**** BEGIN LOGGING AT Thu Mar 19 02:59:57 2009 Mar 19 07:32:22 Hi! Mar 19 08:03:37 hi Mar 19 08:03:44 what port did you use for torrent? Mar 19 08:04:06 because i added a torrent yesterday, and it's still waiting Mar 19 08:07:42 i can only download one torrent in the same time? Mar 19 08:25:05 2 Mar 19 08:25:08 2 torrents Mar 19 08:25:24 i uploaded 2 Mar 19 08:26:10 when i press play play Mar 19 08:26:15 the other pauses Mar 19 08:26:21 -play Mar 19 08:43:50 hi Mar 19 08:44:22 will there any update for support newer umtsd device? Mar 19 08:44:49 i tired E169G and K3715, both with no luck. Mar 19 08:44:51 thx Mar 19 08:53:38 chifong: send me the devices and i will make them work Mar 19 08:58:00 i'm sorry, but we only hv some demo unit, so cannot send to you. Mar 19 08:59:11 ok Mar 19 08:59:19 what exactly id the error symptom ? Mar 19 08:59:52 i just show dialing in the web interface. Mar 19 08:59:59 *it just show Mar 19 09:00:33 ok Mar 19 09:02:07 but i cannot see it is dialing from reading from the logread Mar 19 09:02:17 ok Mar 19 09:02:33 there are ttyUSBX nodes in /dev/ ? Mar 19 09:20:16 sorry, i got disconnected. Mar 19 09:22:18 what else should i do to test? Mar 19 09:25:33 i dun know if my message got delivery. just in case , i send it again. Mar 19 09:25:42 hi Blogic? Mar 19 09:25:47 SkyNETbbs: Mar 19 09:25:54 chifong: hmmm Mar 19 09:25:54 it shows ttyUSB0 ttyUSB1 and ttyUSB2 Mar 19 09:25:57 ah ok Mar 19 09:25:58 3? Mar 19 09:26:00 ok ok Mar 19 09:26:02 no Mar 19 09:26:04 this is the reason then Mar 19 09:26:09 could you add "option" 3G support? the problem is they are detected as "storage mode" devices instead of serial modems Mar 19 09:26:10 0,1,2 Mar 19 09:26:20 a solution may be found on : http://wiki.openwrt.org/OpenWrtDocs/Kamikaze3G -> using usb_modeswitch? Mar 19 09:26:27 SkyNETbbs: 1.) short sentences Mar 19 09:26:35 2) think what you want to ask before asking Mar 19 09:26:50 3) reread it, check grammar and think about if people will know what you are asking Mar 19 09:26:57 4) try to use as little word as possbile Mar 19 09:27:06 i am always lost in your monologues Mar 19 09:27:11 and never know what you want Mar 19 09:27:20 could you add "option" 3G support? ? what ? Mar 19 09:27:31 the problem is they are detected as "storage mode" devices instead of serial modems ? what ? define "They" Mar 19 09:27:36 1) Currently Fonera 2.0 only supports specific huawei modems Mar 19 09:27:56 2) Option modems are not useable with current Fon 2.0 3G scripts Mar 19 09:28:07 3) they are detected as storage devices Mar 19 09:28:11 4) known issue -> http://wiki.openwrt.org/OpenWrtDocs/Kamikaze3G Mar 19 09:28:16 ah ok Mar 19 09:28:25 5) solution exists... Mar 19 09:28:27 Otion as in the vendor not the "config" option Mar 19 09:28:29 yes Mar 19 09:28:33 yes Mar 19 09:28:34 the solution stinks, but ok Mar 19 09:28:50 SkyNETbbs: what is the exact part number ? so i can order a "option" 3g dongle on ebay Mar 19 09:28:55 there is a 50% change that your telco provider will provide you with an "option" 3G modem... and 50% that it's a huawei Mar 19 09:29:04 SkyNETbbs: no Mar 19 09:29:24 SkyNETbbs: in germany and UK you have a 90% chance of a huawei, but ok Mar 19 09:29:30 we can add option support, no problem Mar 19 09:29:36 SkyNETbbs: what is the part number ? Mar 19 09:29:40 