**** BEGIN LOGGING AT Fri Feb 13 02:59:57 2009
Feb 13 07:38:57 <Danicasti_> Hi!
Feb 13 07:39:06 <Danicasti_> Buongiorno!
Feb 13 08:05:26 <voorstad> Hi Iurgi. Some months ago we discussed the implementation of OpenDNS and there was a lot of comment about easily bypassing the DNS.
Feb 13 08:05:50 <voorstad> I however came accross these settings in DD-WRT: http://www.dd-wrt.com/wiki/index.php/OpenDNS
Feb 13 08:06:07 <voorstad> Would this be something to implement in fon-ng?
Feb 13 10:17:26 <Decodecoding> Good morning
Feb 13 10:17:34 <iurgi> hi
Feb 13 10:17:52 <Decodecoding> May I ask something about the audiocli plugin?
Feb 13 10:19:30 <blogic> sur
Feb 13 10:19:32 <blogic> sure
Feb 13 10:22:53 <Decodecoding> Well. Recently, I purchased the USB soundcard somebody recomended in the Fon boards (the cheap one :-D 3D sound). Well, the thing is that when I plug it into my Fonera 2.0 with a non powered USB 2.0 port, the USB light does not turn on
Feb 13 10:23:58 <Decodecoding> The audiocli plugin is installed, but when it comes to play music stored in the hard disk, I get and Error 500 message.
Feb 13 10:24:08 <bmpeter> try to reboot
Feb 13 10:24:21 <blogic> is it a usb1.1 sound card ?
Feb 13 10:24:50 <Decodecoding> Umm, I suppose it is a 2.0 but I'm not 100% sure...
Feb 13 10:25:06 <Decodecoding> Maybe you know the model I'm talking about
Feb 13 10:25:47 <blogic> no, sorry
Feb 13 10:25:57 <Decodecoding> It is the 3 euro card sold everywhere in ebay or dealextreme with the green or blue case with the 3D SOUND printed on it
Feb 13 10:26:32 <blogic> ok
Feb 13 10:26:38 <bmpeter> i saw the error 500
Feb 13 10:26:50 <bmpeter> on my F2
Feb 13 10:27:10 <Decodecoding> I was wondering if you could tell me what should I see via ssh console to check wether the USB card is detected or not
Feb 13 10:27:14 <bmpeter> try to reintall audiocli
Feb 13 10:27:56 <Decodecoding> Ok, I'll reinstall the plugin. In fact, I removed it when I gave up trying to make it work.
Feb 13 10:29:15 <Decodecoding> What should I see in the ssh console to know the soundcard is detected by the Fonera?
Feb 13 10:30:19 <blogic> cat /proc/bus/usb/devices | grep snd
Feb 13 10:30:43 <Decodecoding> Ok. Thanks blogic. I'll try that and report.
Feb 13 10:30:47 <blogic> ok
Feb 13 10:31:36 <Decodecoding> By the way, the led light on the soundcard lights on, so I guess it get power from Fonera.
Feb 13 10:32:24 <blogic> yes
Feb 13 10:32:31 <blogic> if it is usb1.1 you need a hub
Feb 13 10:32:35 <bmpeter> maybe the power of F2 is not enought to soundcard too
Feb 13 10:32:48 <bmpeter> is it possible, no?
Feb 13 10:32:50 <blogic> no
Feb 13 10:32:57 <blogic> it will be a usb1.1 card
Feb 13 10:34:14 <Decodecoding> I'm using a USB 2.0 hub. The other device attached to the hub is a self powered usb 2.0 hard disk and it works like a charm with fonera 2.0
Feb 13 10:34:39 <blogic> good
Feb 13 10:35:03 <bmpeter> yes, its ok
Feb 13 10:35:09 <Decodecoding> linux formatted, of course, as you recomended
Feb 13 10:35:22 <blogic> ntfs is fixed aswell now
Feb 13 10:35:26 <blogic> we found the problem
Feb 13 10:35:38 <bmpeter> :(
Feb 13 10:35:52 <bmpeter> sorry :)
Feb 13 10:35:58 <blogic> well
Feb 13 10:36:05 <blogic> it is not released yet
Feb 13 10:36:19 <Decodecoding> Is the fix present in oktopussy 2 or should we wait till next release?
Feb 13 10:36:31 <bmpeter> op3?
Feb 13 10:36:33 <Decodecoding> Oh, sorry, you already answered-
Feb 13 10:36:51 <blogic> there will be a new image today
Feb 13 10:36:52 <blogic> :)
Feb 13 10:37:44 <bmpeter> friday 13 :)
Feb 13 10:39:05 <Decodecoding> Fantastic!
Feb 13 10:40:47 <bmpeter> todays release named LuckyCat :)
Feb 13 10:42:01 <Danicasti> friday 13 --> black cat :) !!!
