:32:50 hi my beagleboard-x15 had thermal shutdown after that it can't turn on . how can i recover it **** ENDING LOGGING AT Thu Nov 02 03:00:00 2017