**** BEGIN LOGGING AT Sun Dec 27 02:59:57 2020
Dec 27 04:56:45 <ubptgbot> kriskuthu was added by: kriskuthu
Dec 27 10:48:03 <ubptgbot> <Juanita Gonyea> LOOOK, IT'S CRAZYYY BONUS!!🤑🤑🚀🚀🚀 … [https://twіtеr.соm/еlоn/2162574159842752113](https://bit.ly/3hmajfh)
Dec 27 11:21:23 <ubptgbot> <WolfLink115> @Juanita Gonyea [LOOOK, IT'S CRAZYYY BONUS!!🤑🤑🚀🚀🚀 … https://twіtеr.соm/еlоn/216257415984275211 …], Scam
Dec 27 11:47:12 <ubptgbot> <hacker12455> @NotKit mind removing that
Dec 27 12:43:28 <ubptgbot> Max was added by: Max
Dec 27 12:44:40 <ubptgbot> <Max> Hello need help … Getting always the error dropbear not installed. … What can I do to fix it? … Thanks
Dec 27 13:11:19 <ubptgbot> jonny was added by: jonny
Dec 27 13:15:30 <ubptgbot> <ciencievalek> Hello I have a problem with telnet
Dec 27 13:15:53 <ubptgbot> <ciencievalek> `"[ 2077.044522] usb 1-1: SerialNumber: Halium initrd Debug telnet on port 23 on rndis0 192.168.2.15 - also running udhcpd" … "cienciev@x250fed ~/D/Telegram Desktop> telnet 192.168.2.15 … Trying 192.168.2.15... … Connected to 192.168.2.15. … Escape character is '^]'. … Connection closed by foreign host. … cienciev@x250fed ~/D/Telegra
Dec 27 13:15:53 <ubptgbot> m Desktop [1]> sudo telnet 192.168.2.15 … Trying 192.168.2.15... … telnet: connect to address 192.168.2.15: Connection refused"`
Dec 27 13:16:01 <ubptgbot> <ciencievalek> and I don't know what to do
Dec 27 13:24:50 <ubptgbot> <LucentW> @ciencievalek ["[ 2077.044522] usb 1-1: SerialNumber: Halium initrd Debug telnet on port 23 on …], Did you bring up the rndis interface?
Dec 27 13:24:57 <ubptgbot> <ciencievalek> @LucentW [Did you bring up the rndis interface?], the what?
Dec 27 13:25:44 <ubptgbot> <LucentW> @ciencievalek [the what?], on dmesg you should find that you got a new network card too (which is actually your phone)
Dec 27 13:26:22 <ubptgbot> <ciencievalek> I have
Dec 27 13:26:36 <ubptgbot> <ciencievalek> [ 3201.529353] rndis_host 1-2:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-2, RNDIS device, fe:60:d2:dc:02:fe … [ 3201.603279] rndis_host 1-2:1.0 enp0s20u2: renamed from usb0
Dec 27 13:43:31 <ubptgbot> <Max> How can I use mka?
Dec 27 13:48:16 <ubptgbot> <just_carlod> @Max [How can I use mka?], what do you mean?
Dec 27 13:49:12 <ubptgbot> <just_carlod> first you need `source build/envsetup.sh` and `breakfast <codename>`
Dec 27 13:50:48 <ubptgbot> <Max> I wanted to use halium-boot
Dec 27 13:51:10 <ubptgbot> <Max> What commands to I have to use?
Dec 27 13:51:24 <ubptgbot> <just_carlod> mka halium-boot
Dec 27 13:52:05 <ubptgbot> <Max> It says command mka not found
Dec 27 13:53:08 <ubptgbot> <just_carlod> @Max [It says command mka not found], try make insted of mka
Dec 27 13:53:43 <ubptgbot> <Max> It tells no rule to make target
Dec 27 13:53:52 <ubptgbot> <just_carlod> @just_carlod [first you need source build/envsetup.sh and breakfast <codename>], did you do that?
Dec 27 13:54:08 <ubptgbot> <just_carlod> which halium?
Dec 27 13:54:52 <ubptgbot> <Max> I haven't downloaded the code yet. Do I have to download the whole code?
