**** BEGIN LOGGING AT Wed Mar 03 02:59:58 2010 Mar 03 09:41:05 Hi @ Inouk, you are searching someone to test Hp Laserjet Printers? My linux skills are very basic but i try to help Mar 03 09:44:00 http://www.brutti.com/pics/donne/77.jpg Mar 03 09:52:50 ss111, great i'll PM you Mar 03 11:00:58 ? Mar 03 11:08:09 unstable connection Mar 03 11:08:10 asd Mar 03 12:03:46 Inouk are you here? Mar 03 12:04:34 !kb Danicasti_F2 Mar 03 12:04:36 XD Mar 03 12:05:50 hi all Mar 03 12:06:01 hi Mar 03 12:06:40 i have a problem with transmission in my fonera2.0n: the port is always blocked Mar 03 12:06:48 hi @ all Mar 03 12:07:14 i use the default port (51413) and i tried to redirect it to the fonera ip but no luck Mar 03 12:07:32 default port for what? Mar 03 12:07:50 for bittorrent in the fonera Mar 03 12:08:09 firmware version is 2.3 Mar 03 12:08:14 ah ok and your router "sees" the fonera in your network? Mar 03 12:08:24 2g or 2n? Mar 03 12:08:45 2n Mar 03 12:09:11 and the fonera is the router, my broadband modem is not a router Mar 03 12:09:12 which router do you use? Mar 03 12:09:16 ah ok Mar 03 12:09:26 freebox with router feature disabled Mar 03 12:09:56 it's the French Free ISP modem Mar 03 12:09:56 so you have one network with fonera as DHCP-Server and router right? Mar 03 12:10:06 yes exactly Mar 03 12:10:29 i mean i can redirect ports from WAN to my local computer without any problem Mar 03 12:10:58 ok i have the 2g the is a point under settings ->firewall where you can enable services which can communicate with WAN Mar 03 12:11:05 ah ok Mar 03 12:11:13 (i'm sorry if i'm late to answer... i'm at work :p) Mar 03 12:11:26 but you can not download any torrent? Mar 03 12:11:42 i can but the port is blocked which annoys me Mar 03 12:11:57 do you juse the build in torrent function of the fonera? Mar 03 12:12:09 yes that's it Mar 03 12:12:12 you can download but the port blocks? How does that work? Mar 03 12:12:25 if i use transmission in my own computer there's no problem Mar 03 12:12:43 hum basically i can contact others but they can't contact me Mar 03 12:13:10 but if the others' ports are open then they still can answer to me and then we share data Mar 03 12:13:26 i dont know if the fonera i able to redirect ports in any direction (up and download) Mar 03 12:13:34 but if my ports and the others' ports are blocked we can't connect to each other Mar 03 12:13:57 yeah logical consequence of blocked ports Mar 03 12:14:28 yeah well using my own computer the ports are redirected correctly Mar 03 12:15:09 but using the buildin function it wont work? Mar 03 12:15:45 that's it, even if i add the redirection to the fonera (instead of my computer) Mar 03 12:16:52 i dont know the torrent function but i think a port redirection to the fonera is not necessary, when you enable the torrent function it should be redirected automatically Mar 03 12:17:25 have you tried to enable the torrent function and then restart your fonera? Mar 03 12:18:10 i've restarted the fonera when i updated the firmware (and i had torrent function before updating) Mar 03 12:18:29 i can try it... but not now ;) Mar 03 12:19:20 try this maybe it quite simple :) when you enbale torrent and update firmware you have to re-enable the torrent function and then try to restart Mar 03 12:21:42 ok torrent function is enabled because i'm using it Mar 03 12:22:29 hmm sorry dude i have no idea :) Mar 03 12:22:55 im just a user too and try to fix my printer, or get it to work with fonera Mar 03 12:25:49 ok sorry i can't help you my printer has an ethernet port built-in :) Mar 03 12:48:49 ss111, yes? Mar 03 12:49:17 Wilthril, i don't get where do you see that the torrent port is closed Mar 03 12:49:18 ? Mar 03 12:50:16 it's always open in the fonera, then to have it open from the outside (not really necessary) you just need to redirect it to fonera WAN IP Mar 03 12:50:32 have to go Mar 03 12:50:51 i will answer again later if needed Mar 03 12:58:32 i see it with a website which tells me Mar 03 12:59:37 and yes i want to open it from the outside Mar 03 13:01:44 but i don't get exactly what i have to do, where i can do that, and in this case what is my wan ip (is it the one i get in