http://wiki.fon.com/wiki/3G_compatibility : try the T-mobile Web'n Walker Mar 19 09:30:02 or the Vodaphone Global Surfer Mar 19 09:30:15 I've even put pictures on http://wiki.fon.com/wiki/3G-Option Mar 19 09:30:36 i will get this one --> " T-mobile Web'n Walker" Mar 19 09:30:38 thx Mar 19 09:30:41 I have 3 people with a fonera 2.0 that have an option modem : http://wiki.fon.com/wiki/Image:F2-3G-Option-GIO225-2.jpg Mar 19 09:30:48 okay thnx!!! Mar 19 09:31:10 http://cgi.ebay.de/Web-n-Walk-Stick-von-T-Mobile-ohne-SIM_W0QQitemZ330314875024QQcmdZViewItemQQptZLH_DefaultDomain_77?hash=item330314875024&_trksid=p3286.c0.m14&_trkparms=72%3A1121|66%3A2|65%3A12|39%3A1|240%3A1318 Mar 19 09:31:14 this one ? Mar 19 09:33:10 Yes Mar 19 09:33:12 very popular ones Mar 19 09:33:27 ok Mar 19 09:33:30 i will order one Mar 19 09:33:35 thanks Mar 19 09:33:37 is it possible that you can fix the e169g and k3715 problem without having one of them? Mar 19 09:33:41 also, with the neorouter thing Mar 19 09:33:48 chifong: yes Mar 19 09:33:57 chifong: i will send yu a test image Mar 19 09:34:07 if you have ttyUSB0,1,2 then this will be the reason Mar 19 09:34:16 the E220 normally has only ttyUSB0,1 Mar 19 09:34:31 chifong: can you tell me the vid/pid of both devces ? Mar 19 09:34:44 cat /proc/bus/usb/devices will show this info Mar 19 09:34:55 chifong: in this case we can add a uci option to make it work Mar 19 09:36:43 Vendor=12d1 ProdID=1001 Mar 19 09:37:04 this is for e169G Mar 19 09:37:15 the Huawei E169 comes with a micro sd card reader ... which might cause it to be detected as such by default... Eric Levine seems to have got it to work and documented it on the mailinglist? Mar 19 09:37:39 E169 works Mar 19 09:37:43 i tested it last night Mar 19 09:37:55 e169g i have not tested Mar 19 09:38:08 SkyNETbbs: E169 != e169g Mar 19 09:38:11 chifong: thx Mar 19 09:40:06 i dun have a k3715 in my hand , i will try find the vid and pid by trm Mar 19 09:42:21 how long would u take to fix this and create the image for test? Mar 19 09:43:04 chifong: 24hours Mar 19 09:43:09 cool Mar 19 09:43:13 chifong: as soon as i get the 2nd pid/vid Mar 19 09:43:29 chifong: the idea is to already have the first update ready, when users receive their fon20 :) Mar 19 09:46:02 chifong: do oyu have a developer image on your fon20 ? Mar 19 09:46:27 if thi sis the case, you can even fix this problem by hand i think Mar 19 09:46:34 cat /var/state/umtsd Mar 19 09:48:07 u want me to paste the output? Mar 19 09:48:11 yes Mar 19 09:48:13 please Mar 19 09:48:38 umtsd.umtsd.attached=1 Mar 19 09:48:54 that is all ? Mar 19 09:48:57 ??! Mar 19 09:48:59 umtsd.umtsd.device=option12D11001 Mar 19 09:49:09 ah ok :) Mar 19 09:49:19 --> option12D11001 Mar 19 09:49:31 this line is the "key id" of your dongle Mar 19 09:49:33 now Mar 19 09:49:37 do u still need the rest of the output? Mar 19 09:49:41 no Mar 19 09:49:48 now try this please .... Mar 19 09:49:48 ai... ok Mar 19 09:49:53 ok Mar 19 09:49:56 edit /etc/config/umtsd Mar 19 09:50:05 inside there is already a section for e220 Mar 19 09:50:21 duplicate this section and rename it to option12D11001 Mar 19 09:50:38 then try to figure out whihc ttyUSB nodes are data and which are command Mar 19 09:50:46 what port did you use for torrent? Mar 19 09:50:55 it must be a combination of ttyUSB0,1,2 Mar 19 09:51:05 i would assume