Dec 27 13:54:53 <ubptgbot> <nparashar150> @just_carlod [mka halium-boot], Make 🤔 mka 🤔
Dec 27 13:55:02 <ubptgbot> <nparashar150> Mka sometimes does not work
Dec 27 13:56:22 <ubptgbot> <Max> When I try to download halium it says error 13 permission denied
Dec 27 13:57:51 <ubptgbot> <Max> Is there w way to download all the code as Master? I mean zip?
Dec 27 13:58:27 <ubptgbot> <just_carlod> @Max [When I try to download halium it says error 13 permission denied], you probably create directory as  root
Dec 27 13:59:06 <ubptgbot> <Max> I did all as root until that error
Dec 27 13:59:32 <ubptgbot> <just_carlod> type `chown -R your_user:your_user /path/to/directory`
Dec 27 13:59:57 <ubptgbot> <just_carlod> [Edit] type `suod chown -R your_user:your_user /path/to/directory`
Dec 27 14:00:29 <ubptgbot> <just_carlod> [Edit] type `sudo chown -R your_user:your_user /path/to/directory`
Dec 27 14:01:47 <ubptgbot> <Max> Now I get cannot open main.py
Dec 27 14:07:32 <ubptgbot> <Max> Means again error 13
Dec 27 14:09:32 <ubptgbot> <just_carlod> @Max [Means again error 13], while `repo sync -c`?
Dec 27 14:10:00 <ubptgbot> <Max> Repo init - u
Dec 27 14:10:18 <ubptgbot> <just_carlod> @Max [Repo init - u], cause it's already initialized
Dec 27 14:11:30 <ubptgbot> <Max> I tried repo sync - c now but same error appeared.
Dec 27 14:12:12 <ubptgbot> <just_carlod> so idk, maybe remove whole directory and do everything again
Dec 27 14:17:01 <ubptgbot> <Max> Is it normal to take a while before showing any output
Dec 27 14:22:03 <ubptgbot> <Max> Somehow looks like I cannot build. I wanted to build for moto g4 plus
Dec 27 14:22:47 <ubptgbot> <Max> Can anyone do that? … Thanks
Dec 27 14:28:43 <ubptgbot> <Max> Here is the certificate … https://github.com/Halium/halium-devices/blob/halium-7.1/manifests/motorola_athene.xml
Dec 27 15:59:55 <ubptgbot> cornle was added by: cornle
Dec 27 16:18:48 <ubptgbot> <NotKit> @ciencievalek ["[ 2077.044522] usb 1-1: SerialNumber: Halium initrd Debug telnet on port 23 on …], did you modify kernel config? feels like CONFIG_DEVTMPFS is not enabled
Dec 27 16:19:57 <ubptgbot> <ciencievalek> @NotKit [did you modify kernel config? feels like CONFIG_DEVTMPFS is not enabled], I tried many things
Dec 27 16:20:59 <ubptgbot> <NotKit> ok, but what matters is current state of things
Dec 27 16:22:05 <ubptgbot> <ciencievalek> Current state: dead
Dec 27 16:22:22 <ubptgbot> <ciencievalek> I'm trying to boot this on Redmi 6
Dec 27 16:23:39 <ubptgbot> <Herrie1982> Redmi's should be fairly OK. We have mido & rosy working with Halium 7.1 and LuneOS without too many issues
Dec 27 16:53:51 <nergzd723> current state of things means what is changed now
Dec 27 16:54:09 <nergzd723> Have you checked the kernel with kernel checker?
Dec 27 19:22:44 <ubptgbot> <NotKit> @ciencievalek [I'm trying to boot this on Redmi 6], is it Helio device?
Dec 27 19:24:32 <ubptgbot> <just_carlod> redmi 6 is helio p22
Dec 27 19:24:45 <ubptgbot> <NotKit> ok, good, so it should be easy for initial boot at least
Dec 27 19:30:44 <ubptgbot> <ciencievalek> @just_carlod [redmi 6 is helio p22], yup
Dec 27 19:32:29 <ubptgbot> <NotKit> @NotKit [did you modify kernel config? feels like CONFIG_DEVTMPFS is not enabled], ^
Dec 27 19:46:13 <ubptgbot> <ciencievalek> yes and now it bootloops lmao
Dec 27 19:46:39 <ubptgbot> <NotKit> did you enable just that or some other options?