www.whatismyip.com for example?) Mar 03 13:03:06 by the way the website has a torrent tracker and tells you which port you use and if the port is blocked, so it's testing the fonera not my computer ^^ Mar 03 14:15:17 Wilthril, WAN IP of the fonera not the one of your broadband connection Mar 03 14:15:36 WAN IP of the Fonera is written on the dashboard Mar 03 14:15:49 1sec i'll find you a screenshot... Mar 03 14:19:10 thanks Mar 03 14:43:34 Wilthril, sorry got disturbed Mar 03 14:43:57 ok you see under the internet section: http://wiki.fon.com/wiki/File:2.0n_2.3.0.0_Dasboard.png Mar 03 14:44:18 you have IP address 192.168.1.146 Mar 03 14:44:28 that's the WAN IP of your Fonera Mar 03 14:44:54 i mean that's where the WAN IP is listed Mar 03 14:45:26 forward the torrent port to this IP in your modem/routeur Mar 03 14:46:26 and make sure to have a static DHCP lease or quite long lease so your Fonera doesn't chage Mar 03 14:46:28 of IP Mar 03 14:49:33 ok well the fonera IP won't change i guess since my isp give me a static ip Mar 03 14:49:38 but thanks i'll try it Mar 03 14:55:24 hi all, i would like to experiment with my fonera2n and build a firmware based on more updated kernel (maybe 2.6.26 fon now), is there some wiki to start from or do you know any quirks i have to pay attettion? Mar 03 14:55:25 yeah as i thought the wan ip of the fonera is exactly the same as the wan ip from my isp (ie what i get in whatismyip) Mar 03 14:55:47 i added the redirection but no luck damn... Mar 03 14:57:06 i'll wait a little it can take time to get the port opened Mar 03 14:59:23 hi @ all Mar 03 15:00:22 hi Mar 03 15:00:25 at the moment i'm trying to get a OpenVPN connection to my fonera. First i didn't get a gateway, now i entered it into my ipv4 config and now i can access my local network at home, but the safesurf isn't working Mar 03 15:00:52 I'm using the OpenVPN Client on Windows 7 Mar 03 15:01:09 i'll add some screenshots later when i'm back home Mar 03 15:01:23 Wilthril, yes your fonera IP can change! Mar 03 15:01:51 even if my modem is not a router and my isp gives me a static ip? Mar 03 15:02:22 now the fonera ip is the same as my wan ip so... i don't think it will change :p Mar 03 15:02:23 yes it's not the same IP, you can check from the dashbord Mar 03 15:02:31 of the fonera i mean Mar 03 15:02:46 but i've checked again and it is the same Mar 03 15:02:58 i'll post a screenshot later Mar 03 15:03:10 hmm your modem isn't a router then Mar 03 15:03:22 no it isn't ;) Mar 03 15:03:54 ah OK sorry i did not even thought about these case :D Mar 03 15:04:11 it's ok ^^ Mar 03 15:05:01 i only use the fonera as a router Mar 03 15:05:30 but i still find it weird to redirect a port to an ip like 88.131.xx.xx Mar 03 15:11:46 may anybody tell me how to configure my TAP driver on windows 7? Mar 03 15:21:41 did you followed some guide to install openvpn on 7? Mar 03 15:22:41 are you installing the 2.1 of openvpn? 2.0 is too old i think (and bugged) Mar 03 15:23:59 on my windows i have the openvpn gui 1.0.3 Mar 03 15:24:21 got it from openvpn.se Mar 03 15:24:45 On the Fonera I'm using the Openvpn client which is just installed on the DEV firmware version 2.3.0.0 Mar 03 15:32:26 i always used software from openvpn.net http://www.openvpn.net/release/openvpn-2.1.1-install.exe Mar 03 15:33:59 afaik the installer create the devide you need (to be verified) Mar 03 15:36:57 alexsc: you installed an openvpn client on the fonera? how did you do that? Mar 03 15:38:00 Hi, Wilthril i would really like to use the Fonera as an OPENVPN client, but at the moment it's not possible, you can only use her as a openvpn server atm Mar 03 15:43:07 thank you Luigi, i first thought that the version you sent to me is without an GUI ... Mar 03 15:43:07 oh ok i thought so Mar 03 16:54:18 Hello everyone... I'm new to this channel and IRC altogether so please bear with me Mar 03 16:56:38 Has anybody tried to restore the board_config on their Fonera 2.0g aka FON2202? I'm having the dreadful error showing "No board config data found!" Mar 03 17:02:23 BUMP... Anybody out there?! :) Mar 03 17:05:06 hi tbowley Mar 03 17:14:45 hi Mar 03 17:15:14 How do you do Alex? Mar 03 18:51:07 