Feb 13 10:42:47 <bmpeter> blackcat is negative :)
Feb 13 10:43:36 <Danicasti> eh eh!!!
Feb 13 10:43:54 <Danicasti> Pistillone is positive!!!
Feb 13 10:54:00 <RHarmsen> LuckyCat on Friday the 13th ... nice :D
Feb 13 10:54:07 <blogic> hehe
Feb 13 10:54:28 <bmpeter> :)
Feb 13 11:18:12 <Decodecoding> Any new plugin released today or will it be only a firmware update?
Feb 13 11:19:46 <blogic> hmmm
Feb 13 11:26:56 <Decodecoding> I don't mean that firmware upgrades are not important; they are.
Feb 13 11:30:12 <iurgi> hmmm
Feb 13 11:30:17 <iurgi> no new plugins, imho
Feb 13 11:30:26 <iurgi> but maybe some will be updated
Feb 13 11:32:48 <Decodecoding> Ok. So time to focus on firmware testing.
Feb 13 11:50:08 <barbon> hi
Feb 13 11:50:13 <barbon> why i cant download audiocli?
Feb 13 11:50:26 <barbon> my audio pen is arrived just now T_T
Feb 13 11:51:20 <barbon> found it
Feb 13 11:51:22 <Decodecoding> barbon, what model did you buy?
Feb 13 12:00:44 <chifong> blogic: smartftp is working now. thx
**** BEGIN LOGGING AT Fri Feb 13 12:02:41 2009
Feb 13 12:03:35 <blogic> chifong: :)
Feb 13 12:07:34 <chifong> have you started looking in to the fon2.0 that cannot display chinese name?
Feb 13 12:07:52 <blogic> yes
Feb 13 12:07:54 <blogic> working on it
Feb 13 12:08:57 <chifong> cool . thx
Feb 13 12:09:17 <chifong> i added two more 3g modem to the support list today as well
Feb 13 12:09:29 <blogic> ok
Feb 13 12:09:34 <blogic> which ones ?
Feb 13 12:09:42 <blogic> and where is the list ?
Feb 13 12:09:51 <chifong> on the wiki
Feb 13 12:09:56 <blogic> ah ok
Feb 13 12:10:41 <chifong> Huawei E270 and E172
Feb 13 12:11:38 <blogic> i cannot find the page ;(
Feb 13 12:12:01 <blogic> you have a link ?
Feb 13 12:12:10 <chifong> http://wiki.fon.com/wiki/3G_compatibility
Feb 13 12:12:16 <blogic> thx
Feb 13 12:12:29 <iurgi> good
Feb 13 12:28:01 <Decodecoding> Now that I read here about firmware updates, isn't Fonera 2 able to download and install itself the firmware updates o is it a feature planned for the commercial release?
Feb 13 12:28:21 <iurgi> it is able to
Feb 13 12:28:42 <iurgi> but till now, we prefer users to do full reflashes
Feb 13 12:28:50 <Decodecoding> I see.
Feb 13 12:28:54 <iurgi> so they don't use unnecessary space on upgrades
Feb 13 12:29:03 <iurgi> most current users are able to reflash it
Feb 13 12:29:14 <iurgi> future users might not be, so automatic upgrade will be necessary
Feb 13 12:29:25 <Decodecoding> Sure
Feb 13 12:30:52 <Decodecoding> I guess unattended autoupdating has a certain percentage of risk due to problems related with power suply loss....
Feb 13 12:32:40 <blogic> yes
Feb 13 13:11:52 <barbon> hello!
Feb 13 13:11:59 <barbon> tried audiocli
Feb 13 13:12:09 <barbon> and work great!
Feb 13 13:12:26 <barbon> bad quality sound (using headspeaker as speaker lol)
Feb 13 13:12:31 <barbon> but working :)
Feb 13 13:13:23 <barbon> some news?
Feb 13 13:20:14 <iurgi> not much
Feb 13 13:20:15 <iurgi> yet
Feb 13 13:26:04 <barbon> gg keep working ^^
Feb 13 13:30:13 <barbon> im still waiting bridge feature is that only thing that i need
Feb 13 13:30:20 <barbon> ç_ç
Feb 13 13:37:11 <iurgi> barbon: that will take long
Feb 13 13:37:12 <iurgi> sorry
Feb 13 13:37:13 <iurgi> :(
Feb 13 13:39:50 <barbon> how much years?
Feb 13 13:39:52 <barbon> XD
Feb 13 13:43:33 <Decodecoding> barbon, what soundcard are you using? I'm having some trouble with mine
Feb 13 13:43:50 <blogic> Decodecoding: so
Feb 13 13:43:52 <barbon> ok wait 1 sec
Feb 13 13:43:54 <blogic> let see
Feb 13 13:44:00 <blogic> you have a hub ?
