**** BEGIN LOGGING AT Fri Feb 23 03:00:01 2018
Feb 23 06:58:58 <greguu> ant_work: I disceted the .conf files
Feb 23 06:59:41 <greguu> it was my fault, I enabled  CONFIG_PINCTRL=y on 4.15 / 4.16
Feb 23 07:27:15 <greguu> for some reason this causes the black screen and boot failure
Feb 23 07:27:47 <greguu> I assume the PXA PINCTRL is "Marvel" only. This also explains the failure of some ofthe GPIO patches that now rely on PINCTRL
Feb 23 07:46:42 <greguu> please test and confirm :)
Feb 23 07:55:37 <ant_work> greguu, hello
Feb 23 07:56:07 <ant_work> I know who to ask about pinctrl vs. pxa vs. devicetree
Feb 23 07:56:26 <ant_work> Linus Walleij
Feb 23 08:02:59 <greguu> ok, please try and confirm :)
Feb 23 08:04:03 <greguu> but there is clearly a dt and pxa issue for Zaurus
Feb 23 08:10:21 <ant_work> theyare testing on other pxa devices
Feb 23 08:10:47 <ant_work> Linus had a plan to convert all pxa
Feb 23 08:11:03 <ant_work> he even has/had a report-status as .xls online
Feb 23 08:11:52 <ant_work> now, let me first understand, is pinctrl affecting pxa27x only or pxa25x as well?
Feb 23 08:12:02 <greguu> ok, at least we identified the issue. I need to do more testing on 4.16 now to see what is working and what not
Feb 23 08:12:03 <greguu> I assuem the PCMCIA issue is still there
Feb 23 08:12:15 <greguu> depending what you choose in config
Feb 23 08:12:22 <greguu> I can not test pxa25x
Feb 23 08:12:24 <greguu> try it
Feb 23 08:12:36 <greguu> I selected PXA 27x PINCTRL
Feb 23 08:12:40 <ant_work> spitz has one more gpio expander, akita two
Feb 23 08:12:50 <ant_work> compared to corgi
Feb 23 08:13:02 <ant_work> maybe these
Feb 23 08:13:32 <greguu> give it a go, as I found out, the gpio-pxa.c is not tuned for Zaurus Spitz anymore and fails (because of dt and pinctrl introduction)
Feb 23 08:13:32 <ant_work> anyway, nice work, we know where to look ;)
Feb 23 08:14:25 <greguu> no worries, it was a pleasure to compile the kernel 20+ times
Feb 23 08:17:44 <ant_work> heh
Feb 23 08:18:05 <greguu> sarcasm ?
Feb 23 08:18:08 <greguu> hehe?
Feb 23 08:18:09 <ant_work> Robert is testing on another device, cma smthg
Feb 23 08:18:20 <ant_work> I think we must:
Feb 23 08:18:25 <ant_work> 1) poke Robert
Feb 23 08:18:37 <ant_work> 2) try to lure Linus
Feb 23 08:18:52 <ant_work> 3) test these changements
Feb 23 08:19:09 <greguu> yes, 1), but I have not found out what exact patch introduced the gpio issue.
Feb 23 08:19:39 <greguu> but it would not hurt to ask Robert
Feb 23 08:19:50 <greguu> he may just pin point it quickly, knowing the stuff
Feb 23 08:20:17 <greguu> then ask about PINCTRL dependencies and impact on Zaurus
Feb 23 08:27:51 <greguu> at least give me some credit on the Reported-by :)
Feb 23 08:28:33 <greguu> for all, PCMCIA, GPIO and PINCTRL, hehe, i forgive the SPI issue :)
Feb 23 08:31:39 <greguu> as PCMCIA (detection on boot) is still an issue
Feb 23 08:48:02 <ant_work> iirc he already fixed one regression introduced by pinctrl on non-dt boards
Feb 23 08:52:48 <ant_work> greguu, https://patchwork.kernel.org/patch/7674861/
Feb 23 08:53:14 <ant_work> interesting, so maybe I can fix the sleep mode of poodle
Feb 23 08:53:42 <ant_work> (it stay shut only if I open the battery lid-switch during poweroff)
Feb 23 08:54:04 <ant_work>  - whether the GPIO direction was input or output
Feb 23 08:54:12 <ant_work> ^ there was a regression about this
Feb 23 08:55:11 <ant_work> greguu, https://patchwork.kernel.org/patch/10201529/
Feb 23 08:55:54 <ant_work> yes, Linus and Robert are the two involved
Feb 23 08:55:59 <ant_work> definitely
Feb 23 09:01:07 <greguu> https://patchwork.kernel.org/patch/7674861/ (2015) ?
