**** BEGIN LOGGING AT Thu Oct 15 02:59:56 2009 Oct 15 06:58:25 MVXA: Do you know which "wrong" part of the memory was deleted? Oct 15 06:58:33 MVXA: Did you try booting into failsafe mode? Oct 15 08:00:45 Buongiorno! Oct 15 08:06:19 morning Oct 15 08:18:17 morning Oct 15 08:24:56 hi Oct 15 09:32:52 Good morning Oct 15 09:33:13 aloha Oct 15 09:33:33 Alpha Oct 15 09:33:40 Sorry t9 bastard Oct 15 09:34:02 you have t9 in xour irc client ? Oct 15 09:35:29 hehe Oct 15 10:58:11 blogic, do you know why my HY554 'USB 3D SOUND' is not recognized anymore? Oct 15 10:58:19 It worked on 2.2.3 Oct 15 10:58:44 I ugraded to the latest Elan firmware with my 2.0g, but still no luck Oct 15 10:59:09 Hopefulle saturday, when my 2.0n will arrive, I have more luck...... Oct 15 11:00:09 voorstad: Where did you get the audio modules? Is there an audiocli package for 2.3 already? Oct 15 11:00:25 blathijs: for 20n yes Oct 15 11:03:11 http://download.fonosfera.org/plugins/ Music 1.0 (tried the other ones as well....) Oct 15 11:27:06 @ blogic: where can I found this audiocli package for 2.0n? Oct 15 11:27:39 (found = find) Oct 15 11:49:20 mmmm, seems I'm gonna cancel my Fonera 2.0n order :-) Oct 15 11:50:13 http://download.fonosfera.org/plugins/ Oct 15 11:50:29 music_1.6_fonera20n_2.3.0.0_fon.tar.gz contains audiocli and kmods Oct 15 11:51:04 xMff Is this a new version? Oct 15 11:51:22 Decodecoding: it is the latest Oct 15 11:55:19 Is the 2.0n kernel different from the 2.0g kernel? Oct 15 11:55:34 yes Oct 15 11:55:35 Umm, I didn't get it to play streaming music... Oct 15 11:55:37 Apart from the drivers shipped, which probably differ, of course? Oct 15 11:56:00 I'll report more precisely. Oct 15 12:07:34 A very good review in french: http://www.youtube.com/watch?v=JCXuqdR7x-Y&feature=player_embedded# Oct 15 12:23:45 blathijs: he isn't sure but he thinks mtd7: 00010000 00010000 "board_config". How can I boot into failsafe mode? Oct 15 12:26:53 MVXA: See the wiki, failsafe_mode page IIRC Oct 15 12:28:17 MVXA: Not sure what is in that area of flash, not sure if failsafe mode will help with that Oct 15 12:30:34 all wiki pages are talking about that the fonera's ip is 192.168.1.1 Oct 15 12:30:36 that isn't the case with my router, is this bad? Oct 15 12:31:46 I think it's configurable (at least in normal mode) Oct 15 12:31:56 192.168.1.254 i meant... T_T Oct 15 12:32:08 thats the IP of my router Oct 15 12:33:49 Then you probably changed it in the settings? Shouldn't hurt, AFAIK Oct 15 12:34:03 nope <.<... Oct 15 12:34:51 dunno then Oct 15 12:37:14 afaik he tried to flash openwrt on that router... I hope you aren't bad with me now :| Oct 15 12:41:22 Hehe, I think blogic said just now that he was working to enable clean openwrt on the 2.0n, so no :-) Oct 15 12:55:21 =D Oct 15 12:55:24 well Oct 15 12:55:29 no http interface :| Oct 15 12:55:33 but i can connect over telnet Oct 15 12:56:02 == Executing boot script in xxx seconds ... == Oct 15 12:56:06 pressed ctrl + C Oct 15 12:56:12 but nothing happens now D: Oct 15 12:57:00 That sounds like at least redboot is still doing something Oct 15 12:57:09 "something" Oct 15 12:57:09 MVXA: Did you check the wiki on how to use redboot? Oct 15 12:58:06 „Only valid for Fonera 2200, 2201, 2202 (October 2008 "beta" developer version). (Some) non-beta versions of the 2202 have the redboot interface disabled accidentally. You would do well to doublecheck that redboot is working before tinkering with your firmware. “ Oct 15 12:58:16 well, I have a 2202 device <_< Oct 15 12:58:59 MVXA: When did you buy it? Oct 15 12:59:06 that router is a cute and powerful device, I really would like to use it for something else then as a brick Oct 15 12:59:15 bought it from a friend yesterday Oct 15 12:59:18 for 5 eur <_< Oct 15 12:59:22 he told me that he bricked it Oct 15 12:59:29 Ah, your friend bricked it, but now it is your router :-) Oct 15 12:59:30 I hoped I could try to unbrick it Oct 15 12:59:38 indeed Oct 15 12:59:41 I thought there were two different routers involved Oct 15 12:59:49 Any clue when he bought it? Oct 15 12:59:58 iurgi: Any luck on that list of mac addresses? Oct 15 13:00:24 asked him, waiting for an answer now <_< Oct 15 13:01:03 But I would think that on the non-working models, redboot would just not even listen on the network at all Oct 15 13:01:06 Not sure though Oct 15 13:02:23 mhh... wouldn't it be possible to unbrick it over jtag :|? Oct 15 13:03:50 No clue, I expect there is something like that, but I've never opened my device :-) Oct 15 13:04:18 thanks man :| Oct 15 13:04:33 you got already to the reboot prompt Oct 15 13:04:34 all is well Oct 15 13:04:38 do you use linux? Oct 15 13:05:17 if yes, you need to put that into a file called .telnetrc in your home folder: Oct 15 13:05:17 192.168.1.254 Oct 15 13:05:17 mode line Oct 15 13:05:26 then ctrl-c will work Oct 15 13:05:59 jtagging is like 10x more complex than flashing over redboot Oct 15 13:06:30 also you'd need to obtain suitable images for redboot, boardconfig, firmware then Oct 15 13:07:03 MVXA: The wiki says that 192.168.1.254 is exactly the address it should be, so what was your problem with the address before? Oct 15 13:07:15 Oh, wait, it doesn't Oct 15 13:07:21 i understood the wiki like my Computer should have that IP Oct 15 13:07:23 not the router Oct 15 13:07:25 It says to use 192.168.1.254 for the computer ip Oct 15 13:07:28 ip doesn't matter actually Oct 15 13:07:34 my english isn't well so... Oct 15 13:07:40 1.1 just happens to be default Oct 15 13:07:47 but if it listens on 254, fine too Oct 15 13:08:08 xMff: But it's pretty hard to change the redboot IP, I guess? Or is there a series of 2.0g's that listens on .254 by default? Oct 15 13:08:11 that does not invalidate the rest of the instructions Oct 15 13:08:25 blathijs: hard? telnet + fconfig Oct 15 13:08:39 a matter of seconds Oct 15 13:09:13 Ah, it's just hard to change the config to enable it if it isn't enabled already, then :-) Oct 15 13:09:52 yes, but in his case it is clearly enabled, he was already connected to redboot Oct 15 13:10:26 MVXA: do you use linux? Oct 15 13:10:41 ofc Oct 15 13:10:44 everywhere =D Oct 15 13:10:56 good, create file called ".telnetrc" in your home Oct 15 13:10:59 xMff: That issue with mode line, is that why the wiki page says to use putty instead of normal telnet? Oct 15 13:11:00 laptop, desktop, server, pentium1 router, even my dad's computer runs linux <_< Oct 15 13:11:02 i did Oct 15 13:11:04 and it worked =D Oct 15 13:11:07 ok Oct 15 13:11:10 I have a redboot commandline now Oct 15 13:11:11 huge thanks Oct 15 13:11:16 i own you a beer of your choice =D Oct 15 13:11:40 blathijs: yes, I think so Oct 15 13:12:16 well that makes sense but since I prefer the command line version of a tool... Oct 15 13:13:13 MVXA: now you need to find out which ip redboot expects to be the tftp server, give your pc this ip and proceed with the instructions from the wiki, replace the default ips there with the ones used in your case Oct 15 13:13:53 if it listens on .254 right now it surely wants the tftp server to be on .1 Oct 15 13:17:46 I've put those instructions on the wiki as well Oct 15 13:31:51 well, i can see the package from the router to my notebook via wireshark Oct 15 13:31:58 but my tftpd isn't responding T_T Oct 15 14:07:28 I don't know why TFTP server shown as the preferred method of loading files in RedBoot. Oct 15 14:07:46 I find it much easier to use normal HTTP Oct 15 14:09:14 not every redboot version supports http Oct 15 14:09:26 not every user is able to run an http server Oct 15 14:09:35 Fonera's does. Oct 15 14:10:00 I think there are many more people who already run apache. Oct 15 14:10:09 or IIS Oct 15 14:11:07 ninch2: no Oct 15 14:11:13 IIS is not run by many people Oct 15 14:11:16 neither apache Oct 15 14:11:21 some nerds might run IIS Oct 15 14:11:24 some nerds might run apache Oct 15 14:11:44 IIS is so far away from anything usefull (specially homeusers) Oct 15 14:12:08 Maybe. I spend too much time with web devs then ;) Oct 15 14:12:39 blogic: I guess the people who screw up their system and need redboot have an increased likelyhood of having a HTTP server around :-) Oct 15 14:12:46 hmm Oct 15 14:12:47 ok Oct 15 14:12:50 but not IIS Oct 15 14:12:53 :) Oct 15 14:12:58 No, not IIS :-) Oct 15 14:13:07 although i leave the m$ ranting to martin Oct 15 14:13:08 Win Server 03 crowd Oct 15 14:13:27 Windoews ? thats the bootstrap system you use to install linux ?! Oct 15 14:13:28 :) Oct 15 14:13:42 Well, to get a file from http://192.168.1.253:80/fon/firmware.bin you have to type load -r -b 0x80100000 /fon/firmware.bin -m HTTP -p 80 -h 192.168.1.253 Oct 15 14:13:45 * xMff has to care for 2k3 servers :( Oct 15 14:14:05 xMff: ? Oct 15 14:14:19 job Oct 15 14:14:22 ah ok Oct 15 14:14:50 ninch2: Care to put that commandline