**** BEGIN LOGGING AT Mon Apr 30 03:00:07 2018 Apr 30 04:11:36 Vipin Dev S was added by: Vipin Dev S Apr 30 10:27:21 Hello! I'm looking for a new phone. Any suggestions. Apr 30 10:32:54 @JoshuaAshton, Iphone ? Apr 30 10:33:55 Why are you in this group Apr 30 10:33:55 @JoshuaAshton, try a store. … jk … what do you want to use it for? Apr 30 10:34:04 Probably UB ports or similar Apr 30 10:34:29 ah, porting work Apr 30 10:34:48 If it should be a phone for porting, choose one with a Quallcomm chipset, a quite new kernel and LineageOS support. Apr 30 10:35:52 I'm tempted to go for One Plus One. Not necessarily too bothered about porting stuff I super don't have time. (Sorry guys) Apr 30 10:35:55 Any thoughts? Apr 30 10:36:34 @JoshuaAshton, Look for the ones with official support Apr 30 10:43:38 @abhishek_0, Oi you, enough with the swearing ;) Apr 30 10:44:24 (Sticker, 512x512) https://irc.ubports.com/ai2d0Uu0.webp Apr 30 10:44:39 He asked for a phone... And didn't tell the purpose Apr 30 10:44:44 Stop the offtop please Apr 30 10:44:58 It has nothing to do with halium Apr 30 10:46:31 @vanyasem, Thank you very much for spelling out in exacting detail the point I was attempting to use humour to make Apr 30 11:02:48 Miguel Pires was added by: Miguel Pires Apr 30 11:19:17 Ismail_ibn_Thomas_Al_Amreeki was added by: Ismail_ibn_Thomas_Al_Amreeki Apr 30 11:28:22 Olav1 was added by: Olav1 Apr 30 12:14:00 welcome everyone Apr 30 12:14:01 anyone needs help? Apr 30 12:14:05 i am bored Apr 30 12:27:22 @vanyasem, Coffee can solve this. Apr 30 12:54:17 @vanyasem, I have a Halium port, that drives me crazy. It does not boot. It did once, but suddently stopped booting again... Apr 30 12:54:59 @jonny, okay let's get started Apr 30 12:55:03 are you ready to fix it now? Apr 30 12:55:31 https://github.com/Halium/projectmanagement/issues/47 Apr 30 12:55:51 Unfortunately I am at work right now and my time is very limited. Apr 30 12:56:06 @jonny, can you boot into telnet Apr 30 12:57:58 I was using hybris-boot and could not reach the device via telnet. Then I switched to halium-boot and got a telnet connection. And then it mystically stopped booting again and I could not reach the device via telnet. I have spend hours building and testing hybris- and halium-boot, flashing and so on. Apr 30 12:58:14 @jonny, have you tried building `hybris-recovery`? Apr 30 12:58:34 Nope Apr 30 12:58:48 try it Apr 30 12:58:57 it's a boot image (even if it says recovery) Apr 30 12:59:31 Mh, actually I am not quite sure anymore. Maybe I have tried it already. But I will do again, once I find time to do it. Apr 30 13:00:06 @jonny, well your device should boot into telnet even if your rootfs and system.img are incorrect ;) Apr 30 13:00:19 so it's a matter of finding out why isn't the boot image is working Apr 30 13:00:37 kernel is 3.4, so it's not an issue with it Apr 30 13:00:55 3.10 and 4.4 are known to cause issues Apr 30 13:01:46 I suspect that I did something "wrong" or at least differently when I got the telnet connection. But I have no glue what that could be... Apr 30 13:02:04 Once I get my hands on the device again, I'll bug you. 😉 Apr 30 13:02:34 i haven't worked with halium-boot much, but i can help you with hybris Apr 30 13:02:47 have you corrected all kernel options? Apr 30 13:03:01 have you tried both ubports and mer config checkers? Apr 30 13:03:19 if you haven't tried ubports one, i suggest you to do it (there are conflicts, prefer what mer checker suggests) Apr 30 13:17:41 Eric Van Deurzen was added by: Eric Van Deurzen Apr 30 13:46:09 @vanyasem, yes Apr 30 13:46:17 @vanyasem, I do not remember Apr 30 13:46:26 well check that :P Apr 30 13:46:48 The git repository at least doesn't contain the UBports check-config changes. Apr 30 13:47:12 So: … -hybris-recovery … -ubports config checker … -mer config checker Apr 30 13:47:31 yeah, that for short-term Apr 30 13:47:40 keep me informed (you can safely