ttyusb0 and ttyusb2 Mar 19 09:51:19 maybe in google you find extrea info Mar 19 09:51:21 Danicasti: ctorrent Mar 19 09:51:30 kazwo: enhanced-ctorrent Mar 19 09:51:32 :) Mar 19 09:52:07 i changed the config, now wt i need to do? Mar 19 09:52:46 http://fonosfera.org/pipermail/development/2009-January/000212.html Mar 19 09:52:51 he uses ttyusb0 Mar 19 09:52:53 hmm Mar 19 09:53:03 now connect your modem and check if you go online :) Mar 19 09:53:46 ok, cmd=ttyUSB0 Mar 19 09:53:51 datattyUSB2 Mar 19 09:53:54 try that please Mar 19 09:54:30 kazwo: Thanks! Mar 19 09:57:17 no luck Mar 19 09:57:36 chifong: no, data=ttyUSB0 and cmd=ttyUSB2 ? Mar 19 09:58:52 chifong: ok, data is definatley ttyUSB0 Mar 19 09:59:01 the question is, where is the command port Mar 19 09:59:09 try ttyUSB2 for this please Mar 19 10:08:51 blogic: you had a question regarding neorouter? Mar 19 10:09:14 blogic: I have not received any feedback from neorouter about the recommendations to replace openssl library :( Mar 19 10:10:14 both dun work Mar 19 10:10:21 :( Mar 19 10:10:27 good morning Mar 19 10:11:02 SkyNETbbs: so, this is just a vpn to get into home ? Mar 19 10:11:08 i got some binaries from them Mar 19 10:11:14 did not test it as it is binary Mar 19 10:11:25 i personally do not run apps that i do not have the source for sorry Mar 19 10:15:35 hey :) Mar 19 10:15:46 it's a P2P vpn where you host yourself the central vpn server (<-> hamachi.cc) Mar 19 10:15:54 what is loading phase of fonera torrent? Mar 19 10:16:44 blogic:sorry, i have to go ,i will try it again tonite . Mar 19 10:16:45 sorry Mar 19 10:17:37 ok Mar 19 10:17:40 no problem Mar 19 10:17:45 hey blogic Mar 19 10:17:57 Barbon: it means it is trying to load the file Mar 19 10:18:10 it stucked here Mar 19 10:18:10 Barbon: send me the .torrent john.crispin@fon.com Mar 19 10:18:16 k Mar 19 10:18:30 i cant send here? Mar 19 10:19:01 accept Mar 19 10:19:51 john.crispin@fon.com Mar 19 10:19:53 email Mar 19 10:19:53 blogic : http://www.neorouter.com/wiki/index.php/NeoRouterWiki:GettingStarted with "how it works"...I'll email them to check if the source is (open) or not... can't find any links to it :-) Mar 19 10:20:18 blogic chek your email :) Mar 19 10:20:23 SkyNETbbs: see, tere is only i thing not src on the fonera and it is the fonsmcd Mar 19 10:20:40 SkyNETbbs: if it is closed source, they will have to solve the problems themselves sorry Mar 19 10:20:51 SkyNETbbs: or ask iurgi, but i guess he will say the same Mar 19 10:21:01 SkyNETbbs: if it is FOSS then we can help of course Mar 19 10:21:21 SkyNETbbs: also, l2gvpn will get a bit of attention again from me soon Mar 19 10:21:37 SkyNETbbs: we are only missing crypto and some goodies to make it more stable Mar 19 10:21:48 SkyNETbbs: then it will be enough for a first ipv4 only version Mar 19 10:21:57 SkyNETbbs: and my code is only 24k big :) Mar 19 10:23:22 SkyNETbbs: see, we are the first really opensource router that is sold and properly supported imho Mar 19 10:23:30 and i would like to keep it Open Mar 19 10:24:52 like www.myopenrouter.org ? :-) Mar 19 10:25:37 Is this fonsmcd "FON Status Manager Client Daemon" a way to hide activity on the FON_free_internet side of La Fonera? Mar 19 10:25:42 SkyNETbbs: i do not see a dev team behind that Mar 19 10:26:14 fonsmcd just does the heartbeat, that is all Mar 19 