Feb 13 13:44:07 <Decodecoding> Yes, 2.0
Feb 13 13:44:10 <barbon> hey
Feb 13 13:44:10 <blogic> ok
Feb 13 13:44:14 <barbon> try to restart
Feb 13 13:44:16 <barbon> fonera
Feb 13 13:44:19 <blogic> and you have the sound card attached ?
Feb 13 13:44:20 <barbon> with usb card
Feb 13 13:44:23 <barbon> attached
Feb 13 13:44:28 <Decodecoding> I did but nothing happened
Feb 13 13:44:34 <blogic> it never does
Feb 13 13:44:36 <blogic> so
Feb 13 13:44:45 <blogic> cat /prco/bus/usb/devices | grep snd
Feb 13 13:44:50 <barbon> it tDecodcoding it turn on?
Feb 13 13:44:55 <blogic> what does that command give as output
Feb 13 13:44:59 <barbon> led are lighting?
Feb 13 13:45:21 <Decodecoding> I can't do it now. I'll do it tonight.  Barbon: the led light does not light.
Feb 13 13:46:09 <Decodecoding> I wonder if this soundcard model is not compatible...
Feb 13 13:46:59 <Decodecoding> I don't care too much as long as I have my hard disk workink properly for future plugins coming...
Feb 13 13:55:33 <barbon> try to connect audio card to fonera
Feb 13 13:55:35 <barbon> directy
Feb 13 13:55:37 <barbon> without hub
Feb 13 13:57:13 <barbon> Decodecoding try to do this
Feb 13 13:57:30 <Decodecoding> also did it  :-(
Feb 13 13:57:43 <Decodecoding> with no success either
Feb 13 13:58:16 <Decodecoding> Let's hope a new firm update can help solving it...
Feb 13 13:58:21 <barbon> mmm
Feb 13 13:58:25 <barbon> what firmware you got?
Feb 13 13:58:27 <barbon> the latest?
Feb 13 13:58:34 <Decodecoding> Oktupusy 2
Feb 13 13:59:10 <barbon> i have used  sound audiocontroller lead 3d sound 5.1 tide
Feb 13 14:00:24 <barbon> what is your audiocard?
Feb 13 14:01:27 <Decodecoding> It has no brand, just a 3D SOUND banner printed on it. Here it is: http://www.dealextreme.com/details.dx/sku.9723
Feb 13 14:07:47 <barbon> is similiar to mine except for colour
Feb 13 14:08:12 <barbon> mine is black
Feb 13 14:08:25 <Decodecoding> Actually, mine is green  :-)
Feb 13 14:08:33 <barbon> and when i attach it to fonera both led turn on
Feb 13 14:09:04 <Decodecoding> When I plug it in, there's a red ligh on the usb card that lights on, but not the fonera usb led
Feb 13 14:09:15 <barbon> ah :/
Feb 13 14:09:32 <itona> On the Backside: HY554 or HY552?
Feb 13 14:10:03 <Decodecoding> Umm, itona, don't have it here now, but guess you are suggesting a compatibility issue
Feb 13 14:10:05 <Decodecoding> ?
Feb 13 14:10:23 <itona> I've got both of them, both work but HY552 is lots better in matters of sound quality.
Feb 13 14:10:32 <Decodecoding> aha.
Feb 13 14:11:02 <itona> Both are blue ones about 5USS incl shipping from Hong-Kong/ebay
Feb 13 14:11:11 <Decodecoding> Is there a green led on the card that should also turn on when working properly?
Feb 13 14:11:42 <barbon> mine is HY552
Feb 13 14:12:22 <itona> while playing it blinks...
Feb 13 14:12:46 <Decodecoding> You mean two leds, don't you?
Feb 13 14:14:09 <Decodecoding> Might be a hardware malfunction on my side. If so, I don't care too much. 2.86 € to trash...
Feb 13 14:17:05 <barbon> Hong kong things suck
Feb 13 14:17:07 <barbon> :/
Feb 13 14:17:19 <barbon> try to buy thing in your zone
Feb 13 14:17:53 <kazwo> what is the printer addon?
Feb 13 14:18:23 <blogic> kazwo:  ?
Feb 13 14:18:41 <kazwo>  printer_1.0_fonera2_fon.tar.gz 13-feb-2009 13:44   10K
Feb 13 14:19:08 <blogic> ^_^
Feb 13 14:19:19 <kazwo> :D
Feb 13 14:19:21 <blogic> nothing special sorry
Feb 13 14:19:42 <barbon> lol
Feb 13 14:20:43 <barbon> but these plugin are not included in firmware?
Feb 13 14:23:36 <barbon> what are these plugin
Feb 13 14:25:19 <Decodecoding> Yes, seems like my souncard is a piece of shit
Feb 13 14:25:27 <blogic> no
Feb 13 14:25:47 <blogic> it iwll work i am sure
Feb 13 14:26:38 <blogic> playing file : /tmp /tmp/run/mountd/sda1/a.mp3
Feb 13 14:26:40 <blogic> ?!?
