**** BEGIN LOGGING AT Mon Dec 10 03:00:00 2018 Dec 10 03:21:27 https://www.irccloud.com/pastebin/oM27B32G/ Dec 10 03:22:49 @zmatt @hedgeberg. Thank you I think I connected to wifi Dec 10 03:22:57 https://www.irccloud.com/pastebin/sdYz7o3c/ Dec 10 09:51:12 hallo Dec 10 15:58:38 m Dec 10 16:02:18 n Dec 10 16:41:18 Have BBB with new image debian-9.5-iot, works fine, but when I mount the CBB-Serial-r02 it refuses to boot properly. uEnv.txt --> https://pastebin.com/Y3KDQe5Y Dec 10 16:41:29 What am I missing? Dec 10 16:42:58 "mount" is definitely not the word you're looking for Dec 10 16:43:11 what does this overlay contain? Dec 10 16:43:44 ah it's a standard overlay? hadn't expected that based on its weird name Dec 10 16:43:54 :) Dec 10 16:44:34 "mount"..., Then when I assemble the CBB-Serial-Cape onto the BBB :) Dec 10 16:44:40 phyically Dec 10 16:44:47 physically even Dec 10 16:45:20 ehm, so is the boot problem caused by merely the presence of the cape or by changing uEnv.txt ? Dec 10 16:45:39 It starts, and it does double-blinks with first LED, third is blinking sometimes Dec 10 16:46:05 normally for a physical cape you don't need to change anything in /boot/uEnv.txt .. although the name of this overlay is a bit strange so I don't know if this cape has working autodetection Dec 10 16:46:07 Presence of cape. Started with standard installation debian-9.5-iot, didn't boot with cape installed Dec 10 16:46:46 Standard installation had am335x-boneblack-robotics... as dtb Dec 10 16:47:02 no a standard installation doesn't Dec 10 16:47:20 Oh? ... hold on Dec 10 16:47:48 I overlooked the dtb override in your /boot/uEnv.txt ... please don't use a system that's been messed by the robotics stuff installer for use other than with the robotics cape Dec 10 16:48:09 a normal uEnv.txt does not set the "dtb" override variable Dec 10 16:49:37 I'm pretty sure I just used the bone-debian-9.5-iot-armhf-2018-10-07-4gb.img.xz, removed apache2 and installed rxvt-unicode-256color emacs-nox git Dec 10 16:50:06 that's not what the comment at the top of your /boot/uEnv.txt says Dec 10 16:50:47 Hmm, what have I done then? - I'll try a fresh flash then Dec 10 16:52:28 At least the flasing image do boot and starts flashing :) Dec 10 16:55:42 in other words the unmodified image works too (since the flasher is the same apart from setting the "init" kernel variable to point to the flasher script) Dec 10 16:56:25 Yes, I just cannot recall that I did any roboticscape related stuff during installation... Dec 10 16:56:45 strange. it would be good to figure out what caused it then Dec 10 16:57:18 e.g. if installing updates caused it, rcn needs to be informed with the higest urgency Dec 10 16:57:52 It's the same image that I used before (which should be bone-debian-9.5-iot-armhf-2018-10-07-4gb.img.xz). Well, I'll check before I do any other stuff after it has completed flashing. Dec 10 16:59:27 * Knaldgas bites his nails while it reboots after flashing... Dec 10 17:12:35 (.. but doesn't bother sharing the results) Dec 10 17:12:48 Still working Dec 10 17:13:10 12 minutes since you said it was rebooting? o.O Dec 10 17:13:34 or do you mean, it's still in a working state and you're trying to figure out how it got messed up last time Dec 10 17:14:08 The immediate flash went fine, rebooted fine, uEnv.txt looked quite different, and now redoing steps to see if/when it modifies the uENV.txt Dec 10 17:14:17 Yep :o) Dec 10 17:15:53 doing "apt-get upgrade" now Dec 10 17:16:40 AHHH!! "_Enable the Robotics Cape device tree?" Yes/No - I certainly did say Yes at that time, I remember now... Dec 10 17:16:57 *DUH* Dec 10 17:17:21 Have been working with the Beaglebone Blue lately, so.... Dec 10 17:17:35 Thanks again for your help :) Dec 10 17:17:43 honestly that's not a question a random beaglebone black used should be getting though Dec 10 17:17:46 *user Dec 10 17:44:02 The question was accompanied by a nice explanation - If one just took the time to read it... Dec 10 17:44:10 ok Dec 10 22:34:46 hi Dec 10 22:35:09 hi Dec 10 23:48:37 php not working after => or -> Dec 11 00:20:37 ok Dec 11 01:05:53 Aw! Dec 11 01:07:41 I found a nice enclosure for the BBB on Tindie! Dec 11 01:07:56 $60.00! I am going to make one instead. Dec 11 01:08:02 Maybe. Dec 11 01:15:09 I have a .stl file for a BBBlue enclosure but not for the BBB. Point me there, please? Dec 11 01:20:09 https://www.tindie.com/products/TEMProducts/beaglebone-black-shell/ is the one I found on Tindie. I saw that Adafruit had a couple nice enclosures, too. Dec 11 01:20:36 Does anyone have a bonified BBB .stl file for an enclosure for the BBB? Dec 11 01:22:53 Dudes and Dude'ets, I found some .stl files on Thingiverse. Dec 11 02:19:05 ed* with simd: https://medium.com/@hdevalence/even-faster-edwards-curves-with-ifma-8b1e576a00e9 **** ENDING LOGGING AT Tue Dec 11 03:00:01 2018