**** BEGIN LOGGING AT Mon Apr 27 02:59:59 2015 Apr 27 03:33:26 I give my n900 to the phone service. And thay are told that imei was wiped. How can I be sure that I have this or not? Apr 27 03:50:20 ussd *#06# saying that imei is blank. Apr 27 04:12:10 what was the priginal problem with it Apr 27 04:35:57 sveta n900 no seeing the sim-card Apr 27 04:44:25 mm Apr 27 04:55:42 well, you can always install some voip software and use it instead of gsm Apr 27 04:56:01 in the worst case that you cant set imei again Apr 27 05:06:28 pentanol: and most likely n900 sees the card, but isnt allowed by gsm network to register Apr 27 05:06:41 if you can see contacts from the card then its the case Apr 27 05:28:20 oh, and another solution would be neo900 board Apr 27 05:28:21 :) Apr 27 05:35:59 KotCzarny yes, I can see contacts from sim-card. Apr 27 05:37:24 my bet would be someone tried to change imei, but failed, and now checksums dont work out and its not being set Apr 27 05:42:27 hmm Apr 27 05:42:28 someone reported that no-connection was fixed by updating apps Apr 27 05:52:03 you can also try global and regionalized firmware Apr 27 05:56:23 http://talk.maemo.org/showpost.php?p=1188556&postcount=45 Apr 27 06:00:07 another possibility is that gsm module is loose Apr 27 06:00:08 https://www.jabawok.net/?p=14 Apr 27 06:01:48 and another is trying old firmware versions Apr 27 06:02:13 1.2 or earlier Apr 27 09:28:09 KotCzarny: once had working 1.3 there is no going back to <1.3 as the modem hardware got flashed Apr 27 09:28:36 iirc Apr 27 10:24:08 moin :) Apr 27 10:24:30 hi, zGrr Apr 27 10:26:04 svetlana: привет! :) Apr 27 10:26:54 ой, привет Apr 27 10:57:56 hello guys Apr 27 13:00:39 warfare: there seems to be some problem with maemo.org Apr 27 13:01:01 freemangordon_: -v, please Apr 27 13:02:15 freemangordon_: "please be more verbose" - maemo.org as a platform or just the website (which icinga alarmed me about 10 Minutes ago) ;) Apr 27 13:02:33 warfare: maemo.org seems down Apr 27 13:02:45 "It's not just you! http://maemo.org looks down from here. " Apr 27 13:03:11 warfare: I still cannot ssh into it, trying for the last 40 seconds Apr 27 13:03:44 freemangordon_: I'm killing the vm, lots and lots of OOM killer messages. Apr 27 13:03:53 It is either DoS attacked or..., dunno Apr 27 13:04:01 ok Apr 27 13:04:06 Out of memory: Kill process 23878 (apache2) score 29 or sacrifice child Apr 27 13:06:20 Should be back now. Apr 27 13:06:35 yep, it is up Apr 27 13:16:06 yay, thx :) Apr 27 16:06:05 finally! I made it work. yeah! Apr 27 16:06:40 :-) Apr 27 16:11:24 are cssu devs here too? Apr 27 16:21:38 what works? Apr 27 16:23:36 ah, xchat :) Apr 27 16:36:55 yeah. xchat. Apr 27 16:38:26 @Sicelo: I was actually signed on both XChat and that conversations plugin. and so I was stuck and finally my battery died. lol Apr 27 16:49:09 princefakhan: #maemo-ssu is where the devs hang about for CSSU decisions Apr 27 16:50:30 if I want to request a feature in cssu, should I go there. Apr 27 16:51:18 what feature? Apr 27 16:52:01 well I would want to have full browsing experience in portrait mode in MicroB Apr 27 16:52:22 41 Apr 27 16:52:24 opos Apr 27 16:52:56 if I want to go to menu or desktop I have to slide out keyboard and then to the menu. Apr 27 16:54:22 if we could have something like in landscape where you can enter exit fullscreen it could work Apr 27 16:56:47 which menu ? Apr 27 16:56:50 launcher menu ? Apr 27 17:09:17 I have already reported that Apr 27 17:09:27 oh ...gone Apr 27 17:09:52 princefakhan: I have already reported that issue Apr 27 17:10:50 TBH MicroB is old and we need to look at putting effort into a modern lightweight browser. Apr 27 17:11:25 QML Browser was looking promising, also emdedlite until there was a roadblock I believe Apr 27 17:14:57 sixwheeledbeast thanks for the info. Apr 27 17:15:25 my battery died. :) Apr 27 17:15:41 princefakhan_: also I was told the part of MicroB that causes the issue is closed anyway. Apr 27 17:15:57 yeah, the UI is closed :( Apr 27 17:16:01 (closed-source) Apr 27 