**** BEGIN LOGGING AT Mon May 05 03:00:00 2014 **** BEGIN LOGGING AT Mon May 05 14:20:12 2014 May 05 16:56:12 hey May 05 17:06:00 panto hola ! i was working on the dt here https://github.com/anujdeshpande/PXF/blob/master/Device_Tree/devicetree.md and had a few q’s May 05 17:07:34 panto: i would have to include all the pins in the same way that emmc_rst is described here https://github.com/beagleboard/linux/blob/3.8/arch/arm/boot/dts/am335x-boneblack.dts ?? May 05 17:07:49 hi anujdeshpande May 05 17:08:33 hi May 05 17:09:31 you have to include all the changes that a DT overlay for beaglepilot would do in the base DTS May 05 17:09:55 you just copy/past the relevant parts from the overlay to the DTS May 05 17:10:06 it is designed so that it's possible to do just that May 05 17:11:19 panto and if there is a conflict, the one in the base DTS would be overwritten ? May 05 17:12:25 no May 05 17:12:39 the conflicting cape would not load - but May 05 17:12:50 only where the pinmux is conflicting May 05 17:13:11 if you go the base DTS route, you're missing the cape conflict resolution mechanism May 05 17:13:30 panto so in that case I’d make changes in the base dts ? nothing to do with the capes. May 05 17:14:55 yes May 05 17:15:25 panto am33xx.dtsi & am335x-bone-common.dtsi will need to be altered then ?? May 05 17:24:35 no, create a new DTS copying boneblack.dts May 05 17:24:52 in essence you're specifying your own board then May 05 17:25:06 it's not a beaglebone black, it's beagle pilot May 05 17:25:21 btw, I'm in the valley for two weeks May 05 17:25:30 is there anyone from the project around these parts? May 05 17:27:34 panto: craig elder should be. although he isnt around here on irc much. you could find him on the skype channel. he is from 3dr May 05 17:32:08 shoot him an email if he wants to meet for lunch or something some day May 05 17:32:35 panto: i’ll ask him on skype **** ENDING LOGGING AT Tue May 06 02:59:58 2014