**** BEGIN LOGGING AT Tue Apr 27 02:59:56 2021
Apr 27 07:41:47 <ds2> I am getting to really hate discourse
Apr 27 07:42:15 <ds2> $!#!@#!@#!@#!@$#@$@$ mails are all called Summary
Apr 27 10:38:34 <tgeek> Hi all, I just got my BeagleV about an hour ago. I can't wait to start playing with it after work.
Apr 27 10:38:56 <mru> looks like it'll make a nice hand warmer
Apr 27 11:48:43 <giuliomoro> @mru: it doesn't seem to heat up particularly at this point ... but I have the feeling it's heavily downclocked, though I cannot find a way for it to tell me it is so!
Apr 27 11:49:06 <mru> I haven't had a chance to fire it up yet
Apr 27 11:49:18 <mru> but that huge heatsink has to be there for a reason
Apr 27 11:49:29 <mru> it looks as expensive as the rest of the board
Apr 27 12:01:22 <giuliomoro> "precautionary" is what I read. maybe it's just me not being good enough at telling Fedora to speed up the CPU!
Apr 27 13:52:22 <yates> has the am3350 been eol'ed?
Apr 27 14:02:44 <zmatt> I'm not aware of part code AM3350 having ever existed
Apr 27 14:03:15 <zmatt> if you meant the AM3358 then no, why?
Apr 27 14:34:59 <humpelstilzchen[> tnew
Apr 27 15:37:55 <Indyenthusiast> Hello everyone
Apr 27 15:38:26 <Indyenthusiast> Newbie.. Here. Can someone point me to the beaglebone ai schematic?
Apr 27 15:53:05 <humpelstilzchen[> Indyenthusiast: how about https://github.com/beagleboard/beaglebone-ai
Apr 27 15:54:07 <Indyenthusiast> Thank you very much.
Apr 27 17:12:01 <Indyenthusiast> Hi All
Apr 27 17:12:01 <Indyenthusiast>  I have just started learning Embedded Linux. I ordered a Beaglebone ai and managed to bringup the os, Connect Keyboard, mouse to that. I ran a few linux commands on that. Now I want to know how to develop an embedded application, say for example Blinking an LED to start with. Can someone give me a quick guidance. I have Decent experience with
Apr 27 17:12:02 <Indyenthusiast> Microcontrollers without OS. So, I have working understanding of all the peripherals like I2C, UART, LCD etc... I would like to do the same on OS environment as a first run.
Apr 28 00:40:46 <mattb0000ne> ok I need to conquer this encoder tonight!
Apr 28 00:44:53 <buzzmarshall> hehe... good luck and play safe
Apr 28 00:45:18 <mattb0000ne> well i need some help with this mystery
Apr 28 00:45:23 <mattb0000ne> so I had this working
Apr 28 00:45:25 <mattb0000ne> now no beuno
Apr 28 00:45:36 <mattb0000ne> i have tested the sensor with an external PSU
Apr 28 00:45:43 <mattb0000ne> and oscilloscope
Apr 28 00:45:47 <mattb0000ne> looks good
Apr 28 00:46:05 <mattb0000ne> so I need to step down the voltage to 3.3V so I can go into the beagle
Apr 28 00:46:51 <mattb0000ne> that is where things go south
Apr 28 00:46:56 <mattb0000ne> wave form looks like crap
Apr 28 00:47:12 <mattb0000ne> i power both sides of the shifter with the pins on the BBB
Apr 28 00:47:31 <mattb0000ne> but I am not getting a 3V signal out of the low side of the shifter
Apr 28 00:47:36 <mattb0000ne> tried with two shifter boards
Apr 28 00:54:20 <buzzmarshall> ive never tried driving the high side of a shifter using the bbb's 5v rail as normally i use a separate power supply but make sure the ps wart for the bbb and the external ps are in the same 110v feed
Apr 28 00:55:27 <buzzmarshall> as well not all shifters are the same as some require a ground thru the shifter while others don't as they just require a shared ground between the bbb and the external device your trying to drive
Apr 28 00:59:21 <buzzmarshall> with the bbb's ive always been on the cautious side with how much its 5v rails can source so i just use a external suppy on the high of the level converters
Apr 28 01:02:08 <mattb0000ne> probably the way to go
Apr 28 01:02:17 <mattb0000ne> i have it sourcing the sensor and the shifter
Apr 28 01:02:28 <mattb0000ne> they are in mamps of draw but might be too much
Apr 28 01:19:17 <mattb0000ne> ok it works
Apr 28 01:19:22 <mattb0000ne> phew
Apr 28 01:23:31 <buzzmarshall> cool... i am glad to see you got it working
Apr 28 01:23:49 <mattb0000ne> it was your magic words
Apr 28 01:24:09 <mattb0000ne> up the confidence and competence of my hands
Apr 28 01:27:38 <buzzmarshall> haha... hey whatever works for ya... ive seen your posts and struggles the other nite and am just glad you got it going
Apr 28 01:28:09 <mattb0000ne> yeah the beagle can be frustrating at times
Apr 28 01:28:10 <mattb0000ne> for sure
Apr 28 01:30:17 <buzzmarshall> actually i find most sbc's can be at times as they all have their little quirks and if you don't spend enough time constantly on them its easy to have something wierd creep up on ya at times
Apr 28 01:30:49 <buzzmarshall> i jump around so much i am constantly getting caught in those types of traps
Apr 28 01:31:43 <buzzmarshall> usually its best to just settle on a particular board that interests you and just stay their till you get what you need it to do
Apr 28 01:31:53 <buzzmarshall> im bad for being sidetracked
Apr 28 01:31:55 <buzzmarshall> lol
Apr 28 01:32:07 <buzzmarshall> ive got the attention span of gnat
Apr 28 01:32:35 <buzzmarshall> always to many pots on the stove at any given time
Apr 28 01:48:11 <mattb0000ne> lol
Apr 28 01:48:14 <mattb0000ne> that is good advice
Apr 28 01:48:36 <mattb0000ne> i think once I am out of school
Apr 28 01:48:45 <mattb0000ne> I am just going to focus on the BBAI
Apr 28 01:48:48 <mattb0000ne> and master it
Apr 28 01:49:01 <mattb0000ne> seems like the future with the HP and AI capabilities
Apr 28 02:14:17 <mattb0000ne> zmatt: is this correct? https://pastebin.com/FDJ7c70i
Apr 28 02:50:32 <mattb0000ne> zmatt: it seems I have a syntax error somewhere
Apr 28 02:50:35 <mattb0000ne> not sure though
Apr 28 02:50:37 <mattb0000ne> updated file https://pastebin.com/7KRNxQcS
**** ENDING LOGGING AT Wed Apr 28 02:59:56 2021