17:16:02 So not easy to patch either. Apr 27 17:16:12 ~closed Apr 27 17:16:13 i guess closed is http://wiki.maemo.org/Why_the_closed_packages or https://wiki.maemo.org/Fremantle_closed_packages, or http://elinux.org/N900 Apr 27 17:16:46 oh yeah! didn't give a thought on that Apr 27 17:19:41 qmlbrowser isn't working as expected. it is sluggish. Apr 27 17:20:08 I'm not sure if it is the browser or my phone. Apr 27 17:21:37 not your phone Apr 27 17:21:54 it often feels "slower" than microb Apr 27 17:22:59 scrolling is definitely slower (but microb cheats a bit with the "chessboard pattern") Apr 27 17:23:59 the jscore engine (used in qmlbrowser) is much faster though Apr 27 17:24:16 meh :) Apr 27 17:27:19 While on topic, MicroB for me has not been opening the Bookmarks window at start up and i have NFC why. Apr 27 17:28:20 strange Apr 27 17:34:14 Hmm yes I NFC why, no option to do that, it has only started lately. I get a single [untitled] browser page and have to open bookmarks myself. Apr 27 17:35:30 is it possible to replace the n900 speaker in the case? Apr 27 17:35:38 sorry guys. I was on kiwiirc on android/chrome. it kept reloading the moment I went to another page. :) Apr 27 17:36:19 NFC as in near field communication? Apr 27 17:36:57 no f... clue :) Apr 27 17:38:48 could someone tell me how frequently irc logs are refreshed Apr 27 17:39:49 check the last visible message then do the math Apr 27 17:40:56 that is exactly what I'm doing. ;) Apr 27 17:41:57 sixwheeledbeast: i would like to have that. i don't quite like having to start at bookmarks menu Apr 27 17:42:38 Sicelo: it's annoying. You can't even select a home page! Apr 27 17:42:59 ~NFC Apr 27 17:42:59 it has been said that nfc is No Fucking Clue, or near field communications Apr 27 17:43:32 hahah Apr 27 17:43:36 but i like that because you can just type your desired page without the creation of a new window .. which is what i actually don't like. Apr 27 17:43:56 so if the bookmarks menu didn't have to launch a new window, sure, i'd like ti Apr 27 17:43:58 logs are pretty live ~5 minutes delay Apr 27 17:44:01 *it Apr 27 17:44:01 if that Apr 27 17:44:20 ~botsnack Apr 27 17:44:20 sixwheeledbeast: :) Apr 27 17:44:30 5 mins it is. Apr 27 17:45:09 Sicelo: Well I need to know how it happened first ;) Apr 27 17:45:47 we have no near field communication too. lol! Apr 27 17:46:38 princefakhan hi Apr 27 17:46:54 no fukin clue Apr 27 17:47:48 hi openbot. thanks. but u took way too much time answering. :p Apr 27 17:47:59 sixwheeledbeast Apr 27 17:48:10 princefakhan? ? Apr 27 17:49:08 I mean if u look up a lil bit u would know people already told me that Apr 27 17:49:46 sixwheeledbeast is there any engine that is lightweight and usable on maemo Apr 27 17:49:54 I even made a joke. :) Apr 27 17:50:06 Don't look at me Apr 27 17:50:23 princefakhan lol i logged after i saw u Apr 27 17:50:51 openbot I figured Apr 27 17:51:39 anyway. what does ~something means Apr 27 17:51:59 sixwheeledbeast. .. look at them lool at em how they are looking at me ... eyes are skiking out like honey on bees ... comes to mind :p Apr 27 17:52:48 thet are irc commands or bot actions princefakhan Apr 27 17:53:07 hmmm Apr 27 17:53:24 ~kill princefakhan Apr 27 17:53:24 * infobot shoots a magneto-ionized anti-photon gun at princefakhan Apr 27 17:53:29 ~botsnack Apr 27 17:53:30 princefakhan: thanks Apr 27 17:54:33 register with freenode @ princefakhan Apr 27 17:54:55 oh come on openbot and infobot. I just started irc. lool Apr 27 17:55:13 princefakhan: there is an infobot, a perl script that listens to the channel and can provide information. Apr 27 17:55:20 me noob too Apr 27 17:55:39 infobot is a bot, Openbot is not. Don't get confused.... Apr 27 17:56:09 ~wiki flashing Apr 27 17:56:12 At http://en.wikipedia.org/wiki/Flashing (URL), Wikipedia explains: "{{wiktionary|flashing}} 'Flashing' may refer to: {{TOC right}} *Flashing (technology), overwriting an EEPROM module in a device **BIOS flashing, overwriting a BIOS image *Flashing (cinematography), a technique that desaturates