i uploaded some screenshots about my bittorrent problem Mar 03 18:51:18 the fonera dashboard informations: http://img705.imageshack.us/img705/6195/foneradashboard.jpg Mar 03 18:51:47 the firewall settings: http://img685.imageshack.us/img685/3875/fonerafirewall.jpg Mar 03 18:52:34 and the bittorrent tracker which says which port is used and if it's blocked: http://img705.imageshack.us/img705/7643/mononokeportbloque.jpg Mar 03 19:00:33 Anybody here with knowledge on RedBoot, Flash setup and missing board_config on FON 2202? Mar 03 19:01:41 i've rebooted the fonera, still the same >_<" Mar 03 22:08:42 hi guys Mar 03 22:10:45 hi Mar 03 22:11:15 i noticed that the kernel module for rt2860 (wifi device in the fonera2n rt3052 soc) is distributed as binary only (trunk/fon/ra_wifi/files/lib/modules/2.6.21/rt2860v2_ap.ko) .... Mar 03 22:12:12 someone know if it's possible to build this module starting from the RT2860PCI/mPCI/CB/PCIe(RT2760/RT2790/RT2860/RT2890) driver found on the ralink site? it contains only gpl code Mar 03 22:12:26 maybe some hack is needed? Mar 03 22:13:39 Wilthril: did you solved your torrent problem? Mar 03 22:13:48 nope Mar 03 22:14:03 i uploaded some screenshots Mar 03 22:14:13 the fonera dashboard informations: http://img705.imageshack.us/img705/6195/foneradashboard.jpg Mar 03 22:14:18 the firewall settings: http://img685.imageshack.us/img685/3875/fonerafirewall.jpg Mar 03 22:14:23 and the bittorrent tracker which says which port is used and if it's blocked: http://img705.imageshack.us/img705/7643/mononokeportbloque.jpg Mar 03 22:16:37 but why did you set source port? isn't it the port source of the remote torrent peer that connect to you? you don't know the port source Mar 03 22:17:01 you should set it to * (or whatever wildcard work for ) Mar 03 22:17:55 but i don't want to redirect everything to port 51413 Mar 03 22:18:36 yes but a client connet FROM anyport he wants... it just have to be >1024 .... very few client bind on a port Mar 03 22:18:52 very few client in all other apps i mean.... not specific to torrent Mar 03 22:19:43 ok but * or nothing is not taken Mar 03 22:19:44 how can you know if trasmission or utorrent or bittorrent use port 51413? you can only know your torrent client Mar 03 22:20:06 if you see the last screenshot it says the port used Mar 03 22:20:22 and in the fon wiki it says the same (i didn't change it) Mar 03 22:20:44 ah ok.... wait... maybe is... source port (remote peer want to connect to port x) target port (redirect to port y) .... ok in this case it is correct... sorry Mar 03 22:21:53 it's ok ^^ Mar 03 22:22:07 oh yeah i've found the wiki page about torrent downloads http://wiki.fon.com/wiki/Torrent_Client_Configuration Mar 03 22:22:56 anyway it does not make sense... a forwarding should forward to an internal ip, you are forwarding a packet with destination -> 88.163.131.160:5413 to -> 88.163.131.160:5413 Mar 03 22:23:30 the original destination is 88.163.131.160:5413 because this is the ip the other peer see you are coming from Mar 03 22:23:45 yop that's what i thought first but i don't know which ip i have to put Mar 03 22:24:16 this one doesn't work, and the fonera LAN ip neither Mar 03 22:24:17 you should put your internal ip (an internal client) or maybe the ip you use to connect to the fonera Mar 03 22:24:34 already tried it, actually it was my first try Mar 03 22:24:50 uhm... i think you don't have to forward Mar 03 22:24:55 do you have a DEV firmware? Mar 03 22:25:25 can you logon into the fonera by ssh and give a: netstat -an|grep 51413 Mar 03 22:26:51 nope i can't connect with ssh (connection refused) Mar 03 22:27:02 i have a normal firmware, not the developer one Mar 03 22:27:27 uhm... i never used bt on fonera, i got my 2 days ago :) Mar 03 22:27:51 is there a manual about bt on fonera? Mar 03 22:28:23 only the wiki page i gave you the url Mar 03 22:28:47 if bt listen on the external ip or * you shouln't create a special rule on the fw... or it shoul be created for you by default Mar 03 22:28:57 but i have a "special" contact working for FON so i'll find a way sooner or later :) Mar 03 22:29:13 oh ok Mar 03 22:29:52 will this "special" contact come here on