**** BEGIN LOGGING AT Thu Dec 29 03:00:00 2016 Dec 29 08:24:57 greguu, hi Dec 29 08:25:09 today I have an afternoon to do some builds Dec 29 08:25:32 does 4.9 build vanilla? Dec 29 08:26:00 I could maybe test 4.10-rc instead Dec 29 08:48:18 ant_work : I build 4.9-rc3 , had issues with spi-pxa2xx and PCMCIA regulator. ALSA again fine as modules. https://github.com/greguu/linux-4.9-rc3-c3x00/commits/master\ Dec 29 08:48:38 ant_work : I did not try 4.9 proper yet Dec 29 08:49:56 ok, maybe it's ok in 4.10, I'll check the logs Dec 29 08:50:20 ant_work : spi-pxa2xx issue caused white blank on boot, pretty bad Dec 29 08:50:43 ant_work : PCMCIA reg issue was that CF card was only recognized if inserted before boot Dec 29 08:51:09 ant_work : you could eject/insert the CF card manually using PCMCIA tools to get it to work Dec 29 08:51:37 ant_work : in both cases I reverted to last known working code of 4.6.7 Dec 29 08:52:35 but iirc there were fixes ongoing before 4.8 Dec 29 08:52:36 ant_work : then all was fine.. except the first blank on console is still white, then black on the next.. old issue Dec 29 08:52:57 4.8 had some issues too Dec 29 08:53:51 so 4.6.7 was last know working for me Dec 29 08:54:26 I see in the ML there have been many important fixes afterward Dec 29 08:54:59 after when ? Dec 29 08:55:09 after 4.6 but even after 4.8 Dec 29 08:55:28 yes sure, but as I mentioned pi-pxa2xx and PCMCIA regulator issues with 4.9 Dec 29 08:55:33 hi greguu, ant Dec 29 08:55:59 https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/log/arch/arm/mach-pxa?id=refs/tags/v4.10-rc1 Dec 29 08:56:17 this only for mach-pxa, then there are the drivers etc.. Dec 29 08:56:21 hi VartiWork Dec 29 08:56:56 these clock changes reached hopefully an end Dec 29 08:57:44 I will try 4.10 once released proper. Currently 4.9-rc3 is fine with the "fixes" Dec 29 08:57:54 good to know ;) Dec 29 08:58:09 I'm scared about the changes for sa1100 / collie Dec 29 08:58:21 let's postpone this Dec 29 08:58:55 if you have time, build a vanilla 4.9 and see if you get the spi-pxa2xx and PCMCIA regulator issues Dec 29 08:59:10 fist one easy to notice on boot Dec 29 08:59:16 I think this started with Dec 29 08:59:16 [PATCH] spi: spi-pxa2xx: remove legacy PXA DMA bits Dec 29 08:59:31 ..Generic DMA support was already implemented ... Dec 29 08:59:43 somewhere after 4.6.7, as even 4.7 would have the issue Dec 29 09:01:12 and about pcmcia Dec 29 09:01:14 [PATCH 0/3] SA11x0/PXA pcmcia fixes Dec 29 09:01:22 possibly yes Dec 29 09:02:15 I have no time to dig deeper on why it failed Dec 29 09:03:07 I hope this will get attention and fixed before 4.10 Dec 29 09:03:27 Who is looking after PXA ? Dec 29 09:04:18 mainly Robert Jarzmik Dec 29 09:04:31 but Russell King does SA1100 and some PXA as well Dec 29 09:04:43 do they have Zaurus to test ? Dec 29 09:05:03 :') Dec 29 09:05:12 no, they have enough boards (already asked) Dec 29 09:05:59 hm Dec 29 09:06:10 I guess some feedback is needed to let them know Dec 29 09:06:24 right Dec 29 09:07:25 we'll have to review the defconfigs again after the last changes Dec 29 09:08:49 ok, I keep an eye out for 4.10 Dec 29 09:09:05 more issues around devicetree to be expected.. Dec 29 09:33:08 more device tree implement by Robert https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=74e382b870caf297f4e1a727010c9a26cce6b6af Dec 29 09:33:21 hope this works for Zaurus too Dec 29 09:35:53 to allow overlcock using cpu-freq Dec 29 09:36:05 currently this needs to be hardcoded afaik Dec 29 10:37:14 bbl **** BEGIN LOGGING AT Thu Dec 29 16:57:07 2016 **** BEGIN LOGGING AT Thu Dec 29 18:01:37 2016 **** ENDING LOGGING AT Fri Dec 30 03:00:00 2016