Feb 23 09:01:26 <greguu> this more likely introduced the issue
Feb 23 09:01:57 <greguu> I did not notice PINCTRL as an option in config before 4.15
Feb 23 09:23:54 <ant_work> http://lists.infradead.org/pipermail/linux-arm-kernel/2015-November/389463.html
Feb 23 09:24:03 <ant_work> here it explains a lot
Feb 23 09:25:59 <ant_work> the whole thread
Feb 23 09:29:34 <ant_work> +	select PINCTRL_PXA
Feb 23 09:29:34 <ant_work> +	default y if PXA27x
Feb 23 09:30:20 <ant_work> greguu, sigh
Feb 23 09:30:39 <ant_work> I could stay away from pinctrl and regulators until todayù
Feb 23 09:30:55 <greguu> I did not notice PINCTRL as an option in config before 4.15
Feb 23 09:31:08 <greguu> wrong
Feb 23 09:31:11 <greguu> The requested URL /pipermail/linux-arm-kernel/2015-N was not found on this server.
Feb 23 09:32:19 <ant_work> Sat Nov 21 10:04:53 PST 2015
Feb 23 09:32:50 <greguu> and ? It never showed up on "oldconfig" until 4.15
Feb 23 09:33:17 <ant_work> I think it is 4.5
Feb 23 09:33:35 <ant_work> you remember 4.4 was  long broken
Feb 23 09:34:26 <ant_work> after 4.4.8 up until 4.4.90 iirc
Feb 23 09:34:38 <greguu> i would have noticed, build 4.9. 4.12
Feb 23 09:34:42 <ant_work> a dma regression on pxa
Feb 23 09:34:54 <ant_work> something was wrongly backported from 4.6
Feb 23 09:35:11 <ant_work> 4.5 did not last long
Feb 23 09:35:28 <greguu> there is a regression going on
Feb 23 09:35:36 <ant_work> yes, since that patchset
Feb 23 09:35:38 <greguu> 2015 is misleading
Feb 23 09:35:44 <greguu> recently
Feb 23 09:36:35 <greguu> some of the PINCTRL patches did not take effect until PINCTL showed up in config
Feb 23 09:55:32 <ant_work> greguu, I see there are pending patches
Feb 23 09:55:34 <ant_work> http://lists.infradead.org/pipermail/linux-arm-kernel/2017-April/501957.html
Feb 23 10:00:55 <ant_work> greguu, I'll take some serial log and send to Robert
Feb 23 10:01:15 <ant_work> shame you don't have yet got one (for free)
Feb 23 10:01:26 <greguu> great, did you confirm the issue when enabling PINCRTL ?
Feb 23 10:01:29 <ant_work> ask again on OESF, maybe in some cruft-box someone has one
**** ENDING LOGGING AT Fri Feb 23 10:01:44 2018

**** BEGIN LOGGING AT Fri Feb 23 10:01:45 2018
**** ENDING LOGGING AT Fri Feb 23 10:01:49 2018

**** BEGIN LOGGING AT Fri Feb 23 10:04:11 2018
Feb 23 10:26:18 <greguu> well, for me ide_cs was never used
Feb 23 10:26:22 <greguu> just pata_cs
Feb 23 10:26:43 <greguu> something wrong ?
Feb 23 10:30:14 <ant_work> afair there was the need to sync both files
Feb 23 10:30:24 <ant_work> with the new IDs
Feb 23 10:30:44 <ant_work> ide_cs is from the past
Feb 23 10:30:50 <ant_work> 2.6
Feb 23 10:43:06 <ant_work> greguu, patch sent to Robert
Feb 23 10:43:11 <ant_work> hi Omegamoon
Feb 23 10:43:29 <greguu> Omegamoon ? Like Debian Port ?
Feb 23 10:43:34 <greguu> must be years
Feb 23 10:43:37 <ant_work> ;)
Feb 23 10:43:57 <greguu> why is omegamoon OP?
Feb 23 10:44:08 <greguu> rules the kexecboot still
Feb 23 10:44:17 <VartiWork> oh, omegamoon
Feb 23 10:44:26 <VartiWork> long time no see
Feb 23 10:44:30 <Omegamoon> hi there :)
Feb 23 10:44:41 <Omegamoon> long time no "see" indeed
Feb 23 10:44:58 <VartiWork> no "read" actually :)
Feb 23 10:45:11 <Omegamoon> was curious how things are in here ;)
Feb 23 10:45:27 <VartiWork> thanks btw for your work on Zubuntu back in the days, I used it on my SL-C1000
Feb 23 10:45:36 <ant_work> ah, usual maintainer things for Z and an eye on new devices
Feb 23 10:45:59 <VartiWork> until Ubuntu dropped support for armv5, that is
Feb 23 10:46:36 <VartiWork> mantaining OESF, trying stuff on my Zaurus, collecting them, waiting for my new device to arrive (a Gemini PDA)
Feb 23 10:46:56 <Omegamoon> all my Zaurus devices are eating dust...