the color so that one sees more in shadowed areas *Flash evaporation, causing evaporation by lowering a fluid's pressure below its vapour pressure *Flashing ... Apr 27 17:56:13 ~2*2 Apr 27 17:56:14 4 Apr 27 17:56:24 ~weather EDDN Apr 27 17:56:25 meh Apr 27 17:56:26 Nuernberg, Germany; (EDDN) 49-30N 011-03E 318M; last updated: 2015.04.27 1750 UTC; Dew Point: 51 F (11 C); Pressure (altimeter): 29.53 in. Hg (1000 hPa); Relative Humidity: 67%; Sky conditions: mostly cloudy; Temperature: 62 F (17 C); Visibility: greater than 7 mile(s); Wind: from the N (010 degrees) at 7 MPH (6 KT) (direction variable) Apr 27 17:56:33 good Apr 27 17:56:42 ~weather mbabane Apr 27 17:56:44 I can't find station code "MBABANE" (see http://www.nws.noaa.gov/oso/site.shtml or http://www.nws.noaa.gov/tg/siteloc.shtml for ICAO locations codes). Apr 27 17:56:48 some examples... Apr 27 17:56:52 * Sicelo shoots infobot Apr 27 17:57:13 ~slap Sicelo Apr 27 17:57:14 * infobot slaps Sicelo, keep your grubby fingers to yourself! Apr 27 17:57:15 ah I see. well I knew openbot is human. Apr 27 17:57:49 ~weather fdms Apr 27 17:57:52 Manzini / Matsapa Airport, Swaziland; (FDMS) 26-32S 031-18E; last updated: 2015.04.27 1500 UTC; Dew Point: 62 F (17 C); Relative Humidity: 77%; Sky conditions: mostly cloudy; Visibility: greater than 7 mile(s); Weather: 69 F (21 C); Wind: from the WNW (300 degrees) at 12 MPH (10 KT) Apr 27 17:57:55 :) Apr 27 17:57:58 didn't know about infobot until he said thanks when I gave him something to eat. lol Apr 27 17:58:15 anyway thanks for clearing it up Apr 27 17:58:33 :) Apr 27 17:58:34 i am openbot and i am not a bot Apr 27 17:58:38 whatever FDMS stands for Apr 27 17:58:48 the wonders of a script, lol Apr 27 17:58:56 Sicelo there airport codes Apr 27 17:59:26 yeah. he sounds pretty human Apr 27 17:59:41 ;p Apr 27 17:59:50 krkr Apr 27 17:59:52 ..../help princefakhan without dots Apr 27 18:01:18 oh lol! someone is helping me without any dots. it is all very confusing texts here. :p Apr 27 18:02:20 ./msg nickserv register password youremail@.com Apr 27 18:02:29 princefakhan Apr 27 18:03:26 usual chills and thrills i had in the past Apr 27 18:03:29 lol Apr 27 18:04:34 with reg you can enjoy reg only channels Apr 27 18:04:45 haha. though I think commands do not work on webchat.freenode.net Apr 27 18:05:16 ok c u later Apr 27 18:05:25 Thanks for the info. I have already registered. Apr 27 18:05:43 OK. bye Apr 27 18:08:35 ah! just ran into this problem again. thought I should ask. Apr 27 18:09:06 many times when I connect a charger to my phone it res Apr 27 18:09:56 *reads it as a USB device. and asks me to select a mode. Apr 27 18:10:31 and then it doesn't go away unless I restart the device. Apr 27 18:12:21 also Apr 27 18:12:23 happens with me too at times i gnore it Apr 27 18:12:32 is it a problem Apr 27 18:13:10 princefakhan are u on thumb Apr 27 18:13:39 ahh! I am also using Advance power monitor. I don't remember if this happened before Apr 27 18:14:21 aha Apr 27 18:14:39 welcome back openbot. yeah I m on thumb. Apr 27 18:14:40 princefakhan: i solved this by first connecting charger to phone and after that to mains Apr 27 18:14:45 og charger Apr 27 18:15:15 vajb humm Apr 27 18:15:24 bbl Apr 27 18:15:30 Vajb please elaborate Apr 27 18:16:01 also if u have usbmode installed u can re-enebale peripheral mode and it resets that usb question Apr 27 18:16:38 princefakhan: answered ur charger recogniced as computer problem Apr 27 18:16:43 I uninstalled usbmode thinking it could be a culprit too. Apr 27 18:17:46 nah! what did u mean by "connected to mains" Apr 27 18:17:48 also if u have bnf installed u can check if it thinks wall charger is present or not Apr 27 18:18:08 meaning pluging ur chager to wall socket Apr 27 18:18:31 ahh! Apr 27 18:19:53 i heard that problem is caused by partial connection of usb cable Apr 27 18:20:21 which is result of not plugging in cable perfectly alligned with phone Apr 27 18:22:01 yeah I think my USB is faulty. I am not able to charge my phone properly these days. Apr 27 18:22:07 :( Apr 