on the wiki? Oct 15 14:14:56 feels like playing with Duplo Oct 15 14:15:23 ninch2: For example around here: http://wiki.fon.com/wiki/Firmware_Update_Instructions#I_only_want_to_flash_the_new_firmware Oct 15 14:15:40 Yes, I wanted to put something in wiki. Registered and then had to wait to get account confirmed. But then I forgot. Oct 15 14:16:56 :-) Oct 15 14:17:18 xMff: what is taht Oct 15 14:17:26 blogic: lgo for babies Oct 15 14:17:29 *Lego Oct 15 14:18:00 yAy Oct 15 14:18:00 i still got some Oct 15 14:18:05 It's too big to swallow... Oct 15 14:18:57 indeesd Oct 15 14:42:56 i prefer lighttpd as httpd Oct 15 14:43:19 windows isn't supposed as a server os so I have no clue why ppl even think about using iis :p Oct 15 15:13:01 tftp ist the most easy protocol but it seems that the protocol lacks a good server which runs out of the box Oct 15 15:13:34 linux or windows ? Oct 15 15:13:40 linux Oct 15 15:13:45 which distro? Oct 15 15:13:49 i can't get the kernel.org one working Oct 15 15:14:02 archlinux Oct 15 15:14:08 hmm Oct 15 15:14:14 i use atftpd on debian Oct 15 15:14:19 works out of the box Oct 15 15:14:28 "--tftpd-timeout 300 --retry-timeout 5 --mcast-port 1758 --mcast-addr 239.239.239.0-255 --mcast-ttl 1 --maxthread 100 --verbose=5 /tftpboot --daemon" Oct 15 15:14:39 tftpd-hpa here Oct 15 15:14:49 well i can't get the tftpd-hpa working Oct 15 15:15:02 Not all Linuxes are created equal. Oct 15 15:15:06 atftpd requires me to build that package first Oct 15 15:15:24 MVXA: make sure it runs standalone in daemon mode Oct 15 15:15:32 most distros ship it in inetd mode by default Oct 15 15:15:58 how can I enforce the standalone mode <. RUND_DAEMON=yes in /etc/default/tftp-hpa uder *buntu Oct 15 15:16:20 no idea about arch Oct 15 15:17:18 maybe there is a hint on the arch wiki Oct 15 15:18:03 gotcha Oct 15 15:18:08 i'm at the notebook Oct 15 15:18:18 /usr/sbin/in.tftpd -l -s /var/lib/tftpboot Oct 15 15:18:28 that is my command line here Oct 15 15:18:33 just run that as root Oct 15 15:18:40 thanks, it seems like hosts.allow requires some changes too Oct 15 15:18:41 and put the files in /var/lib/tftpboot Oct 15 15:18:46 ah Oct 15 15:18:52 security foo :P Oct 15 15:18:56 :p Oct 15 15:24:57 arch is fine, i would even use it on the fonera if i could flash it <_< Oct 15 15:27:11 no normal linux is fine on embedded hw Oct 15 15:27:18 they're all far too fat Oct 15 15:30:02 sure, but an arch like distri with the arch philosophy in mind would be awesome Oct 15 15:31:26 I don't like the package manager Oct 15 15:32:13 or better I don't like the fact that they have a custom package format Oct 15 15:34:36 it's a feature imho. Just a simple tar file you can open, unpack, etc without special tools <_< Oct 15 15:35:38 if you need to do that, the package management is flawed :P Oct 15 15:36:22 it could be used for an web frontend in example to see the files in the archive :P Oct 15 15:37:21 dpkg -c ...deb Oct 15 15:37:31 ;) Oct 15 15:38:01 well, debian packages are afaik packed in the ancient ar file format :p Oct 15 15:39:08 well, opinions drift here, I like the count of linux distris Oct 15 15:41:44 linux is modelled after an ancient operating system ;) Oct 15 15:42:30 pff :P Oct 15 16:10:27 how much time takes the exec command? Oct 15 16:11:54 time exec abc Oct 15 16:12:01 that tells you the runtime time Oct 15 16:12:04 in redboot Oct 15 16:12:13 <_< Oct 15 16:12:51 exec should take almost no time Oct 15 16:13:02 well then something went wrong Oct 15 16:13:04 if it hangs without output it could not boot the kernel Oct 15 16:13:25 well sometimes decompression can take a few seconds Oct 15 16:13:56 i used the openwrt kernel, rootfs and instructions >_< Oct 15 16:15:26 MVXA: http://flash.fonera.be/ Oct 15 16:15:31 just use the flash utility Oct 15 16:17:17 aye aye Oct 15 16:17:23 and thanks =D Oct 15 16:54:30 blathijs: been sick today Oct 15 16:54:31 :( Oct 15 16:54:39 I am trying to catch up with work just know Oct 15 16:54:46 I will try that too Oct 15 16:57:36 the fonera freezes on redboot commands like get_mac too D: Oct 15 16:58:11 well if board_config was nuked... Oct 15 16:58:25 it cant be restored D:? Oct 15 16:58:41 MVXA: fconfig -a Oct 15 16:58:43 i think Oct 15 17:02:12 there is no such parameter :x Oct 15 17:18:44 MVXA: have you tried flashing mtd8 with a good boardconfig? Oct 15 17:19:00 iurgi: No rush, I was just wondering :-) Oct 15 17:19:06 