ping me any time, i don't mind) Apr 30 13:48:04 And additionally, try to fix the values that are dplicated in the kernel defconfig. Apr 30 13:48:30 @JBBgameich, Ubports config checker detects them iirc Apr 30 13:49:06 That's cool. Ok, one step less Apr 30 13:49:45 Btw, this are the values that are overriden: https://paste.kde.org/ptm6j34dz Apr 30 14:01:59 Hi everyone Apr 30 14:02:05 @mayltonfnds, Hello Apr 30 14:02:05 I'm back again 😅 Apr 30 14:03:15 Ivan, I did the things you asked me to yesterday. Now, what should we do with it? Apr 30 14:03:44 @mayltonfnds, You can't just assume that i remember everything i told you yesterday Apr 30 14:04:08 I do not assume it Apr 30 14:04:21 I am here exactly to remember you Apr 30 14:04:23 @vanyasem, Okay found it Apr 30 14:05:02 I need to check your trees and you will have to rebuild halium with your new fixup mountpoints Apr 30 14:05:31 Sure Apr 30 14:08:47 @mayltonfnds set default branch for all of your repos to "halium-7.1" Apr 30 14:08:52 in github repo settings Apr 30 14:10:53 where are your commits to kernel @mayltonfnds Apr 30 14:12:51 also question, which androidrom you had before trying to build halium? Apr 30 14:12:55 [Edit] also question, which android rom you had before trying to build halium? Apr 30 14:16:21 @vanyasem, I thought I had pushed them before. Just a second. Apr 30 14:16:54 @vanyasem, I was using a stock-based rom with android 6 Apr 30 14:17:03 @mayltonfnds, may i ask you a question Apr 30 14:17:21 why were you running Android 6 if you are porting halium based on Android 7.1? Apr 30 14:17:25 [Edit] why were you running Android 6 if you are porting halium based on Android 7.1?.. Apr 30 14:17:26 [Edit] why were you running Android 6 if you are porting halium based on Android 7.1?. Apr 30 14:17:37 please install LOS 7.1 before trying to run halium Apr 30 14:17:52 [Edit] why were you running Android 6 if you are porting halium based on Android 7.1? Apr 30 14:18:25 @vanyasem, Do you think that's important? Apr 30 14:18:31 Well, I always format my storage before installing halium Apr 30 14:18:37 @ilyaishere, it is when a device has a firmware partition Apr 30 14:18:48 it won't work if you have blobs from a different android version Apr 30 14:18:52 Hmm Apr 30 14:19:02 mtk devices don't have that partition, so it's not important to them Apr 30 14:19:05 iirc you work on mtk Apr 30 14:19:09 [Edit] mtk devices don't have that partition, so it's not important for them Apr 30 14:19:15 @vanyasem, No thanks :D Apr 30 14:19:24 i faced that issue before myself and was bashing my head with that issue Apr 30 14:19:28 @ilyaishere, intel? Apr 30 14:19:41 But I have blobs in /system, so you're probably right Apr 30 14:19:45 @vanyasem, Yep Apr 30 14:20:05 :P Apr 30 14:20:46 @vanyasem, Does blobs remains after a format? Apr 30 14:20:51 I mean Apr 30 14:20:59 @mayltonfnds, yes, you can't format /firmware from twrp Apr 30 14:21:02 just do as i say Apr 30 14:21:11 Ok Apr 30 14:22:37 Just a thought: Do I have to install halium without formating storage and keep LOS14.1, or do i have to install LOS14.1, format, and then run halium? Apr 30 14:22:45 fool question, but just to be sure Apr 30 14:22:52 @mayltonfnds, you only need to format data and cache iirc Apr 30 14:22:59 Oh, great Apr 30 14:23:01 you can keep your /system intact, halium doesn't use that partition Apr 30 14:36:02 I've just pushed my commit for kernel Apr 30 14:39:14 @mayltonfnds, plz fix kernel Apr 30 14:39:26 ubports checkconfig found 213 errors Apr 30 14:39:37 `Config file checked, found 213 errors that I did not fix.` Apr 30 14:40:04 How come? Apr 30 14:40:09 let me check again Apr 30 14:40:19 you have to use both mer and ubports checker Apr 30 14:40:32 you can use "-w" with ubports checker to automatically fix issues Apr 30 14:40:36 i lost a link to it Apr 30 14:41:03 It's in here: https://github.com/halium/halium-boot Apr 30 14:41:05 @vanyasem, I didn't know that Apr 30 14:41:07 check-kernel-config Apr 30 14:41:22 thank you dalton i was hoping you would hop in :P Apr 30 14:41:25 I don't know why you'd have to use both, but I'm also afraid to question you at this point Apr 30 14:41:30 @UniversalSuperBox, I was gonna post that .. 