irc? :) i would like to ask him my question about wifi module Mar 03 22:30:16 otherwise i should find a mailing list or something..... Mar 03 22:30:17 nope actually he's way too busy with only emails sorry :) Mar 03 22:30:25 and i guess he's not working now... Mar 03 22:30:31 there is Mar 03 22:31:23 mh i have the french one but i don't have a clue for other languages Mar 03 22:32:41 ok i removed the port forwarding and it's still the same Mar 03 22:33:11 i guess i'll have to get ssh to fix it... Mar 03 22:34:44 sorry i have to go to bed Mar 03 22:34:55 see ya and thanks for your help :) Mar 03 22:39:11 see ya Mar 03 22:39:15 goog night Mar 03 22:39:18 good Mar 03 23:18:15 the firewall settings: http://img685.imageshack.us/img685/3875/fonerafirewall.jpg Mar 03 23:18:21 no need for that Mar 03 23:19:21 Wilthril, configure that in this screen instead: http://wiki.fon.com/wiki/File:2.0n_2.3.0.0_Settings_Firewall_Policy.png Mar 03 23:23:06 hi all, i would like to experiment with my fonera2n and build a firmware based on more updated kernel (maybe 2.6.26 fon now), is there some wiki to start from or do you know any quirks i have to pay attettion? Mar 03 23:23:25 unfortunately not possible for the fonera 2.0n Mar 03 23:23:59 ralink supply the driver for 2.6.21 Mar 03 23:25:51 Luigi_, and it's not opensource :( Mar 03 23:26:21 uhm.... but did you know something about the pci driver? Mar 03 23:27:07 I mean, rt2860 should be the same device, I doubt they developed 2 hardware for different application and named the same.... Mar 03 23:27:31 maybe the port is not straightforward but it could be doable Mar 03 23:27:57 I looked at the code and is gpl'ed Mar 03 23:29:19 from here: http://www.ralinktech.com/support.php?s=2 Mar 03 23:30:08 the rt3052 contain a rt2860 wifi, and the sita have a rt2860 downloadable driver.... what do you think? Mar 03 23:31:29 this would enable a kernel version upgrade for the fonera2n (I admit, this is my original goal :P) Mar 03 23:33:44 hmm i guess you're talking rt2860 client driver Mar 03 23:33:49 not AP one Mar 03 23:36:11 Luigi_, what do you need kernel update for? Mar 03 23:36:41 childish hacking Mar 03 23:37:34 well many neat stuff can be done with 2.6.21 Mar 03 23:38:44 if you want the fonera to keep acting as an AP you'll have to stick to this driver :( Mar 03 23:38:49 yeah of course... but i was studying the build process and try to understand why the 2n was stuck with 2.6.21 while the 2g and openwrt was on 2.6.24(?) Mar 03 23:39:51 this is a pity.... i sent and email to ralink ask for the doc :P ok, they will say no at 99.999% Mar 03 23:43:31 even if i understand your query i would say you aren't limited by 2.6.21 yet so use your energy wisely ;) Mar 03 23:44:04 anyway... I tried the 2.6.3.0 firmware and it fixed my subnet problem! i was unable to change the netmask with the 2.3.0 Mar 03 23:44:17 now i'm looking for the next bug :P Mar 03 23:45:14 uhm... i have to give up with the kernel i would move on lua/luci, i never used lua, i'm a python fan, this is an occasion to look at it Mar 03 23:45:33 errata: IF i have to give up :) Mar 04 00:26:25 Luigi_: There are ralink drivers (rt2x00) in the mainstream kernel source, which have partial support for "rt2800pci", not sure if that supports the same chip? Mar 04 00:28:29 uhm... i have to check but i fear that inouk is right, the driver accessible from ralink is STA (station) so no AP mode... the rt2800 should be a polished version in the mainstream kernel (the driver from ralink is bugged starting from the building system :P) Mar 04 00:31:44 uhm.... but https://help.ubuntu.com/community/WifiDocs/MasterMode here says that rt2x00 support master mode! Mar 04 00:31:57 i should give it a try.... it's beta Mar 04 00:37:27 unfortunally on the rt2x00 project site there is not word about rt2860.... Mar 04 00:46:49 uhm... http://rt2x00.serialmonkey.com/phpBB/viewtopic.php?f=5&t=4200 from here it seems that works started in 2008... probably i will have to try a very current kernel. for tomorrow i have something to break :P Mar 04 00:47:13 guys, thanks for the suggestions... see ya and good night (for me :P) **** ENDING LOGGING AT Thu Mar 04 02:59:58 2010