i'm sorry but where can I find that o.o? Oct 15 17:19:46 On a working Fonera ;-) Oct 15 17:20:22 can you provide me with that pleeaaasssee <. no Oct 15 17:21:21 the boardconfig has fon specific info in it Oct 15 17:21:28 which is different from fon to fon Oct 15 17:21:31 go damn it.. Oct 15 17:21:32 god* Oct 15 17:21:33 it holds the aes key Oct 15 17:21:45 *ck >_< Oct 15 17:21:52 AES key? Or the PSK? Oct 15 17:22:38 can't I request a new binary to flash from the hw distributors <. blogic: So flashing in the boardconfig from another fonera will change the default PSK / Wifi stuff? Perhaps also the serial it uses to register to fon.com? Or is that what this AES key is for? Oct 15 17:23:48 yes Oct 15 17:25:17 better than a brick imo Oct 15 17:25:35 everything is better than a brick... Oct 15 17:26:01 But if flashed with non-fon FW, it at least won't be a brick? Oct 15 17:26:35 with such informations, shouldn't this area remain untouched? Oct 15 17:26:50 MVXA: tell that your friend ;) Oct 15 17:27:17 i promissed him i'll beat him whenever i meet him in RL <.<. I only know him from IRC... Oct 15 17:33:34 is fonera redboot able to decompress lzma? Oct 15 17:34:26 yes Oct 15 17:36:06 yipee Oct 15 18:40:46 Yippeee!!! Finally my USB soundcard is streaming music on my FON 2.0g !!! Oct 15 18:45:07 With this version: http://flash.fonera.be/FON2202/music_1.6_fonera2_2.3.0.0_fon.tar.gz Oct 15 19:14:33 voorstad: Cool :-) Oct 15 19:16:04 So everyone can buy a USB soundcard stick like this: http://www.dealextreme.com/details.dx/sku.21813 Oct 15 19:16:35 cool o: Oct 15 19:16:44 Streaminf music for the price of 2 stamps (and a fonera) Oct 15 19:16:44 voorstad: I think that most USB soundcards work, I think USB audio is pretty much standardized Oct 15 19:17:01 My terratec USB audio thingy worked as well Oct 15 19:17:05 tried to flash the board_config via redboot load and fis create but it complains about bad memory range, what can i do D:? Oct 15 19:17:20 sure, but for $2,87 free at home... Oct 15 19:17:32 But I want to do streaming with pulseaudio, so I can just select my fonera as an output on my local PC, instead of letting the Fonera pull mp3 in Oct 15 19:17:51 MVXA: Did you check the partition table against the one on the wiki? Oct 15 19:18:40 @ blathijs Pulseaudio?? Oct 15 19:19:43 blathijs: yes, correct Oct 15 19:19:48 voorstad: It's the new standard audio subsystem on Linux, that does fancy things like mixing, resampling but also transparent network tunneling Oct 15 19:19:55 audio drivers are pretty much standarized Oct 15 19:20:00 execpt for fancy options Oct 15 19:20:40 MVXA: why do you want to right the boardconfig? Oct 15 19:20:40 this can break your fonera, imho Oct 15 19:20:46 there is no board config atm i guess <_< Oct 15 19:20:56 at least I can't find or access it Oct 15 19:21:02 atm Oct 15 19:21:23 not with fi li? Oct 15 19:21:25 i hoped the board config would solve the problem :| Oct 15 19:21:31 what problem? Oct 15 19:21:53 bought the fonera router from a friend. He said he bricked it somehow but he isn't sure anymore how... Oct 15 19:22:05 oh Oct 15 19:22:09 what fonera is it? Oct 15 19:22:12 2202 Oct 15 19:22:25 ok Oct 15 19:22:31 hmmmmmm Oct 15 19:22:34 redboot is accessible but flashed firmware isn't booted Oct 15 19:22:44 can you pastebin fi li? Oct 15 19:22:44 by redboot, exec hangs Oct 15 19:23:06 hmmm Oct 15 19:23:17 what command do you use? Oct 15 19:23:19 exactly? Oct 15 19:23:24 exec <_< Oct 15 19:23:27 no Oct 15 19:23:31 that's not what you need to use Oct 15 19:23:39 :) Oct 15 19:23:47 i followed the instructions on the openwrt page :| Oct 15 19:24:00 hmmm Oct 15 19:24:01 see Oct 15 19:24:15 my guess is that your friend used a tool that was done for fonera+ or so Oct 15 19:24:22 and it changed his boot command Oct 15 19:24:27 and now you're using a wrong one Oct 15 19:24:31 let me find the correct one Oct 15 19:24:45 huge thanks Oct 15 19:25:17 might not be the problem though Oct 15 19:25:37 it's a try worth Oct 15 19:26:17 hmm Oct 15 19:26:20 might be exec Oct 15 19:26:25 do you load the loader first? Oct 15 19:26:39 fis load loader Oct 15 19:26:40 exec Oct 15 19:27:02 do you have a loader so far? Oct 15 19:28:03 http://wiki.openwrt.org/oldwiki/openwrtdocs/hardware/fon/fonera2 that is what i have tried so far Oct 15 19:28:53 can you pastebin fi li? Oct 15 19:28:58 on redboot run "fi li" Oct 15 19:29:03 and paste it in pastebin.com