20 sec too late :P Apr 30 14:41:47 * vanyasem goes to the shower Apr 30 14:41:54 * mayltonfnds Apr 30 14:44:27 Oh and they have conflicts Apr 30 14:44:45 Prefer what mer checker says Apr 30 14:54:18 Yeah Apr 30 14:54:31 I was going to say that Apr 30 14:54:56 I think ubports checker disabled some settings which were recommended by mer checker Apr 30 15:04:17 I have fixed all errors found by mer-checker and most of ubports-checker Apr 30 15:04:30 o you want me to commit them? Apr 30 15:04:43 [Edit] Do you want me to commit them? Apr 30 15:05:06 If the kernel still builds, comit them. Apr 30 15:05:11 [Edit] If the kernel still builds, commit them. Apr 30 15:05:41 If the kernel fails to build, better fix that first. Apr 30 15:07:46 got it Apr 30 15:08:00 @mayltonfnds, What is your kernel version Apr 30 15:08:30 do you mean it's version? Apr 30 15:09:02 Kernel version .. what kernel is that? Apr 30 15:09:50 It's 3.18 https://github.com/maylton/android_kernel_leeco_msm8996 Apr 30 15:10:21 @mayltonfnds, Oh then you're safe .. :-) go ahead Apr 30 15:13:41 kernel built successfully. I'm pushing a commit now =) Apr 30 15:19:15 I had to remove hs20-osu-client from device/leeco/msm8996-common/msm8996.mk Apr 30 15:19:40 Do you think that might cause some problem related to wifi? Apr 30 15:39:41 idk never faced that. it's usually okay to comment out confliciting stuff from the tree Apr 30 15:39:49 don't forget to commit it Apr 30 15:40:05 Just did that Apr 30 15:40:17 I think I've done everything Apr 30 15:40:21 nice my brother Apr 30 15:40:31 if you find out that it breaks something, revert the commit Apr 30 15:40:31 I'm resyncing my repo Apr 30 15:40:42 rebuild and let me know if it works Apr 30 15:40:49 Ok Apr 30 15:40:52 if not, i will come up with more steps Apr 30 15:41:02 i hate doing stuff myself, i am a manager in my blood Apr 30 15:41:04 [Edit] i hate doing stuff myself, i am a manager in my DNA Apr 30 15:41:23 I see 😅 Apr 30 15:41:43 You've helped me a lot so far Apr 30 15:42:08 Many people have helped me tbh Apr 30 15:42:27 I'm deeply grateful to all 😁 Apr 30 15:45:21 @vanyasem, Manager @ 15.. ?? Interesting.. Apr 30 15:45:46 @technicalbird, my family tree consists of teachers and managers :P Apr 30 15:45:54 we teach and manage :P Apr 30 18:45:54 Hello again Apr 30 18:46:20 I am unable to get telnet even with hybris-recovery Apr 30 18:47:02 Fun fact: My 3.18 kernel doesn't boot with the UBports check-config options. Apr 30 18:47:59 Nice 😅 Apr 30 18:48:01 So I have to revert my changes Apr 30 18:51:15 @JBBgameich, Can't agree. Mine does Apr 30 18:51:52 @vanyasem, Might be a device specific problem, I just wanted to report it in case it helps. Apr 30 18:52:47 @mayltonfnds, Not necessarily, but you could try if it works without the UBports changes to debug the first boot. Apr 30 18:53:31 but don't I need to undo that changes? Apr 30 18:55:18 For debugging, but don't delete them entirely as you'll need them later again. Apr 30 18:55:45 sure Apr 30 19:33:53 Now it works Apr 30 19:34:11 So it was the UBports check-config? Apr 30 19:34:20 Yes Apr 30 19:34:42 I make my defconfig just as before adding them Apr 30 19:40:35 @JBBgameich I used your installer to install halium this time btw Apr 30 19:46:09 Cool :) Apr 30 19:52:10 I'm to the point I stopped before Apr 30 19:55:40 https://paste.ubuntu.com/p/Q2fdXDTn6p/ Apr 30 19:55:55 [Edit] I'm back to the point I stopped before Apr 30 19:58:00 What does ```lxc-checkconfig````say? Apr 30 19:58:06 [Edit] What does ```lxc-checkconfig```say? Apr 30 19:58:06 [Edit] What does … ```lxc-checkconfig``` … say? Apr 30 19:58:45 @mayltonfnds, Have you installed