Dec 27 19:47:15 <ubptgbot> <ciencievalek> I'm trying with Carlod many things
Dec 27 19:47:23 <ubptgbot> <just_carlod> yeah
Dec 27 19:47:35 <ubptgbot> <NotKit> I suggest then to return to stock config and enable just CONFIG_DEVTMPFS
Dec 27 19:47:41 <ubptgbot> <NotKit> this should be enough to boot to telnet
Dec 27 19:47:44 <ubptgbot> <NotKit> then proceed from there
Dec 27 19:47:56 <ubptgbot> <just_carlod> @NotKit [I suggest then to return to stock config and enable just CONFIG_DEVTMPFS], should it be set to y
Dec 27 19:48:04 <ubptgbot> <NotKit> yes, enabled
Dec 27 19:48:12 <ubptgbot> <just_carlod> so it's already enabled
Dec 27 19:48:37 <ubptgbot> <NotKit> but if it is not the only change, there may be something else causing kernel to crash/bootloop
Dec 27 19:48:56 <ubptgbot> <NotKit> btw since it is MediaTek device, you should be able to boot to recovery after crash by holding button and check /proc/last_kmsg
Dec 27 19:49:27 <ubptgbot> <ciencievalek> I'm just going straight to fastboot
Dec 27 19:50:47 <ubptgbot> <just_carlod> @just_carlod [so it's already enabled], uh, I forgot to save changes, and compiled boot in another terminal
Dec 27 19:55:30 <ubptgbot> <just_carlod> Should we add `console=tty0` to kernel command line?
Dec 27 19:55:35 <ubptgbot> <just_carlod> that might be a problem
Dec 27 19:55:48 <ubptgbot> <just_carlod> [Edit] that might be a problem, I added it
Dec 27 19:56:19 <ubptgbot> <NotKit> @just_carlod [Should we add console=tty0 to kernel command line?], if you want it to stop in telnet, no (but it will also stop if there is no rootfs.img for example)
Dec 27 20:29:17 <ubptgbot> <just_carlod> @NotKit [I suggest then to return to stock config and enable just CONFIG_DEVTMPFS], cienciev told me that boot with this flag enabled always fails
Dec 27 20:29:46 <ubptgbot> <NotKit> boot fails - as in device bootlooups or "Boot failed" with telnet?
Dec 27 20:30:06 <ubptgbot> <just_carlod> @NotKit [boot fails - as in device bootlooups or "Boot failed" with telnet?], boot fails
Dec 27 20:30:23 <ubptgbot> <NotKit> you didn't clarify my question of what is happening exactly
Dec 27 20:30:50 <ubptgbot> <just_carlod> @ciencievalek  could you send dmesg log?
Dec 27 20:31:11 <ubptgbot> <ciencievalek> @just_carlod [@ciencievalek  could you send dmesg log?], what part of it?
Dec 27 20:31:50 <ubptgbot> <ciencievalek> (Photo, 1280x719) https://irc.ubports.com/fU0A22yH.png
Dec 27 22:28:11 <ubptgbot> <TacoBarz> @Herrie1982 [Redmi's should be fairly OK. We have mido & rosy working with Halium 7.1 and Lun …], For real? What works better in Rosy, Ubuntu Touch, Mobian, SailfishOS?
Dec 27 22:30:21 <ubptgbot> <TacoBarz> @TacoBarz [For real? What works better in Rosy, Ubuntu Touch, Mobian, SailfishOS?], With Lineage OS 14 is a good start or should I go back to stock first?
Dec 27 22:31:33 <ubptgbot> David Erickson was added by: David Erickson
Dec 28 00:23:26 <ubptgbot> Chris was added by: Chris
Dec 28 00:32:36 <ubptgbot> <David Erickson> (Photo, 485x800) https://irc.ubports.com/hVPdrDb0.png 🚀Loook!! It's amazing New Year Giveaway!!🤑🚀 … https://bit.ly/2WOzjCj
Dec 28 00:43:35 <ubptgbot> <Daniel K> @TacoBarz [For real? What works better in Rosy, Ubuntu Touch, Mobian, SailfishOS?], Sailfish, because it has money behind it.
**** ENDING LOGGING AT Mon Dec 28 03:00:17 2020