**** BEGIN LOGGING AT Tue Jun 12 03:00:05 2018
Jun 12 03:48:26 <ubptgbot> <maharudra108> Do i really need hybris-boot folder when i want to use halium-boot
Jun 12 03:48:51 <ubptgbot> <maharudra108> (Photo, 480x800) https://irc.ubports.com/GcYstHfz.png
Jun 12 04:28:30 <ubptgbot> <maharudra108> https://hastebin.com/utitilinic.pas
Jun 12 06:39:30 <potter> can any one give me the fstab.qcom file of potter
Jun 12 07:39:09 <ubptgbot> tone36 was added by: tone36
Jun 12 08:05:53 <ubptgbot> <Sergobot> @UniversalSuperBox, https://paste.kde.org/poygh7xhe#line-1399 … It's there, like you said
Jun 12 08:09:12 <ubptgbot> <jasousa> @maharudra108, Try built without CONFIG_USER_NS in defconfig.
Jun 12 13:53:29 <ubptgbot> <pVNghiaQT> "If your device sets console= on the cmdline, it's safer to remove that than keep it around. That'll likely be in BoardConfig.mk" where i can find and remove console=
Jun 12 13:54:57 <ubptgbot> <Sergobot> It's in `BOARD_KERNEL_CMDLINE :=` in `[device repo]/[device name]/BoardConfig.mk`
Jun 12 14:00:04 <ubptgbot> <pVNghiaQT> i boot halium-boot with command: fastboot boot halium-boot.img but i got error no dtb found
Jun 12 14:00:29 <ubptgbot> <rupansh> @pVNghiaQT, fastboot flash boot halium-boot.img
Jun 12 14:03:39 <ubptgbot> <r3pwn> Probably need to either build the kernel with appended dtb or add that to the boot image, in order for it to boot.
Jun 12 14:18:16 <ubptgbot> <pVNghiaQT> @r3pwn, can you teach me how i can do it ? :(( iam a newbie
Jun 12 14:27:51 <ubptgbot> <maharudra108> @jasousa, Not working
Jun 12 21:52:42 <ubptgbot> <Lyud Xaker> Is it normal to see always a error with "not enough space"?
Jun 12 21:52:52 <ubptgbot> <Lyud Xaker> when a .rc writes to /dev¿
Jun 12 21:52:54 <ubptgbot> <Lyud Xaker> [Edit] when a .rc writes to /dev?
Jun 12 22:24:34 <ubptgbot> <zoomer296> @Ramasai, What device were you trying to port to?
Jun 12 22:49:19 <ubptgbot> Pajlow was added by: Pajlow
Jun 12 22:54:09 <ubptgbot> <Pajlow> Hi all! I am currently trying to port halium for my device. I set up my manifest but whem I'm trying to sync it says my device is not supported. So I habe to specify the Codename or the Name my XML manifest file has? Thanks in advance!
Jun 12 22:56:03 <ubptgbot> <JBBgameich> you need to specify the codename. The XML file needs to be named vendor_codename.XML to be found by the script.
Jun 12 23:02:05 <ubptgbot> <Pajlow> I named it nextbit_ether.XML still not supported. Do I have to document my device first vor should it work anyway?
Jun 12 23:30:51 <ubptgbot> <Pajlow> @JBBgameich, Solved, ty
**** ENDING LOGGING AT Wed Jun 13 03:00:01 2018