10:26:21 so we can show on the map if you are only Mar 19 10:26:24 so we can show on the map if you are online Mar 19 10:26:34 also, we can push hotfixes and registration over it Mar 19 10:26:36 that is all Mar 19 10:27:57 Barbon: it does not find any peers with the file online Mar 19 10:28:30 Barbon: that is why Mar 19 10:29:18 ah okay... because I only found an uci command to find out "how many" are connected to the Fon_free_internet signal... with wlanconfig ath0 list I get their mac adresses... not their ip/hostnames Mar 19 10:29:40 On a fon classic they were listed in /tmp/dhcp.leases i believe... in fon-ng they are not? Mar 19 10:30:05 devteam myopenrouter : http://www.myopenrouter.com/profile/3/ Mar 19 10:31:32 SkyNETbbs: the info is now in /sys/ Mar 19 10:32:45 thnx i'll check this evening :-) Mar 19 10:35:39 ahhh Mar 19 10:35:43 blogic thank you :) Mar 19 10:35:49 so i try to change torrent? Mar 19 10:38:17 Barbon: try a different torrent for this app Mar 19 10:38:27 Barbon: in the next version we will expose this info better Mar 19 10:56:24 re Mar 19 10:57:36 wb Mar 19 11:13:11 blogic no one torrent is working Mar 19 11:13:17 maybe can be a firewall problem? Mar 19 11:13:29 what port use torrent fonera? :/ Mar 19 11:13:46 Barbon, mine is working properly Mar 19 11:14:17 Decodecoding: hi Mar 19 11:14:23 Hi all Mar 19 11:14:23 Decodecoding: i am working on flickr atm Mar 19 11:14:27 Cool Mar 19 11:14:51 The only thing that worries me is a couple crashes my fonera suffered Mar 19 11:14:56 decodecoding try to send me a working torrent Mar 19 11:15:22 How can I send it to you? Mar 19 11:16:30 send me a torrent that you are using Mar 19 11:17:07 Yeah, I know, but how? email? Mar 19 11:18:01 Barbon: http://cdimage.debian.org/debian-cd/5.0.0/i386/bt-cd/debian-500-i386-CD-1.iso.torrent Mar 19 11:18:06 Barbon: that 1 works Mar 19 11:18:33 I get mine from PB Mar 19 11:19:59 Decodecoding: yeah PB works fine Mar 19 11:22:14 hi Mar 19 11:22:20 jemand da der deutsch spricht? Mar 19 11:22:38 ja Mar 19 11:22:45 Decodecoding: i sent you a message Mar 19 11:22:46 ne frage zur lafonera 2 Mar 19 11:22:50 DMLazybone: ja Mar 19 11:23:08 welches Dateisystem unterstüzt sie am USB Port für Daten? Mar 19 11:23:20 fat, vfat, ntfs, etx2, etx3 Mar 19 11:23:26 fat32 auch? Mar 19 11:23:28 ja Mar 19 11:23:37 k einen moment Mar 19 11:23:38 ich teste Mar 19 11:23:46 vfat == fat12/16/32 + lange dateinamen Mar 19 11:24:13 ah k Mar 19 11:24:23 also habe einen 2gb usb stick fat32 angesteckt Mar 19 11:24:39 geht die usb lampe an ? Mar 19 11:24:40 ah den erkennt er Mar 19 11:24:44 ok Mar 19 11:24:52 usb1.1 geht nur mit nem hub Mar 19 11:25:00 viele alte sticks sind usb1.1 Mar 19 11:25:09 usb2.0 geht auch direkt Mar 19 11:25:28 jup geht Mar 19 11:25:44 so nur Drucker geht nicht Mar 19 11:25:48 ok Mar 19 11:25:52 welcher drucker ist es ? Mar 19 11:26:37 hplaserhet 1200 series Mar 19 11:26:47 ah ok Mar 19 11:26:56 hp ist "special" Mar 19 11:26:59 HP Laserjet Mar 19 11:27:07 hp macht drucker anders als der rest der welt imho Mar 19 11:27:13 deshalb gehen die leider ncith Mar 19 11:27:24 ich werde bald mal so ein teil kaufen und gucken warum Mar 19 11:27:42 Brother HL-2030 sollte der gehen? Mar 19 11:28:10 ich gleube der ging, ja Mar 19 11:29:06 hmm k Mar 19 11:35:32 mal eine andere frage blogic Mar 19 11:35:38 kennst du