27 18:23:44 maybe my trick works Apr 27 18:23:55 or u tried that way already? Apr 27 18:24:25 have u filed down those small hooks in usb cable? Apr 27 18:24:34 if not u should Apr 27 18:24:59 well ur trick didnt work for me. :( Apr 27 18:25:14 :/ Apr 27 18:25:37 it sounds to me that r usb socket is coming loose Apr 27 18:25:42 filed down? Apr 27 18:25:44 ur* Apr 27 18:26:06 exactly. it loose Apr 27 18:26:23 yes there r two small hooks in cable connector. File them down with small metal file Apr 27 18:27:23 probably damage is already done, but that will prevent further damages Apr 27 18:27:46 i heard that someone teared whole port off with charger cable Apr 27 18:28:49 well those are all fine. I have many connectors. it is no doubt my device's USB socket Apr 27 18:30:43 ummm. so I have to open up my device to do that. don't I Apr 27 18:31:55 princefakhan: possibly an issue with your uUSB port. Apr 27 18:32:12 ~usbfix Apr 27 18:32:12 it has been said that usbfix is http://talk.maemo.org/showthread.php?t=75920 - and **NEVER** use epoxy (unless you want to seal your device for underwater), or https://www.youtube.com/watch?v=fYz5nIHH0iY#t=1866, you will basically need two irons: a small good one (or better hot-air reflow) and a 60+ Watt Apr 27 18:33:56 thanks for the link. it was fine. started d happening this month only. I was too careless I guess. Apr 27 18:36:37 i have been extra carefull with my port Apr 27 18:47:54 Vajb well I haven't Apr 27 18:49:10 one more thing guys. the led blinks even when u r using the device, doesn't it? mine is not blinking. Apr 27 18:52:26 i mean using it while charging. Apr 27 18:54:15 and what does short rapid yellow blink means Apr 27 19:03:32 mine doesn't blink when using... though I did not enable the "enable LED when on" checkbox... Apr 27 19:04:40 mine either. Only when screen is locked and it's charging. Apr 27 19:06:02 well I don't see "enable LED when on" anywhere but I have checked all LED notifications in Settings. Apr 27 19:06:55 "device on" that is... mine is unchecked, this might be the "breathing light" on older nokias... Apr 27 19:08:13 mine is checked. what should I expect since my USB port is effed up? Apr 27 19:09:30 I believe rapid short blinking happens sometime cuz the cable keeps connecting and disconnecting from the usb port. Apr 27 19:10:36 I also recieve the "The device is using more power than actually recieving. blah blah" prompt. Apr 27 19:12:35 dont know, never had it checked, I suspect if the usb is unplugged, it will blink the LED when the device is on (versus shutdown) Apr 27 19:13:35 it took me a long time to find microusb cables and chargers that are functional enough to actually charge... Apr 27 19:14:07 that is when the device is locked. Apr 27 19:15:33 And the led blinks in locked case only when you have checked "device on" in "Notification lightt" in Settings. Apr 27 19:16:17 I don't suppose there is any blinking if you are doing stuff while charging the device. Apr 27 21:23:04 If "Device on" is checked you get a faint white flash from the notification light every ~2 sec Apr 27 21:23:15 While locked but on Apr 27 21:23:58 If you don't get yellow slow pulsing while on charger something is wrong/broken. Apr 27 21:24:16 You can't disable that from settings Apr 27 21:24:47 While the device is OFF or act-dead that is Apr 27 22:36:44 sigh, Maemo is going bonkers for hours now since I tried to use Recaller Apr 27 22:36:53 which has been the case since I did the CSSU thing Apr 27 22:37:04 unfortunately, I have unsaved data I need :/ Apr 27 22:37:17 any ideas on recovering? Apr 28 01:14:33 bonkers, how? Apr 28 01:15:08 Luke-Jr: I am using Orechiette-or-something, currently. I do not have many phone calls, though Apr 28 01:16:46 O.o? Apr 28 01:20:05 looks like it died Apr 28 01:20:24 so now the question is if I can recover the unsaved recording Apr 28 01:40:13 If it wasn't saved, pretty much no, I think? Apr 28 01:40:43 There is TestDisk , but it is to recover deleted files, I think... **** ENDING LOGGING AT Tue Apr 28 02:59:59 2015