**** BEGIN LOGGING AT Fri Nov 23 03:00:01 2018
**** BEGIN LOGGING AT Fri Nov 23 05:33:47 2018
Nov 23 10:32:00 <Yasir> Hi
Nov 23 10:33:45 <Yasir> I tried booting a board. board is booting but im facing is in minicom not able to pass username and password in console
Nov 23 10:34:25 <Yasir> Please help
Nov 23 10:47:45 <tbr> Yasir: what console are you accessing? why are you not able to enter username and password?
Nov 23 10:54:55 <Yasir> Im getting boot log
Nov 23 10:55:47 <Yasir> Looks like tx issue. I chacked in verious websites connection is proper
Nov 23 10:58:24 <Yasir> I used ttyUSB0
Nov 23 11:04:54 <tbr> does it present you with a login prompt at all?
Nov 23 11:05:27 <tbr> is this a custom image or one of the official images (which?)
Nov 23 11:06:30 <Yasir> I have used images proveded by BBB
Nov 23 11:06:52 <tbr> ok, which one in particular?
Nov 23 11:07:16 <Yasir> https://debian.beagleboard.org/images/bone-debian-9.5-iot-armhf-2018-10-07-4gb.img.xz
Nov 23 11:08:26 <Yasir> Even its not taking keyboard  input in u-boot
Nov 23 11:09:13 <Yasir> <ethaddr> not set. Validating first E-fuse MAC Net:   cpsw, usb_ether Press SPACE to abort autoboot in 2 seconds switch to partitions #0, OK
Nov 23 11:09:18 <tbr> what sort of usb-to-serial device are you using to attach to the debug port?
Nov 23 11:09:32 <Yasir> usb serial
Nov 23 11:10:03 <tbr> yes, but what type? do you have a photo of it?
Nov 23 11:10:30 <Yasir> No i will take it and upload
Nov 23 11:10:42 <Yasir> Its possible upload here
Nov 23 11:11:51 <Yasir> USB-TTL
Nov 23 11:12:10 <Yasir> USB-STC-ISP
Nov 23 11:17:02 <tbr> https://pasteboard.co/
Nov 23 11:18:29 <tbr> https://cdn.instructables.com/F0L/DZH2/HFD1F0NF/F0LDZH2HFD1F0NF.LARGE.jpg?auto=webp like this?
Nov 23 11:22:27 <tbr> can you try a loopback test? Connect TX to RX on the serial adapter and see if you get each character that you type sent back to your terminal
Nov 23 11:24:15 <Yasir> I will check
Nov 23 11:27:05 <Yasir> That is also did work
Nov 23 11:27:12 <Yasir> I checked
Nov 23 11:28:45 <tbr> please check if you have wired it up correctly. compare to this: http://electronictoofree.blogspot.com/2018/01/beaglebone-black-uart.html
Nov 23 11:30:37 <tbr> when you look at the connector hilighted by the red square you should have GND on the right on pin 1. Then on pins 4 and 5 you should have RX (wired into TX on the usb2serial) and TX (wired into RX on the usb2serial)
Nov 23 11:32:12 <Yasir> I have same connection
Nov 23 11:33:53 <tbr> not sure why it doesn't work then. maybe try a different usb-to-serial device, preferably a different model.
Nov 23 11:35:31 <Yasir> Ok thanks for support
Nov 23 11:35:45 <Yasir> I will check with different usb
Nov 23 11:37:00 <tbr> if that fails, then the RX port might be damaged for some reason
Nov 23 12:40:02 <Yasir> Hey sorry it was usb isssue
Nov 23 12:40:36 <Yasir> It got solve. Thank you for helpping me
**** ENDING LOGGING AT Sat Nov 24 02:59:58 2018