Feb 23 10:47:33 <VartiWork> are they still working?
Feb 23 10:47:39 <Omegamoon> @VartiWork: Gemini PDA... you're a backer?
Feb 23 10:47:44 <VartiWork> yes
Feb 23 10:47:59 <VartiWork> I should receive my unit in a month or two
Feb 23 10:48:01 <Omegamoon> I just love that formfactor
Feb 23 10:48:07 <VartiWork> me too
Feb 23 10:48:22 <VartiWork> and the Gemini seems to be keeping its promises
Feb 23 10:49:17 <Omegamoon> I'm backer #482 so it should arrive soonish :P
Feb 23 10:49:34 <VartiWork> you should undust your Z's and give greguu's Arch Linux ARM port a go :)
Feb 23 10:49:43 <VartiWork> aah, great, welcome to the club then
Feb 23 10:49:49 <ant_work> Omegamoon, in the meantime I had a gcw0 for my kid
Feb 23 10:50:12 <VartiWork> OESF has now become the reference forum for Gemini users
Feb 23 10:50:33 <ant_work> VartiWork, have you asked Tom about irc channel?
Feb 23 10:50:44 <Omegamoon> @ant_work: cool looking device :)
Feb 23 10:51:11 <VartiWork> ant_work: no, not yet, today I was quite busy
Feb 23 10:51:11 <ant_work> yeah, but a bit fragile in that dirty hands :/ already disposed off
Feb 23 10:51:19 <VartiWork> and this afternoon I'll be at home with my kids
Feb 23 10:51:37 <VartiWork> so I hope this evening to get in touch with him
Feb 23 10:52:44 <ant_work> Omegamoon, part this I am playing with Enigma2 linux decoders
Feb 23 10:53:05 <ant_work> OpenPLi, a derivative of OpenEmbedded
Feb 23 10:53:53 <ant_work> but these are again mipsel so you are cornered with kernel
Feb 23 11:09:38 <Omegamoon> ant_work, don't know OpenPLi... looks interesting
Feb 23 11:10:43 <Omegamoon> but I can't handle any more devices...  :)
Feb 23 11:21:00 <greguu> just get back to your Zaurus (if you still have it)
Feb 23 11:24:36 <Omegamoon> @greguu, oh sure, I still have them all
Feb 23 11:25:06 <greguu> good, join us if you get your gemini.
Feb 23 11:26:25 <VartiWork> +1
Feb 23 11:27:24 <Omegamoon> this channel is still being used for kexecboot?
Feb 23 11:29:02 <greguu> yes, we still talk about kexecboot, sometimes :)
Feb 23 11:29:16 <greguu> mostly about Zaurus kernel support
Feb 23 11:29:46 <Omegamoon> what is the current status of Zaurus kernel support?
Feb 23 11:29:54 <greguu> it is the die hard IRC channel for Zaurus geeks
Feb 23 11:30:19 <greguu> 4.14.18 , 4.16-rc2 WIP
Feb 23 11:30:37 <greguu> for 3x00
Feb 23 11:30:49 <greguu> akita also may work
Feb 23 11:31:06 <greguu> ant_work may know more about Cx00
Feb 23 11:31:42 <greguu> Cx0 mabye
Feb 23 11:32:22 <greguu> but check the OESF.org/forum
Feb 23 11:38:37 <Omegamoon> @greguu, thanks, I will :)
Feb 23 11:38:57 <Omegamoon> and I'll try to visit more often here ;)
Feb 23 11:41:58 <greguu> no worries, welcome anytime..
Feb 23 11:47:19 <VartiWork> you're welcome here Omegamoon, glad to have you back here
Feb 23 12:00:16 <ant_work> Omegamoon, are you using librelec?
Feb 23 12:11:07 <greguu> I do
Feb 23 12:11:19 <greguu> on 905s
Feb 23 12:24:18 <Omegamoon> @ant_work, I am using LibreELEC yes... actively developing it for Rockchip devices to be precise :)
Feb 23 12:29:28 <ant_work> I see, I have also used Lakka and it is built with librelec now
**** ENDING LOGGING AT Sat Feb 24 03:00:00 2018