Oct 15 19:29:06 and give me the link Oct 15 19:29:06 :) Oct 15 19:29:13 uhm... Oct 15 19:29:17 give me 5 minutes Oct 15 19:29:27 what firmware do you want, openwrt or fon? Oct 15 19:29:41 I am not 100% confident on how to put only openwrt in there... Oct 15 19:29:45 so I can't help you meuch Oct 15 19:29:47 much Oct 15 19:29:51 long time since I last did it Oct 15 19:33:11 my notebook... http://pastebin.com/d19d0518d Oct 15 19:33:41 well... you have no firmware in there Oct 15 19:33:43 :o Oct 15 19:34:04 as I told you, i followed the instructions on the openwrt wiki Oct 15 19:34:16 thus i cleaned the partition table with fis init Oct 15 19:34:27 yes, but you flashed no other firmware Oct 15 19:35:26 i'll flash them now Oct 15 19:36:03 http://pastebin.com/d4775e44 are these infos correct? Oct 15 19:37:16 no Oct 15 19:37:24 the memory address is incorrect Oct 15 19:37:31 these are the correctones Oct 15 19:37:38 http://wiki.fon.com/wiki/Firmware_Update_Instructions Oct 15 19:38:33 if you don't mind restoring the fonera 2.0g to the fon-ng firmware, I suggest you follow the steps on "My partition table is different!" section Oct 15 19:40:27 is %{FREEMEMLO} automatically replaced <_ yes Oct 15 19:40:50 ah, n1 Oct 15 19:41:02 it is a pointer to the first free memory position, imo Oct 15 19:43:15 iurgi: You seem to use imo a lot, where I'd expect you to use IIRC Oct 15 19:43:28 IIRC? Oct 15 19:43:29 iurgi: Does your imo mean In My Opinion? Oct 15 19:43:35 well... Oct 15 19:43:35 If I Recall Correctly :-) Oct 15 19:43:36 hahaah Oct 15 19:43:39 good question Oct 15 19:43:51 the thing is I have ended up using it as "I think" Oct 15 19:44:00 instead of "in my opinion" Oct 15 19:44:01 lol Oct 15 19:44:12 what's IIRC? Oct 15 19:44:34 I thought it was an error of the IRC system or something Oct 15 19:44:34 lol Oct 15 19:45:58 if I recall correctly Oct 15 19:46:02 ahhhhhhhhhhhh Oct 15 19:46:04 nice Oct 15 19:46:05 :P Oct 15 19:46:14 good to know Oct 15 19:46:21 yes Oct 15 19:46:23 way shorter Oct 15 19:46:23 blathijs: yes, I use imo when I should say IIRC Oct 15 19:46:24 :) Oct 15 19:46:36 thanks :) Oct 15 19:55:24 okey... 20090922_FON2202_2.3.0.1_RC1.image ← this is the right image, or? Oct 15 19:58:03 yes Oct 15 20:46:12 http://wiki.fon.com/wiki/Firmware_Update_Instructions#My_partition_table_is_different.21 ← is FON2202.image the 20090922_FON2202_2.3.0.1_RC1.image file an FON2202.image2 the failsafe image? Oct 15 20:56:27 i know I'm anoying but I dont want to make the brick more worse <_< Oct 15 21:02:04 yes I think your assumption is correct Oct 15 21:22:38 everything flashed. I need the proper boot script now, cant find it on the wiki D: Oct 15 21:23:09 can you put the redboot commands you did into pastebin? Oct 15 21:23:36 i would like to finish the setup first since I have to unplug the router in order to paste something in the internet with my notebook >.< Oct 15 21:25:16 try: Oct 15 21:25:16 fis load -l loader Oct 15 21:25:16 exec Oct 15 21:25:21 as script Oct 15 21:25:59 okey, thanks Oct 15 21:31:54 http://paste.pocoo.org/show/agvH8480DaSZwYQUXjM6/ Oct 15 21:34:08 the load -l loader was a guess by me but since there is no kernel partition the loader is the only candidate suitable for booting Oct 15 21:34:36 so try variations of load -l loader; exec or load loader; exec Oct 15 21:34:46 maybe someone else can help here Oct 15 21:34:48 can't you take a look in your boot script :|? Oct 15 21:35:12 no, I have a non-standard config Oct 15 21:36:36 http://wiki.fon.com/wiki/La_Fonera_2.0/zh ← uses that line too Oct 15 21:36:42 fis load loader\nexec Oct 15 21:37:20 i try to restart the fonera now, wish me some luck :p Oct 15 21:38:15 ah *fis* load loader Oct 15 21:38:18 forgot that Oct 15 21:40:00 back Oct 15 21:40:03 sorry, I was out Oct 15 21:41:26 MVXA: I think the -l is wrong Oct 15 21:41:39 nothing happens =| Oct 15 21:41:43 that would imply that the loader is lzma compressed Oct 15 21:41:45 even without the -l Oct 15 21:42:01 fis load loader Oct 15 21:42:15 then exec Oct 15 21:42:19 that's what i have typed directly into the telnet cli Oct 15 21:42:28 can you run fi li Oct 15 21:42:31 and paste it? Oct 15 21:42:40 or you need to diconnect ect? Oct 15 21:42:42 etc? Oct 15 21:42:45 http://paste.pocoo.org/show/agvH8480DaSZwYQUXjM6/ Oct 15 21:42:53 ah Oct 15 21:43:40 hmmm Oct 15 21:43:43 seems ok Oct 15 21:43:51 image length is different to mine