**** BEGIN LOGGING AT Sun Mar 28 02:59:56 2021 Mar 28 05:49:30 Deepak singh was added by: Deepak singh Mar 28 05:49:39 Hello Mar 28 06:05:02 salclem2 was added by: salclem2 Mar 28 07:52:19 @Mathew Dennis [http://Pastebin.ubuntu.com/p/n2gdBYh6kT], Can anyone look into thiss plz Mar 28 08:15:01 @Mathew Dennis [Can anyone look into thiss plz], `lxc-checkconfig` Mar 28 08:24:57 @vince1171 [lxc-checkconfig], Plz explain a bit moree...thankyou Mar 28 08:30:26 @vince1171 [lxc-checkconfig], Hyy Mar 28 08:35:26 (Photo, 1280x720) https://irc.ubports.com/fxx0U91X.png Good day. Can you please tell me what could be the problem when assembling a halium-boot? Mar 28 08:37:23 @Daniel K [Try being a romantic, that will fix the wife issues.], lmao🤣🤣 Mar 28 09:02:04 @Mathew Dennis [Plz explain a bit moree...thankyou], Execute the `lxc-checkconfig` command on your device … If any line with a "CONFIG_*" is set to required or missing, you need to set this CONFIG_* to Y in your defconfig Mar 28 09:50:31 ajqjwuuqbana041 was added by: ajqjwuuqbana041 Mar 28 09:50:47 Must I need LineageOS for my device to port Halium? Mar 28 10:43:50 @NotKit [Wi-Fi should work once you have modules firmware/loaded properly], The driver was built-in. … But it doesnt work either. Mar 28 11:21:14 @ajqjwuuqbana041 [Must I need LineageOS for my device to port Halium?], Not necessarily … But it can be harder than if you had one Mar 28 11:22:07 @vince1171 [Not necessarily … But it can be harder than if you had one], Where can I find instructions if I don't have it. Halium porting guide has a part for LOS. What will I do instead of that? Mar 28 11:25:50 There are no instructions … You'll need to find your device repos like device tree, kernel repo, vendor/blob repo … And follow the halium porting docs but instead of using LOS repos, you'll use yours … Be prepared to face some issue as LOS tend to clean vendor repos of their "hacky" stuff Mar 28 11:26:32 [Edit] There are no instructions … You'll need to find your device repos like device tree, kernel repo, vendor/blob repo … And follow the halium porting docs but instead of using LOS repos, you'll use yours … Be prepared to face some issues as LOS tend to clean vendor repos of their "hacky" stuff Mar 28 11:26:57 @ajqjwuuqbana041 which device is that? is it Treble or not? Mar 28 11:27:22 @NotKit [@ajqjwuuqbana041 which device is that? is it Treble or not?], It is Redmi 8A Mar 28 11:28:00 see https://github.com/ubports/porting-notes/wiki/Generic-system-image-(GSI) and https://github.com/ubports/porting-notes/wiki/GitLab-CI-builds-for-devices-based-on-halium_arm64-(Halium-9) Mar 28 11:28:19 @NotKit [see https://github.com/ubports/porting-notes/wiki/Generic-system-image-(GSI) and …], thx :D Mar 28 12:14:23 @NotKit [see https://github.com/ubports/porting-notes/wiki/Generic-system-image-(GSI) and …], Do I only follow this? I don't need to follow the Halium porting guide at all? Mar 28 12:15:05 basically you need to build kernel with modified defconfig, then try to boot GSI image Mar 28 12:15:11 ignore most of Halium guide, yes Mar 28 12:15:38 debugging section will be still relevant though Mar 28 12:23:39 @Sunflower2333 [The driver was built-in. … But it doesnt work either.], In my case it doesn't seem to connect with vendor/firmware/wlan/qca_cld/WCNSS_con fig.iniquities and Wifi mac bin whatever Mar 28 12:24:30 WCNSS_config.iniquities and Wifi mac.bin Mar 28 12:24:42 Grr Mar 28 12:37:42 @NotKit [basically you need to build kernel with modified defconfig, then try to boot GSI …], Though the guide is from UBports, can I use other UIs with the Halium configured via this guide? Mar 28 12:38:00 only with Hybris-Mobian Mar 28 12:38:21 Plasma Mobile dropped Halium support and didn't get Android 9 support before Mar 28 12:39:06 @NotKit [only with Hybris-Mobian], So, if I had LineageOS, I could try more? I have an unofficial LOS GSI rom for my device though. Mar 28 12:39:24 @ajqjwuuqbana041 [So, if I had LineageOS, I could try more? I have an unofficial LOS GSI rom for m …], same issue, doesn't depend on LineageOS Mar 28 12:39:37 what do you want to port exactly? Mar 28 12:40:02 @NotKit [what do you want to port exactly?], Primarily, Ubuntu Touch. But, also will try other UIs. Mar 28 12:40:27 @NotKit [same issue, doesn't depend on LineageOS], But,I can't realize why you said,"Only hybris-mobian" :/ Mar 28 12:40:52 because it's not as simple as trying "other UIs" Mar 28 12:41:23 current other projects that support Halium besides Ubuntu Touch are LuneOS and Hybris-mobian Mar 28 12:41:36 LuneOS should work too, but I think they have their own procedure Mar 28 12:41:52 @NotKit [current other projects that support Halium besides Ubuntu Touch are LuneOS and H …], Oh, ok. So, the issue is different. Thx for helping so far. Mar 28 14:14:11 uisandeep was added by: uisandeep Mar 28 14:17:35 I don't realize this line: "In order to get media working you need to update in apparmor in kernel, check links below as example" in the below link … https://github.com/ubports/porting-notes/wiki/Generic-system-image-(GSI)#common-kernel-patches Mar 28 14:17:41 So... Long story short. I went from the UBPorts Matrix, to LineageOS Discord and to here - through FOUR different guides. My filesystem is a mess... All I want to do is to port the Razer Phone 2 to Halium, so I can run Linux distros on them and test them for accessibility. But I can't seem to find a straight forward "install these tools, run those commands, extract vendor blobs here, build, flash, done." guide. Mar 28 14:17:41 Instead, they are either outdated or missing cruicial details. What is the official, latest, most up to date, recommended guide? Mar 28 14:41:20 Why can't I join Halium matrix room? It says you're not invited. Mar 28 15:35:37 I don't realize this line: "In order to get media working you need to update in apparmor in kernel" in this link: https://github.com/ubports/porting-notes/wiki/Generic-system-image-(GSI)#common-kernel-patches. What does it mean? Plz help anyone. Mar 28 15:42:01 @ajqjwuuqbana041 TechieGuy: ignore this until you have something booting Mar 28 15:43:17 @NotKit [@ajqjwuuqbana041 TechieGuy: ignore this until you have something booting], ok Mar 28 16:11:36 Trying to compile my kernel with this instructions: https://forum.xda-developers.com/t/reference-how-to-compile-an-android-kernel.3627297/ Mar 28 16:12:35 But, getting this: https://dpaste.com/7VU6AWMZ8 Mar 28 16:34:23 Fwd from ajqjwuuqbana041: find: ‘arch/arm/boot/dts/’: No such file or directory Mar 28 16:34:23 Fwd from ajqjwuuqbana041: Getting this error when running make O=out clean Mar 28 16:39:59 Rui Mendes was added by: Rui Mendes Mar 28 16:44:41 amyosx was added by: amyosx Mar 28 16:46:53 @ajqjwuuqbana041 [find: ‘arch/arm/boot/dts/’: No such file or directory], wrong ARCH Mar 28 16:47:52 @NotKit [wrong ARCH], I exported ARCH=arm already as per the referred instructions Mar 28 16:48:13 should be arm64 your devicefor Mar 28 16:48:35 and you need aarch64 crosscompiler- Mar 28 16:48:51 No. My device is arm. I'm sure. And the dir is also existent. :/ Mar 28 16:49:06 adb shell said so Mar 28 16:49:09 redmi 8a? Mar 28 16:49:13 TWRP also says so Mar 28 16:49:16 @NotKit [redmi 8a?], Yeah Mar 28 16:49:22 its binder Mar 28 16:49:48 arm64 cpu, arm os Mar 28 16:50:25 Yes, but "find: ‘arch/arm/boot/dts/’: No such file or directory", that directory is actually there. Mar 28 16:57:19 What is the solution? plz... Mar 28 17:38:36 @NotKit Mar 28 18:14:39 @ajqjwuuqbana041 could you give a link to your source code and briefly describe what you did? Mar 28 18:16:54 @NotKit [@ajqjwuuqbana041 could you give a link to your source code and briefly describe …], Trying to follow these instructions: https://github.com/ubports/porting-notes/wiki/Generic-system-image-(GSI)#how-to-build-patched-kernel-or-halium-boot. Got stuck in kernel build step. Mar 28 18:17:22 Kernel Source: https://github.com/MiCode/Xiaomi_Kernel_OpenSource/tree/olive-q-oss Mar 28 18:30:40 Also my Kernel Source misses some dts files. How can I fix it? Mar 28 19:28:23 (Photo, 1280x720) https://irc.ubports.com/F4VROzzD.png Does anyone here know how to fix this compile error? Thanks in advance! Mar 28 19:40:16 tierniss was added by: tierniss Mar 28 19:53:59 Hi! I'm having some issues related to get sources for Sanders (Moto G5s Plus). Here is a link to pastebin for my manifest file: https://paste.ubuntu.com/p/M75DB9fkfj/ … Also here is a link to the pastebin with the error when making ./halium/devices/setup sanders: https://paste.ubuntu.com/p/SnfXxkBYPG/ … Please notice I'm very VERY VERY N Mar 28 19:54:00 ewbie here :) Mar 28 19:55:14 @ajqjwuuqbana041 is your device olive or olivelite? Mar 28 19:56:57 @NotKit [@ajqjwuuqbana041 is your device olive or olivelite?], olivelite Mar 28 20:27:09 I decided to completely resync my Halium 9 source tree... but I can't even use repo init. Does anyone know what causes this git error? https://pastebin.ubuntu.com/p/ShHH39qTZ8/ Mar 28 20:27:35 (repo was working fine before, it started today) Mar 28 20:27:37 your repo/git is not from snap, right? Mar 28 20:27:58 @NotKit [your repo/git is not from snap, right?], I'm not sure, I'm on Ubuntu 20.04 and downloaded repo according to docs Mar 28 20:28:38 It was working before so I really don't know why it's happening now... Mar 28 20:29:05 @tierniss [Hi! I'm having some issues related to get sources for Sanders (Moto G5s Plus). H …], do repo sync --force-sync device/motorola/sanders Mar 28 20:29:19 but it will overwrite your local changes if any Mar 28 20:29:59 @NotKit [do repo sync --force-sync device/motorola/sanders], Yup, worked like charm, thanks :) Mar 28 20:31:22 @NotKit [your repo/git is not from snap, right?], Repo was downloaded to `~/bin/`, but I don't know about git. How do I check? My git version is 2.25.1 btw Mar 28 20:31:35 git is installed from apt Mar 28 20:32:59 @NotKit [git is installed from apt], I checked and it is installed from apt. Mar 28 20:39:12 I wasn't able to solve it, but I used repo init on another machine and then just copied the .repo directory. Sync works now. Mar 28 21:33:26 Excuse me, having a problem with "Include your device in fixup-mountpoints" section. Thing is in each line -e 's [src] [return] ' \ I know what to specify in src but not in return. My fstab file seems not to include that. I pasted the fstab.qcom content here: https://paste.ubuntu.com/p/rjhQ3tgX7W/ … Ignore the auto, emmc or swap lines si Mar 28 21:33:26 nce I'm not including them in the fixup-mountpoints file :D Mar 28 22:03:49 @tierniss [Excuse me, having a problem with "Include your device in fixup-mountpoints" sect …], Are you porting Ubuntu Touch or just Halium (for other distributions)? If you're porting Ubuntu Touch, you can skip this step. Mar 28 22:08:24 @tierniss [Excuse me, having a problem with "Include your device in fixup-mountpoints" sect …], `readlink /dev/block/bootdevice/by-name/userdata` Whatever that returns is the return value of uesrdata. So on and so forth with your fstab Mar 28 22:08:45 userdata* Mar 28 22:09:16 @Korko123 [Are you porting Ubuntu Touch or just Halium (for other distributions)? If you're …], trying to port ubuntu touch, but that redirected to halium, so I'm currently doing that Mar 28 22:09:33 @Techwizz01 [readlink /dev/block/bootdevice/by-name/userdata Whatever that returns is the ret …], thanks! I'll try Mar 28 22:09:56 @tierniss [trying to port ubuntu touch, but that redirected to halium, so I'm currently doi …], Ok, so you can skip fixup-mountpoints. Then, build `halium-boot` instead of `hybris-boot` Mar 28 22:10:08 Oh as Korko123 said you don't need it for halium, just for Hybris Mar 28 22:10:15 @Korko123 [Ok, so you can skip fixup-mountpoints. Then, build halium-boot instead of hybris …], Yeah lol Mar 28 22:10:49 @tierniss You should join https://t.me/ubports_porting for Ubuntu Touch specific steps Mar 28 22:12:01 @Korko123 [Ok, so you can skip fixup-mountpoints. Then, build halium-boot instead of hybris …], but I have to previously config the kernel, right? Mar 28 22:12:20 @tierniss [but I have to previously config the kernel, right?], Yes, follow the UBports documentation for that. Mar 28 22:14:13 thank you very much Mar 28 23:20:29 Hi again! I'm currently trying to mka mkbooting but having a weird error. I pasted the full output here: https://paste.ubuntu.com/p/JMmMSsNcDn/ Mar 29 00:17:25 [Edit] Hi again! I'm currently trying to mka halium-boot but having a weird error. I pasted the full output here: https://paste.ubuntu.com/p/JMmMSsNcDn/ Mar 29 00:20:42 Hi again! I'm trying to do mka halium-boot but it seems not to be working. It has an error with FindEmulator. I included full output here: https://paste.ubuntu.com/p/7vFkZQ2wNC/ **** ENDING LOGGING AT Mon Mar 29 02:59:56 2021