Feb 13 14:28:00 <blogic> grml
Feb 13 14:28:25 <blogic> pablo_bz: is the stuff in svn usable ?
Feb 13 14:30:00 <blogic> Decodecoding: the plugin is broken i think
Feb 13 14:30:09 <blogic> i do not get sound either
Feb 13 14:30:13 <blogic> gimme a sec
Feb 13 14:30:21 <Decodecoding> no problem
Feb 13 14:42:04 <barbon> blogic>	gimme a sec lol
Feb 13 14:48:29 <barbon> 1 second is already passed
Feb 13 14:48:32 <barbon> XD
Feb 13 14:48:46 <kazwo> i think he is stucked in a timehole
Feb 13 14:50:25 <barbon> lol
Feb 13 14:50:32 <barbon> los in time
Feb 13 14:50:34 <barbon> lost*
Feb 13 14:50:37 <barbon> o.o
Feb 13 14:57:18 <Xion>  /msg NickServ identify salame
Feb 13 14:57:21 <Xion> ._.
Feb 13 14:57:27 <Xion> asd
Feb 13 14:57:54 <Xion> [ERROR]	SyntaxError: unterminated regular expression literal
Feb 13 14:57:56 <blogic> ;)
Feb 13 14:57:57 <Xion> what is this
Feb 13 14:57:59 <Xion> XD
Feb 13 14:58:07 <blogic> ?
Feb 13 14:58:09 <CyrusFF> someone in this channel should change his ident password
Feb 13 14:58:10 <CyrusFF> :-P
Feb 13 14:58:18 <Xion> is not my pass
Feb 13 14:58:20 <Xion> is incorrect
Feb 13 14:58:22 <blogic> i think so aswall
Feb 13 14:58:24 <blogic> ah ok
Feb 13 14:58:51 <Xion> because i use this nick in other serverx
Feb 13 19:18:00 <kazwo> someone watch the bundesvision song contest?
Feb 13 19:18:03 <kazwo> on tv
Feb 13 19:18:31 <xMff> I avoid pain whenever it's possible
Feb 13 19:19:25 <kazwo> :D
Feb 13 19:22:01 <kazwo> i think bavaria wins
Feb 13 19:23:17 <xMff> hmpf... again another country wins ;)
Feb 13 19:24:18 <CyrusFF> fortunately i don't have a tv
Feb 13 19:24:49 <kazwo> schon GEZahlt?
Feb 13 19:25:11 <xMff> nö, tv wegGEZaubert
Feb 13 19:25:31 <xMff> :P
Feb 13 19:26:42 <CyrusFF> Tvs are overrated
Feb 13 19:27:43 <blogic> TV ?
Feb 13 19:28:01 <blogic> ah the thing you turn on when the world collapses
Feb 13 19:28:03 <blogic> :)
Feb 13 19:29:35 <CyrusFF> sure I mean we are on the next level, we have the internet, we don't need anyone else to collect the useless stuff we are watching :-P
Feb 13 19:30:07 <kazwo> hmmm has the fon2 enough cpu power to stream ~4 mbit mpeg dvb-t?
Feb 13 19:30:57 <xMff> fon should come up with an usb-connected co-processor or so :P
Feb 13 19:31:36 <kazwo> and usb grafic board :D
Feb 13 19:31:43 <kazwo> graphic
Feb 13 19:32:03 <nbd> xMff: yeah right, because usb burns virtually no cpu cycles ;)
Feb 13 19:32:12 <xMff> nbd: ;)
Feb 13 19:34:24 <CyrusFF> some company, i think it was fujitsu produce some external graphic cards for notebook users and gamers, though its of course not USB ;-)
Feb 13 19:35:29 <CyrusFF> but they only work with their nbs because they use some proprietary bus
Feb 13 19:48:04 <kazwo> i think the fon2 should support this usb device: http://www.iwantoneofthose.com/office-toys/usb-hamster-wheel/index.html
Feb 13 19:48:15 <kazwo> its perfect to show the cpu load
Feb 13 19:48:46 <kazwo> or traffic
Feb 13 21:04:02 <kazwo> http://feedproxy.google.com/~r/failblog/~3/x5kYcRmVDTw/
Feb 13 21:07:10 <kazwo> http://de.engadget.com/2009/02/13/huawei-i-mo-hsdpa-modem-wifi-router-und-festplatte-fur-die-hos/
Feb 13 21:07:39 <kazwo> english: http://feeds.engadget.com/~r/weblogsinc/engadget/~3/FaWQzLyEf0Q/
**** ENDING LOGGING AT Sat Feb 14 02:59:57 2009