Oct 15 21:43:55 but shouldn't be a problem Oct 15 21:44:00 i guess my friend did a real good job on breaking the router <_< Oct 15 21:44:13 and also the entry point of the failsafe image is different Oct 15 21:44:17 but that shouldn't affect this Oct 15 21:44:20 hmmm Oct 15 21:44:21 nah Oct 15 21:44:29 I don't think the problem is related to that Oct 15 21:44:30 I mean... Oct 15 21:44:42 http://download.fonosfera.org/RC/20090922_FON2202_2.3.0.1_RC1.image ← that is the image i flashed Oct 15 21:44:43 it's strange that redboot won't even try to load the loader... Oct 15 21:45:18 hi guys Oct 15 21:45:26 I cannot access my Trasmission web UI anymre :\ Oct 15 21:45:32 don't know what's happening... Oct 15 21:45:48 I've tried to stop/restart trasmission from the web ui... but it didn't work... Oct 15 21:45:56 I can access to SSH if you need more info... Oct 15 21:46:06 Andy80: try ps Oct 15 21:46:10 and see if transmission is running Oct 15 21:46:19 sometims... Oct 15 21:46:31 it take sveeeeeeery long to show the transmission web ui Oct 15 21:46:39 since transmission is busy creating a large file Oct 15 21:46:46 did you recently add any torrents to the queue? Oct 15 21:47:13 iurgi: trasmission is not in the process list :\ Oct 15 21:47:18 hmmm Oct 15 21:47:22 well, then it stopped Oct 15 21:47:23 :o Oct 15 21:47:31 just reboot Oct 15 21:47:33 or you already did? Oct 15 21:47:38 I did :\ Oct 15 21:47:46 hmmm Oct 15 21:47:47 weird Oct 15 21:47:50 really weird Oct 15 21:47:56 did you touch anything else? Oct 15 21:47:58 p.s: I'm using 2.2.5 RC5 Oct 15 21:48:01 is there room in the disk? Oct 15 21:48:05 2.2.5? Oct 15 21:48:06 hmm Oct 15 21:48:08 upgrade, please Oct 15 21:48:12 no... just did a reboot after the web UI become unresponsive... Oct 15 21:48:43 iurgi: ehm... just remember that I'm not at home and I've to do it from remote :) if I loose my settings, I won't able to access it anymore :P Oct 15 21:49:09 the settings are kept Oct 15 21:49:12 or they should be... Oct 15 21:49:18 but maybe not the port forwarding Oct 15 21:49:19 hmmm Oct 15 21:49:26 you better wait till you are at home Oct 15 21:49:37 why are you not at home at midnight???? Oct 15 21:49:45 hope you'r enot working Oct 15 21:50:09 iurgi: well... I'm in Valencia for my erasmus :D I won't be back home until christmass :P Oct 15 21:50:26 WOWOWOW Oct 15 21:50:29 ok Oct 15 21:50:30 haha Oct 15 21:50:33 that makes sense Oct 15 21:50:35 but... at this point I can try and we'll see... Oct 15 21:50:39 why is your fonera not with you? Oct 15 21:50:53 you're downloading all the Internet into it and then you have it as a christmas present or what? Oct 15 21:50:57 lol Oct 15 21:50:57 iurgi: because it has to stay at home and use my ADSL to download torrents ;) Oct 15 21:51:06 lol Oct 15 21:51:15 cannot use torrent here :) Oct 15 21:51:21 ah Oct 15 21:51:21 ok Oct 15 21:51:27 there's something else you can try first Oct 15 21:51:39 I don't have a fonera here now Oct 15 21:51:41 I'm at home Oct 15 21:51:49 isn't there something like: /etc/init.d/trasmission start? Oct 15 21:51:54 just twisted my ancle yesterday and I need to stay laying on the sofa Oct 15 21:52:01 yes, there is Oct 15 21:52:07 but it's different Oct 15 21:52:16 I can't remember the syntax Oct 15 21:52:37 ok... I can try the upgrade then... Oct 15 21:52:54 if something goes wrong... well, I can send a friend to my house tomorrow or later... Oct 15 21:53:08 it's something like fon_image.sh torrent start /tmp/mounts/Disk-A1 Oct 15 21:53:10 or similar Oct 15 21:54:30 do you suggest me to use SSH update method or the web one? Oct 15 21:54:39 web Oct 15 21:54:46 otherwise you lose the settings Oct 15 21:55:01 but, I'm pretty sure you will lose the port settings Oct 15 21:55:57 try to start it first Oct 15 21:56:04 ok... I restart again Oct 15 21:56:19 ok... rebooting... Oct 15 21:56:20 try to find out what the coommend is Oct 15 21:56:43 btw: what is the latest firmware? it's very confusing: http://download.fonosfera.org/ Oct 15 21:57:09 latest is a release candidate Oct 15 21:57:35 2.3.0.1_RC1 Oct 15 21:57:49 http://download.fonosfera.org/RC/20090922_FON2202_2.3.0.1_RC1.image Oct 15 21:57:58 wiat Oct 15 21:58:02 http://download.fonosfera.org/RC/20090922_FON2202_2.3.0.1_RC1.tga Oct 15 21:58:03 http://download.fonosfera.org/RC/20090922_FON2202_2.3.0.1_RC1.tgz Oct 15 21:59:20 tnx :) Oct 15 21:59:41 ok... F2 is online again... I'm in the