**** BEGIN LOGGING AT Fri Nov 07 02:59:57 2008 Nov 07 08:54:06 Sleep_Walker: oh it's probably inverted just because it runs through a transisor or a NOT gate, as the CPU pin probably doens't provide enough power to drive th backlight itself Nov 07 08:54:22 Sleep_Walker: so that meeans when PWM is outputting 1 the backlight off, and when PWM is outputting 0 the backlight is on Nov 07 08:54:34 Sleep_Walker: thus the duty cycle stuff is all inverted too Nov 07 08:54:58 Sleep_Walker: we'll just have to add an invert option to the backlight driver Nov 07 08:55:37 Sleep_Walker: http://hackndev.com/trac/wiki/Treo680Hardware <-- yes outdated, please feel free to update Nov 07 08:56:37 Sleep_Walker: MAX_INTENSITY I just copied from the 650, so feel free to fix it Nov 07 09:16:15 BobOfDoom: OK! Nov 07 19:01:58 hey Nov 07 19:13:32 regarding palm centro Nov 07 19:13:50 Latest Cocoboot Works for me on a Sprint Centro CDMA with Sleep_Walker's 680 kernel and manually entering 1230 Nov 07 19:13:50 LCD registers resets the Centro. Nov 07 19:13:50 didn't try the LCD Test or the MMU dump Nov 07 19:13:51 I'm on a Mac so I used diskutil to partition my SD card: Nov 07 19:13:51 diskutil partitionDisk disk1 MBRFormat "MS-DOS" sd1 50M "MS-DOS" sd2 0b Nov 07 19:13:51 it finds the cocoboot.conf and the zImage, not using initrd Nov 07 19:13:53 I have this set in my cocoboot.conf: Nov 07 19:13:55 cmdline=root=/dev/mmcblk0p2 rootdelay=1 Nov 07 19:13:57 I get this during boot up: Nov 07 19:13:59 VFS cannot open root device "mmcblk0p2" or unknown-block (0,0) Nov 07 19:14:01 please append a correct "root=" boot option Nov 07 19:14:03 Maybe the delay isn't long enough or maybe the zImage isn't seeing the device or is it because both partitions are msdos. I read in here that sleepwalkers zImage looks for an msdos partition? is that right? if mmcblk0p2 is not the right device then what should I be looking for? how could I find out? Nov 07 19:16:55 theorian: if you can see kernel report about finding MMC and it's partitions Nov 07 19:17:19 during bootup? I'll try Nov 07 19:17:21 then you need no longer delays... Nov 07 19:19:42 theorian: oh, I forgot Nov 07 19:19:46 you use sw1? Nov 07 19:19:55 you have to use also initrd Nov 07 19:20:14 dos module is in that Nov 07 19:20:18 root=/dev/ram1 Nov 07 19:20:24 no delay neede Nov 07 19:20:25 d Nov 07 19:20:40 or you can try kEdAR's version Nov 07 19:21:16 yes using sw1, ok will use initrd on this attempt, will change that setting to /dev/ram1/ with no delay Nov 07 19:21:18 http://sleepwalker.hackndev.com/kernel-2.6/ this is my 2.6.27 Nov 07 19:21:47 http://kedar.palmlinux.cz/test/k27x/k27x.07.tar.gz this is kEdAR's Nov 07 19:21:49 I'm using http://sleepwalker.hackndev.com/kernel/ Nov 07 19:22:01 is that ok Nov 07 19:22:02 there is also initrd needed in kEdAR's Nov 07 19:22:05 ok Nov 07 19:22:22 and - if you use initrd - use my patched coco Nov 07 19:22:31 where is that Nov 07 19:22:35 http://sleepwalker.hackndev.com/cocoboot.prc Nov 07 19:22:57 I'm a bit busy right now Nov 07 19:23:02 good luck and report :) Nov 07 19:23:43 thank ou Nov 07 19:23:44 you Nov 07 19:29:23 did all of that and it locked up after zImage and initrd reported ok. maybe I'll back up a little and try some other stuff. no rush, I know your busy Nov 07 19:57:18 wow kEdAR's actually made it very gar using 1230 Nov 07 19:58:59 back for a while Nov 07 19:59:18 gar? Nov 07 20:02:58 gar? Nov 07 20:03:01 ? Nov 07 20:03:13 oh Nov 07 20:03:25 far Nov 07 20:03:32 ha Nov 07 20:04:37 well, that wasn't problem :b Nov 07 20:11:03 hmm now it's not working Nov 07 20:11:14 I only added some more squashfs files Nov 07 20:15:21 yup not werkin anymore, keeps on resetting my device Nov 07 20:15:32 lame Nov 07 21:59:07 * flyback can't find the plastic shell for his t5 usb hotsync cable he spent yesterday repairing :/ Nov 07 21:59:19 and it's not staying attached to the palm well enough to move around Nov 08 01:21:41 * flyback fixes his palm usb sync cable and prepares to mod a usb hub to be powered so he can play with palm linux usb host mode Nov 08 01:52:00 hey Nov 08 01:52:14 do I need a special build of opie for usb host mode Nov 08 02:14:20 hmm Nov 08 02:14:24 no response **** ENDING LOGGING AT Sat Nov 08 03:00:02 2008