dich mit webdav aus? Mar 19 11:36:14 jein Mar 19 11:36:27 webdav aufm fon20 ? Mar 19 11:36:40 webdav mit apache auf ubuntu Mar 19 11:36:48 und als client nen win xp sp2 Mar 19 11:37:10 ah Mar 19 11:37:12 sorry Mar 19 11:37:18 kein plan Mar 19 11:37:27 ok Mar 19 11:37:35 kennst du eine andere alternative vll? Mar 19 11:37:53 du fragst den falschen Mar 19 11:38:05 ich arbeite nur mit ner console, ssh, vi und gcc Mar 19 11:38:17 :) Mar 19 11:38:17 k Mar 19 11:38:25 ;) Mar 19 11:38:42 ich habe seit jahren kein windows oder grafischen dateimanager angefasst Mar 19 11:51:30 blogic is all to 0% Mar 19 11:51:42 in loading phase Mar 19 11:51:44 ._. Mar 19 11:53:48 Barbon: hmm Mar 19 11:53:55 Barbon: maybe your provider blocks the port Mar 19 11:54:03 ok, we will make the port configurable Mar 19 11:56:41 yea i think is a port problem Mar 19 11:57:49 Barbon: ok Mar 19 13:18:22 hi rwhitby Mar 19 13:18:52 did your moded fon2 worked well? Mar 19 13:21:49 Barbon! Mar 19 13:23:56 inouk: yes, I am connecting through it from a hotel in Japan right now, and using it to sync my Treo650 via bluetooth. Mar 19 13:24:35 nice Mar 19 13:24:38 :) Mar 19 13:30:34 rwhitby: Post a wiki! Mar 19 13:35:00 http://www.nslu2-linux.org/gallery/fonera2-hacks Mar 19 13:37:28 nice Mar 19 13:39:03 The USB chipset of F2 is to able to 4 port :) Mar 19 13:39:42 I NEED A DATASHEET!!!! Mar 19 13:44:11 Danicasti: they are not available on the PCB - I looked already. Mar 19 13:44:23 The datasheet for the chip is freely available. Mar 19 13:44:48 you would need to wire up to the pins, and add the passive components for the D+ and D- lines Mar 19 13:45:38 rwhitby es... Mar 19 13:45:43 yes Mar 19 14:06:26 wohooo! got my tenth alien visitor on my fonspot :) Mar 19 15:00:38 hi to someone you work correctly dlmanager?, ami gives me this error when entering the download URL: Unable to download file 'http://www.megaupload.com/?d=IAUL3JJK': Received a webpage instead of a file. The file might have been deleted or you need a valid download account to receive this file. (I use premium account). Mar 19 15:03:26 fonero: works fine Mar 19 15:03:34 this error is because you don't have a preimum account Mar 19 15:03:39 or it's not well configured Mar 19 15:03:55 or the file has been deleted Mar 19 15:04:02 I'll tell you in a sec Mar 19 15:04:19 (opening thelink) Mar 19 15:04:28 the file is correct Mar 19 15:04:38 so you don't have valid MegaUpload credentials Mar 19 15:09:38 The premium account, correct credentials :( Mar 19 15:10:00 fonero: this same link works for me Mar 19 15:10:33 ahhhhh Mar 19 15:10:35 I know Mar 19 15:10:36 :) Mar 19 15:10:44 int eh megaupload page Mar 19 15:10:52 you need to go to your account settings Mar 19 15:11:06 there's a "checkbox" that says "Direct downloads" Mar 19 15:11:10 you need to mark it Mar 19 15:11:24 if not, you never get the file directly but a web page with a download button Mar 19 15:11:30 do you have this checkbox marked? Mar 19 15:11:52 in megaupload.com Mar 19 15:11:55 not in the fonera Mar 19 15:12:00 can you check that? Mar 19 15:14:50 thank you very much, try later :) Mar 19 15:20:31 ok, problem solved Mar 19 15:20:40 good Mar 19 15:20:42 :) Mar 19 15:20:55 thanks Mar 19 15:22:30 another problem Mar 19 15:25:01 fonbackups only works if there is no cable internet in the Fonera Mar 19 15:32:47 