dashboard Oct 15 21:59:58 ok Oct 15 22:00:00 Torrent is currently running. You can view the status or add new torrents, with the firefox plugin or the transmission web interface. Oct 15 22:00:08 also... after reflashing the web access will be closed Oct 15 22:00:10 (this is what dashboard says...) Oct 15 22:00:20 because web access in RC1 is on https, port 443 Oct 15 22:01:07 ah ok Oct 15 22:01:19 well... I can modify ports on my home router Oct 15 22:01:32 yeah, but additionally... Oct 15 22:01:36 but... if the "wan" access is closed... I cannot do anything... Oct 15 22:01:37 the wan access is closed Oct 15 22:01:42 until you set again the password Oct 15 22:01:43 yeah :\ Oct 15 22:01:58 because the file that specifies that /etc/config/system is not saved :( Oct 15 22:02:08 sorry, remote upgrade will make your fonera unavailable Oct 15 22:02:10 100% sure Oct 15 22:02:22 btw.... dashboard says Trasmission is runnig, but cannot see it in ps -aux output Oct 15 22:02:23 .\ Oct 15 22:02:39 how does it say it's running? Oct 15 22:02:49 can you access the transmission interface? Oct 15 22:03:02 if I click on the torrent icon, it says: Oct 15 22:03:10 Torrent Oct 15 22:03:10 Torrent is currently running. You can view the status or add new torrents, with the firefox plugin or the transmission web interface. Oct 15 22:03:10 Your torrents will be downloaded to \Disc-A1\torrent\ Oct 15 22:03:26 Dashboard UI says that Oct 15 22:03:37 ok Oct 15 22:03:46 but the webUI of trasmission is not accessible Oct 15 22:03:51 but transmission ui is not working Oct 15 22:03:52 ok Oct 15 22:03:53 hmmm Oct 15 22:03:56 that isstrange Oct 15 22:04:01 not strange... Oct 15 22:04:04 I dont know what tosay Oct 15 22:04:13 trasmission process is not running, I told you :P Oct 15 22:04:13 try the command I told you... Oct 15 22:04:30 I mean it's strange that the webui thinks it is Oct 15 22:04:38 fon_image.sh torrent start /tmp/mounts/Disk-A1 ? Oct 15 22:04:49 well, try fon_image.sh first Oct 15 22:04:53 that is the thing I don't remember Oct 15 22:05:02 root@Fonera:~# fon_image.sh torrent start /tmp/mounts/Disk-A1 Oct 15 22:05:02 /sbin/uci: Entry not found Oct 15 22:05:02 /sbin/uci: Entry not found Oct 15 22:05:02 /sbin/uci: Entry not found Oct 15 22:05:11 ps Oct 15 22:05:55 iurgi: http://pastebin.ca/1622880 Oct 15 22:06:27 ls /tmp/mounts/* Oct 15 22:07:08 root@Fonera:~# ls /tmp/mounts/* Oct 15 22:07:08 FoneraApps World of Warcraft torrent Oct 15 22:07:52 hmmm Oct 15 22:07:55 strange Oct 15 22:07:58 hmmm Oct 15 22:08:03 you can try something Oct 15 22:08:08 can I try to uninstall/reinstall trasmission? Oct 15 22:08:16 yes Oct 15 22:08:18 exactly Oct 15 22:08:34 just remove FoneraApps and torrent from the disk Oct 15 22:08:36 and reboot Oct 15 22:08:57 torrent/ NEVER :P it contains lot of downloaded stuff ;) Oct 15 22:09:08 ahhhhhhhh Oct 15 22:09:09 I can remov FoneraApps :D Oct 15 22:09:09 hahaha Oct 15 22:09:13 ok? Oct 15 22:09:14 move it to torrent2 Oct 15 22:09:23 uhm.... Oct 15 22:09:32 ok... Oct 15 22:10:12 that should be sage Oct 15 22:10:13 safe Oct 15 22:10:18 root@Fonera:~/run/mountd/sda1# rm -rf FoneraApps/ Oct 15 22:10:18 rm: cannot remove 'FoneraApps': Directory not empty Oct 15 22:10:25 rm -Rf Oct 15 22:10:31 ah Oct 15 22:10:33 already did Oct 15 22:10:36 hmmm Oct 15 22:10:40 wtf Oct 15 22:10:44 root@Fonera:~/run/mountd/sda1/FoneraApps# ls -al Oct 15 22:10:44 drwxrwxrwx 1 root root 0 Aug 26 19:35 . Oct 15 22:10:44 drwxrwxrwx 1 root root 4096 Aug 26 19:35 .. Oct 15 22:10:44 -rwxrwxrwx 1 root root 4718592 Aug 26 19:26 .fuse_hidden0000000300000001 Oct 15 22:10:44 -rwxrwxrwx 1 root root 132644864 Aug 26 19:22 .fuse_hidden0000000400000002 Oct 15 22:10:59 ahhhhhhh Oct 15 22:11:06 you're using ntfs Oct 15 22:11:20 uhm..... yes... it's possible... Oct 15 22:11:23 is it a problem Oct 15 22:11:25 ? Oct 15 22:11:30 not necessarily... Oct 15 22:11:32 just slower Oct 15 22:11:35 and crappier Oct 15 22:11:36 :\ Oct 15 22:11:36 haha Oct 15 22:11:39 but not a problem Oct 15 22:12:01 just leave it for a few minutes... it will hopefully umount Oct 15 22:12:01 well... ok... let's be smart... Oct 15 22:12:04 unmount Oct 15 22:12:11 all /torrent/ stuff can be downloaded again... Oct 15 22:12:15 nah Oct 15 22:12:16 see Oct 15 22:12:33 mv FoneraApps old_FoneraApps Oct 15 22:12:40 mv torrents torrents2 Oct 15 22:12:42 reboot Oct 15 22:12:55 ok.... rebooting... Oct 15 22:13:43 didn't