**** BEGIN LOGGING AT Wed May 27 02:59:59 2015
May 27 06:01:14 <pentanol> hi there, n900 looks like supports ext2\3 but on my thats available just for reading, I can't write to the ext2 flash.
May 27 06:01:24 <pentanol> or not?
May 27 06:02:51 <freemangordon> ext2/3 is supported
May 27 06:02:57 <L29Ah> worksforme
May 27 06:34:03 <kerio> ext4 works for me
May 27 09:20:37 <APic> kerio: Bigwig.  ;-P
May 27 09:20:49 <APic> I hope i get my b0rked N900 alive again today.
May 27 09:43:25 <APic> Finishing flashing... done
May 27 09:43:25 <APic> o/
May 27 09:49:13 <APic> Boots o/
May 27 09:54:47 <APic> .o0(High Shoes ;-)))
May 27 09:56:17 <kerio> the fuck
May 27 10:05:11 <bencoh> APic: I'm not sure what you're trying to achieve, but ... did you try rescueos ?
May 27 10:05:31 <APic> Not yet
May 27 10:05:34 <APic> I tried backupmenu
May 27 10:05:38 <APic> But it was b0rk
May 27 10:06:06 <APic> „rescueos“ sounds like i want it
May 27 10:06:09 <APic> Thanks for the Hint.
May 27 10:06:56 <bencoh> first time upgrading to CSSU ?
May 27 10:10:55 <APic> Nah
May 27 10:10:59 <APic> Like 3-4rd
May 27 10:18:52 <APic> I will try „stable“ instead of „testing“ now
May 27 10:18:58 <APic> Maybe „backupmenu“ will also work then
May 27 10:19:13 <APic> Can i have both „rescueos“ and „backupmenu“?
May 27 10:20:11 <zGrr> moin :)
May 27 10:23:16 <bencoh> APic: you can load rescueOS (kernel+initrd) using flasher
May 27 10:23:50 <bencoh> and you can do everything with uboot entries (stop using multiboot ! ;)
May 27 10:23:50 <APic> Oh, i see.
May 27 10:24:17 <APic> Does „backupmenu“ use „multiboot“?
May 27 10:26:52 <kerio> no
May 27 10:27:08 <kerio> backupmenu is loaded by bootmenu
May 27 10:27:09 <bencoh> no, some preinit hook iirc
May 27 10:27:17 <kerio> which runs in preinit, yeah
May 27 10:27:26 <kerio> it's launched *after* the kernel is loaded
May 27 10:28:42 <APic> And with U-Boot i could select a backup Kernel?
May 27 10:29:54 <bencoh> you can select the kernel, yes
May 27 10:37:11 <drathir> pali loader rocks!
May 27 10:38:08 <drathir> *hidding*
May 27 11:52:04 <APic> Yay
May 27 11:52:07 <APic> Got the U-Boot
May 27 11:52:14 <APic> Now Kernel-Power
May 27 11:52:24 <APic> Then backupmenu
May 27 12:12:28 <drathir> APic: gz...
May 27 12:12:39 <APic> ktnx
May 27 12:12:48 <APic> Backupmenu running now
May 27 14:44:28 <APic> /home/apic # chroot /d
May 27 14:44:28 <APic> FATAL: kernel too old
May 27 14:44:32 <APic> Fuck
May 27 14:44:34 <APic> What the Heck?
May 27 14:44:38 <KotCzarny> kernel too old
May 27 14:44:42 <KotCzarny> clearly said
May 27 14:45:45 <bencoh> glibc ?
May 27 14:48:05 <APic> /d/lib/arm-linux-gnueabi # ./libc.so.6 
May 27 14:48:05 <APic> GNU C Library (Debian GLIBC 2.19-18) stable release version 2.19, by Roland McGrath et al.
May 27 14:48:15 <APic> How do i downgrade that one?
May 27 14:48:28 <APic> Maybe just switch to „oldstable“?
May 27 14:48:46 <APic> Or has anyone a nice new Kernel for me?
May 27 14:48:54 <APic> I mean, i have U-Boot now
May 27 14:48:59 <bencoh> I still dont understand why you're doing this
May 27 14:49:01 <KotCzarny> you cant easily downgrade a glibc
May 27 14:49:09 <APic> But the „backupmenu“ somehow removed all the Options
May 27 14:49:21 <APic> Uh
May 27 14:49:29 <APic> The „kernel-power“ i meant
May 27 14:49:42 <APic> I can only select ordinary Kernel, Kernel-Power and Commandline
May 27 14:49:43 <bencoh> why do you need a debian chroot to retrieve your data ?