Ã§?? Mar 19 15:32:49 no Mar 19 15:32:55 it works fine heer Mar 19 15:46:41 this is the fault, removing the internet cable to the Fonera the program works correctly: http://img9.imageshack.us/my.php?image=dibujohh.png Mar 19 15:57:05 heylÃ Mar 19 15:57:12 i have tested some feature Mar 19 15:57:20 download manager work ok Mar 19 15:57:47 in youtube uploader dont work, i cant see my video file that i have put in youtube folder Mar 19 15:57:59 torrent dont work (port blocking) Mar 19 15:58:04 :) Mar 19 15:59:17 somesone know what port is torrent fonera using? Mar 19 16:06:13 hi barbon: ssh processes by looking: ctorrent/200 I do not exact remember the numbers but can not be the port... Mar 19 16:06:49 :/ Mar 19 16:07:33 barbon: the default torrent port i assume Mar 19 16:07:35 you can take a look? Mar 19 16:07:38 yea Mar 19 16:07:50 i try to unlock it on the other router Mar 19 16:08:04 barbon: no Mar 19 16:08:08 your isp is blocking it Mar 19 16:08:10 not your router Mar 19 16:08:33 is not the isp, torrent work fine if i am using the pc Mar 19 16:08:36 ^^ Mar 19 16:09:40 yes, on the toreent port ? :) Mar 19 16:11:11 using 1755 and i have unlocked it on fonera and the main Mar 19 16:11:43 but i dotn know what is the port that using fonera Mar 19 16:11:44 :P Mar 19 16:13:24 "By default, CTorrent starts at 2706 and searches for an available port in decreasing order until it finds one or exhausts all ports down through 2106." Mar 19 16:13:48 xMff: ok Mar 19 16:13:52 xMff: :) Mar 19 16:14:00 first google result when searching for "ctorrent default port" :P Mar 19 16:14:04 haha Mar 19 16:14:20 i would have used netstat :) Mar 19 16:15:09 barbon: 2106-2706 Mar 19 16:15:24 ok i try to open these :D Mar 19 16:15:31 xMff: i suppose we shoul dopen tose ports on the fonera aswell Mar 19 16:15:43 would make sense, yes Mar 19 16:15:49 i think so awell Mar 19 16:15:59 i will check if i can pass ctorrent any params for this Mar 19 16:16:05 you can Mar 19 16:16:06 i do not want to open 600 ports :) Mar 19 16:16:08 ok Mar 19 16:16:10 cool Mar 19 16:16:15 -p port Listen port Mar 19 16:16:20 ah cool Mar 19 16:17:00 http://www.rahul.net/dholmes/ctorrent/userguide.html <--- listing of switches Mar 19 16:19:03 oh hmm Mar 19 16:19:11 it's for "Enhanced CTorrent" Mar 19 16:19:18 so maybe it does not apply to CTorrent Mar 19 16:19:19 we use enhanced Mar 19 16:19:22 ah ok Mar 19 16:19:23 :) Mar 19 16:19:27 Server Name External Port Start External Port End Protocol Internal Port Start Internal Port End Server IP Address Remove Mar 19 16:19:28 Torrent Fonera 2106 2106 TCP/UDP 2106 2106 192.168.10.1 Mar 19 16:19:30 Torrent Fonera 2706 2706 TCP/UDP 2706 2706 192.168.10.1 Mar 19 16:19:33 is ok the config? Mar 19 16:19:40 yes Mar 19 16:19:42 looks good Mar 19 16:19:46 ok i try Mar 19 16:22:02 ok i see if working Mar 19 16:22:06 i have put a file Mar 19 16:25:22 loading 0% Mar 19 16:25:25 .-. Mar 19 16:25:28 barbon: ok Mar 19 16:26:24 pen usb is flascing Mar 19 16:26:32 so it creating files and folder Mar 19 16:30:27 Nome Stato VelocitÂˆ di DL VelocitÂˆ in UL Volume Dimensione Azione Mar 19 16:30:29 1 Office.2007.ita.enterprise.iso... Caricamento - 0% 5.18 KB 0.00 B 0.00 B 275.00 MB Mar 19 16:30:33 is downloading!!!! Mar 19 16:30:36 :) Mar 19 16:30:47 barbon: \o/ Mar 19 16:30:57 \(^o^)/ Mar 19 16:31:01 juhu Mar 19 16:31:50