know that ntfs was slower... I formatted it with ntfs because if I download something bigger than 4,2 Gb FAT32 cannot manage it Oct 15 22:13:57 ext2/ext3 is your friend Oct 15 22:13:58 :) Oct 15 22:14:44 yes but.... always permission problems if file is created by another user... so it makes it difficoult to use that disk on many computers Oct 15 22:14:49 even if they run Linux Oct 15 22:15:18 that can be solved Oct 15 22:15:34 but well... if you are accessing itover samba or remotely... that shouldn't affect you Oct 15 22:15:36 linux needs a right neutral filesystem for portable storage devices Oct 15 22:15:55 it is called "tar" :P Oct 15 22:16:13 xMff: please be serious :) Oct 15 22:16:20 even "tar" knows user rights :P Oct 15 22:16:23 tar -cz /foo | dd of=/dev/sda ;) Oct 15 22:16:46 lol Oct 15 22:16:57 that's quite hacky ;) Oct 15 22:16:59 iurgi: ok... I'm inside dashboard... I install Trasmission again Oct 15 22:17:14 ok Oct 15 22:17:53 how long does it take, more or less? Oct 15 22:18:47 * Andy80 considering buying Fonera 2.0n since I've the discount code... Oct 15 22:19:45 andy about 3min Oct 15 22:19:51 ok Oct 15 22:20:02 maybe a bit more Oct 15 22:23:23 * Andy80 going to take something to drink... Oct 15 22:25:38 There is already a installation in progress, please try again in a few minutes ... Oct 15 22:25:47 ok Oct 15 22:26:02 * Andy80 goes back to take a RedBull for his Fonera2 :) Oct 15 22:26:31 lol Oct 15 22:27:54 if you like the fonera2 i strongly recomend you to get the 2.0n Oct 15 22:29:27 yes.... I like 20.n too, but... look: you started with Linksys routers... then you created something small like a cigarette package, than bigger... than even more big... than... again something big like the old Linksys :\ Oct 15 22:29:54 yeah... Oct 15 22:30:01 the design of the 2.0g version was better imho Oct 15 22:30:14 yes, I agree Oct 15 22:30:23 the design of the 11n sucks a bit Oct 15 22:30:26 but we didn't do it Oct 15 22:30:45 we just needed something acceptable that could hold all our dreams ;) Oct 15 22:30:50 I think it'll shrink over time Oct 15 22:30:51 maybe in the future... Oct 15 22:30:59 i hope so Oct 15 22:31:03 xMff: automatically? haha Oct 15 22:31:05 and it should get the white case back <_< Oct 15 22:31:17 MVXA: in japan the 11n is white Oct 15 22:31:20 XD Oct 15 22:31:24 they requested it Oct 15 22:31:30 <_< Oct 15 22:31:37 we made it black foreurope because we thought it looked more... hackish Oct 15 22:31:45 pff D: Oct 15 22:31:47 look at the pcb density on a early wrt54g and then compare it with some modern broadcom board, the pcb is almost blank, everything went into multi purpose chips Oct 15 22:31:58 yes Oct 15 22:32:20 actually the ethernet, usb, wifi...allisin the chip Oct 15 22:32:24 iurgi: ok, now I've clicked on "Startup Disc-1" Oct 15 22:32:25 i hope the fonera routers will never move away from linux friendly hardware =X Oct 15 22:32:55 btw, what can I do with my router now <. MVXA: the foneras are made because of linux Oct 15 22:33:17 I love linux Oct 15 22:33:19 I live for linux Oct 15 22:33:24 i love linux too <_< Oct 15 22:33:33 and I decide what happens with fon's hw Oct 15 22:33:44 so... it's unlikely that we will move away from linux Oct 15 22:33:51 ;) Oct 15 22:33:51 yipeee \o/ Oct 15 22:34:58 mh... Oct 15 22:35:06 the 2.0n looks like my first router Oct 15 22:35:26 yeah Oct 15 22:35:27 hehe Oct 15 22:36:45 ok, I think I'm going to bed Oct 15 22:36:51 and read a little Oct 15 22:36:54 good night Oct 15 22:36:59 .) thanks Oct 15 22:37:03 Andy80: did it work? Oct 15 22:38:58 oh wait... Oct 15 22:39:09 what? Oct 15 22:39:16 Firefox can't establish a connection to the server at 192.168.0.105:9091. Oct 15 22:39:18 no :\ Oct 15 22:39:23 same as before... Oct 15 22:39:36 wow Oct 15 22:39:37 no wait wait Oct 15 22:39:39 it works Oct 15 22:39:42 ah Oct 15 22:39:42 haha Oct 15 22:39:44 good Oct 15 22:39:46 :) Oct 15 22:39:51 using directly: http://andy80.gotdns.org:9091/transmission/web/ Oct 15 22:39:52 :) Oct 15 22:40:06 ah Oct 15 22:40:06 ok Oct 15 22:40:12 well, glad it works Oct 15 22:40:13 :) Oct 15 22:40:33 I'm leaving now then Oct 15 22:40:34 ok.. let's see if I can get Dexter ;) Oct 15 22:40:36 night to all Oct 15 22:40:39 haha Oct 15 22:40:42 night and thank you :) Oct 15 22:40:42 bloooooooooooooooood Oct 15 22:40:48 you're welcome Oct 15 22:40:49 enjoy **** ENDING LOGGING AT Fri Oct 16 02:59:57 2009