LOS 14.1? Apr 30 19:59:13 @vanyasem, Yes. I installed and format data and cache leaving system Apr 30 19:59:40 @JBBgameich, https://paste.ubuntu.com/p/PzRT3zdTWt/ Apr 30 20:00:38 @mayltonfnds, Okay, that doesn't seem to be the problem .. Apr 30 20:01:13 Do you need to see mount output? Apr 30 20:01:54 Honestly I don't know about the mount stuff either since my device doesn't have a seperate firmware partition. Apr 30 20:02:08 I see Apr 30 20:08:13 Do you think my partitions are getting encrypted somehow an that might be causing the problem? Apr 30 20:09:09 If they were encrypted the rootfs wouldn't even start. Apr 30 20:09:30 I see... Apr 30 20:09:40 Sorry, currently I don't really have an idea ... Apr 30 20:09:41 I have no idea so Apr 30 20:10:05 @JBBgameich, no problem Apr 30 20:37:11 I got a log, but I'm not sure it gonna help Apr 30 20:37:33 https://paste.ubuntu.com/p/NGWKshXgsQ/ Apr 30 20:38:25 the error repeats more than 700 times... Apr 30 20:39:12 [Edit] the error repeats more than 500 times... Apr 30 20:42:23 It ends with this: https://paste.ubuntu.com/p/7g8FhGbMnB/ Apr 30 22:10:09 Guys, I also hardly believe that my phone is encrypted, because when I install Magisk (for root) is says "encrypted data partition detected" Apr 30 22:10:41 but why it's getting encrypted is a mystery for me Apr 30 22:10:47 Do you mean that you DO believe that your phone is encrypted? Apr 30 22:11:06 I assume it Apr 30 22:11:36 [Edit] I assume it is Apr 30 22:12:10 I DID NOT encrypt it myself Apr 30 22:13:06 format data from twrp Apr 30 22:13:16 the button that required you to enter "yes" Apr 30 22:13:19 it will decrypt it Apr 30 22:13:30 installing any android rom will encrypt the phone Apr 30 22:13:40 @vanyasem, I did that. It didn't work and I am even more lost because of that Apr 30 22:13:56 how have you formatted it Apr 30 22:14:06 have you entered “yes”? Apr 30 22:14:19 Surely Apr 30 22:14:31 then it’s decrypted Apr 30 22:14:41 booting android encrypts it Apr 30 22:14:54 It shouldn't Apr 30 22:15:00 if twrp doesn’t prompt you to enter you password on start, then it’s decrypted Apr 30 22:15:06 don’t get confused here Apr 30 22:15:13 I never used my phone encrypted before Apr 30 22:15:27 probably false Apr 30 22:15:35 it’s supposed to come pre-encrypted Apr 30 22:15:49 anyways, we’re not android devs here. just keep in mind what i said above Apr 30 22:16:14 NB for me, reinstalling LineageOS did not re-encrypt the device Apr 30 22:16:22 Not saying that's universal though Apr 30 22:16:46 We're in a land where every device, every installation has its own quirks, it would seem Apr 30 22:16:46 @reivilibre, that's what I'm saying Apr 30 22:18:43 I'm not sure how much we can trust Magisk unless it provides some kind of reasoning for what it says Apr 30 22:19:09 When I tried to boot LOS with ext4, I got a warning that my data was 'encrypted but corrupt' and I would have to factory reset Apr 30 22:19:21 hint: it wasn't encrypted, it just wanted f2fs Apr 30 22:20:10 Many devices force encryption. It's normal Apr 30 22:20:21 Happens when Android boots. Apr 30 22:20:22 Oh it works without encryption (but only with f2fs) Apr 30 22:20:36 @UniversalSuperBox, and some don’t. exactly what i was talking about Apr 30 22:20:59 ext4 it told me quasi-quoted: 'Your password is correct but unfortunately your data is corrupt. You may be able to retrieve backed-up data from your Google Account' Apr 30 22:21:00 If you "format data" and don't boot Android again, your device isn't encrypted. Apr 30 22:21:28 [Edit] ext4 it told me quasi-quoted: 'Your password is correct but unfortunately your data is corrupt. You may be able to retrieve backed-up data from your Google Account' and to factory reset Apr 30 22:21:39 @mayltonfnds you could not trust me, but do you trust dalton? :) Apr 30 22:22:26 Ok Apr 30 22:22:59 I tried a different twrp with f2fs support **** ENDING LOGGING AT Tue May 01 03:00:05 2018