May 27 14:49:52 <APic> Before with plain U-Boot there were more Options
May 27 14:50:16 <APic> I do not need the Chroot to retrieve the Data, i generally need it.
May 27 14:50:49 <bencoh> oh, okay
May 27 14:51:11 <bencoh> then you should check easy-debian and the threads around
May 27 14:51:31 <bencoh> iirc they managed to rebase it on wheezy, somehow
May 27 14:51:41 <APic> I broke easy-debian very often
May 27 14:52:25 <APic> Its Unpacking overloaded the System and crashed it and Stuff
May 27 14:52:33 <APic> It has no ionice
May 27 14:52:48 <APic> I will just try to compile a current Kernel
May 27 14:53:22 <APic> Or is that very hard?
May 27 14:54:17 <bencoh> it's not hard (actually the linux kernel is probably one of the most simple and straightforward project to crosscompile ... since there is no target dependencies apart from the toolchain)
May 27 14:54:30 <bencoh> but "modern" kernels will miss a lot of features
May 27 14:56:11 <APic> Oh
May 27 14:56:16 <APic> Then i will just debootstrap oldstable
May 27 14:56:20 <APic> Thanks for the Help
May 27 14:57:01 <bencoh> I'm running wheezy on top of a 2.6.31 kernel daily, btw
May 27 14:57:12 <bencoh> (not on n900)
May 27 14:57:23 <KotCzarny> O.o
May 27 14:58:53 <APic> k
May 27 14:58:55 <APic> =^.^=
May 27 15:05:13 <APic> Maybe someone could tell the Easy-Deb-Chroot people they shall put in a „ionice -c3 nice -n19“ at the hot Phases.
May 27 15:05:26 <APic> (I am too lazy to post a Forum Post)
May 27 15:05:34 <APic> I despise Forums
May 27 15:05:46 <APic> (Puking Smileys 'n' Stuff…)
May 27 15:06:00 <KotCzarny> you can usually disable all smileys'n'stuff
May 27 15:06:44 <bencoh> (I'd love a web2news gateway for TMO as well ... to have a clean newsgroup interface ;)
May 27 15:07:02 <bencoh> (but I think that's not gonna happen ;)
May 27 15:17:12 <kerio> bencoh: why the hell would you run 2.6
May 27 15:18:01 <bencoh> g/44
May 27 15:18:04 <bencoh> woops
May 27 15:30:54 <ecc3g> grr... was trying to resurrect my k6-233 ... linux 4.0 deprecated a whole bunch of drivers for it.  Grr...
May 27 15:36:31 <KotCzarny> :)
May 27 15:36:41 <KotCzarny> just put that thing into the museum
May 27 15:38:37 <Wizzup> ecc3g: I think if you step up to maintain the drivers they can accept them again
May 27 15:39:34 <ecc3g> nah not worth it.  Same problem as why the n900 will be deprecated someday too if it hasn't already been.
May 27 15:40:02 <KotCzarny> ecc3g, truth is most people are forced to use 2.6.x
May 27 15:40:08 <KotCzarny> if not all
May 27 15:40:21 <ecc3g> and 3.4 works fine for my k6-233
May 27 16:05:15 <Sicelo> ecc3g: looks like N900 will only be deprecated by its hardware falling apart (age). http://elinux.org/N900 
May 27 16:18:25 <ecc3g> pretty much it's already deprecated because running 4.0 and having full functionality is impossible just like the k6...
May 27 16:18:42 <ecc3g> though it's easier to work around the k6 because I can just swap the ethernet board with a PCI unit...
May 27 18:51:45 <antranigv> is updating to CSSU gonna fix the calendar problem?
May 27 18:51:58 <antranigv> cz I remember it worked before.
May 27 19:02:09 <Sicelo> which calendar problem?
May 27 19:08:01 <webmind> so uhm, any chance of getting a new kernel on n810 so I can run wheezy?
May 27 19:10:06 <Sicelo> 0.1% i think
May 27 20:36:24 <antranigv> Sicelo: every time I try to add an event from a calendar file I get "invalid file format"
May 27 20:37:20 <KotCzarny> maybe your calendar got corrupted?
May 27 20:37:37 <KotCzarny> ahm, from
May 27 20:37:48 <KotCzarny> then maybe it needs different format
May 27 20:37:51 <KotCzarny> some app log?
May 27 20:37:58 <KotCzarny> start calendar from terminal?
May 27 22:36:54 <antranigv> KotCzarny: let me try starting from terminal, yes. not sure why is this happening.
May 28 02:40:47 <Vajb_> antranigv: u mentioned opening file in notes. So maybe it corrupted it somehow. Try renaming or moving that file to see if calendar creates it again...
**** ENDING LOGGING AT Thu May 28 02:59:58 2015