**** BEGIN LOGGING AT Sun Sep 04 02:59:56 2005
Sep 04 04:51:43 <kami22> hi can anyone tell me how to use .jar files under Unslung?
Sep 04 05:40:36 <fnudd> hi! anyone around with experience of using openvpn on the slug?
Sep 04 10:43:30 <NSLU2-IRC> Nickserv
Sep 04 13:22:02 <eFfeM> hi, is there anybody that can help me config samba with swat?
Sep 04 13:22:34 <eFfeM> I think i did it all, but it prompts for a user/passwd and I do not know how to switch that off (or what passwd to give)
Sep 04 13:24:55 <marceln> ?
Sep 04 13:26:27 <eFfeM> i can run swat, made a share, but when i connect to it windows prompts for a passwd
Sep 04 13:30:12 <marceln> You mean when you want to map a share it's asking for a password?
Sep 04 13:33:02 <eFfeM> yes
Sep 04 13:33:14 <eFfeM> i'm not very proficient in this
Sep 04 13:33:19 <eFfeM> I made the share with swat
Sep 04 13:35:23 <marceln> The problem is that i never use swat myself.
Sep 04 13:35:43 <marceln> Do you use "unslung" with samba 3?
Sep 04 13:35:54 <eFfeM> i haven't either, but I had to move over to openslug and there the linksys web i/f is not there any more
Sep 04 13:36:10 <eFfeM> just want to export a share to windows
Sep 04 13:39:58 <marceln> Can you sent me your smb.conf?
Sep 04 13:41:27 <eFfeM> sure
Sep 04 13:42:40 <eFfeM> hang on
Sep 04 13:45:46 <eFfeM> hm this is nastier than I expected.
Sep 04 13:45:56 <eFfeM> i have no share so cannot get it off that way
Sep 04 13:46:09 <eFfeM> trying a memstick but don't know the dev to mount it on
Sep 04 13:46:17 <marceln> Do you have "ssh" installed?
Sep 04 13:46:20 <eFfeM> yes
Sep 04 13:46:28 <eFfeM> i'm using openslug
Sep 04 13:46:33 <marceln> Just use that to log into the slug?
Sep 04 13:46:48 <eFfeM> i am
Sep 04 13:47:11 <marceln> Please type "find / -name smb.conf"
Sep 04 13:47:43 <marceln> I am not sure were the file is.
Sep 04 13:47:46 <eFfeM> i know where the file is (in /etc/samba) just don't know how to copy it to my pc so I can send it to you
Sep 04 13:48:00 <marceln> Oke. That's simple.
Sep 04 13:48:17 <marceln> Probably you are using windows at this moment?
Sep 04 13:48:22 <eFfeM> yes
Sep 04 13:48:43 <eFfeM> xp
Sep 04 13:48:57 <marceln> Just install "winscp".
Sep 04 13:49:15 <eFfeM> i have that one and it complains that sftp is not running on my slug
Sep 04 13:51:29 <marceln> Use the "scp" mode of winscp.
Sep 04 13:53:01 <case0511> say what does the top green light blinking in green signify
Sep 04 13:54:25 <eFfeM> marceln, i just send you smb.conf
Sep 04 13:55:34 <eFfeM> case0511 there is a page on the wiki that describes this (don't know this by heart)
Sep 04 13:55:54 <case0511> alright, i'll scour it. thanks by the way :)
Sep 04 13:56:24 <eFfeM> marceln the file transfer timed out
Sep 04 13:56:33 <eFfeM> did you see the file ?
Sep 04 13:56:52 <marceln> No. My client doesn't onderstand file transfer. Just sent it to: nslu2@pion.xs4all.nl
Sep 04 13:57:03 <eFfeM> ok
Sep 04 13:58:28 <eFfeM> its on its way
Sep 04 14:00:10 <marceln> 1) smb passwd file = /etc/samba/smbpasswd
Sep 04 14:00:23 <marceln> So the users are in "/etc/samba/smbpasswd"!
Sep 04 14:01:14 <eFfeM> ok, i just want to make a share that is accessible by everyone
Sep 04 14:02:42 <marceln> There is a second line "guest account=guest" so any unknown account is mapped to guest.
Sep 04 14:02:55 <marceln> Is there a "guest" account in "/etc/passwd"?
Sep 04 14:04:04 <eFfeM> yes
Sep 04 14:04:28 <eFfeM> passwordless
Sep 04 14:04:41 <eFfeM> also did smbpasswd -a guest
Sep 04 14:04:47 <eFfeM> and entered return on the passwd
Sep 04 14:05:22 <eFfeM> smbpasswd says:
Sep 04 14:05:22 <eFfeM> guest:502:AAD3B435B51404EEAAD3B435B51404EE:31D6CFE0D16AE931B73C59D7E0C089C0:[U          ]:LCT-431B60ED:
Sep 04 14:05:37 <eFfeM> 502 is the uid of guest in /etc/passwd
Sep 04 14:09:13 <marceln> Well in that case you placed a password in the guest account.
Sep 04 14:09:37 <marceln> I have on "unslung": guest:501:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:NO PASSWORDXXXXXXXXXXXXXXXXXXXXX:[NU         ]:LCT-37D44FF6:
Sep 04 14:10:28 <eFfeM> hmm lets try that
Sep 04 14:15:55 <eFfeM> changed the passwd file
Sep 04 14:16:40 <eFfeM> i now can browse to the slug and see the shares, but if I click on the disk 1 share it complains about that I do not have the right credentials
Sep 04 14:17:00 <eFfeM> doesn't ask for a password any more
Sep 04 14:21:04 <marceln> Ok.
Sep 04 14:21:33 <marceln> I just installed samba on openslug so that i can see how it works.
Sep 04 14:21:52 <marceln> I just sent you the standard config which works.
Sep 04 14:22:16 <eFfeM> tnx
Sep 04 14:22:37 <marceln> But i think your config is working now.
Sep 04 14:22:52 <marceln> Which share did you use?
Sep 04 14:23:34 <eFfeM> disk 1
Sep 04 14:23:35 <marceln> Only "DISK 1" is public.
Sep 04 14:23:39 <eFfeM> yes
Sep 04 14:23:49 <marceln> The second problem is the unix permisions.
Sep 04 14:24:23 <marceln> Check the permisions on "/usr/public/"
Sep 04 14:25:18 <eFfeM> it has mode rwxrwxr-x (so 775) and is owned by guest
Sep 04 14:27:10 <eFfeM> [2005/09/04 21:25:48, 0] lib/username.c:map_username(128)
Sep 04 14:27:10 <eFfeM>   can't open username map no. Error No such file or directory
Sep 04 14:27:28 <eFfeM> this is what is in the log file after i attempt to access the slug
Sep 04 14:27:44 <eFfeM> (it is still on gmt hence the 21:25 iso 23.25)
Sep 04 14:28:22 <eFfeM> in /var/log/smdb.log
Sep 04 14:36:34 <eFfeM> found something on the web stating that I have to change 
Sep 04 14:36:34 <eFfeM> > username map = no
Sep 04 14:36:34 <eFfeM> > to
Sep 04 14:36:34 <eFfeM> > username map = # no
Sep 04 14:36:42 <eFfeM> but that did not work
Sep 04 14:38:42 <marceln> Remove the "valid user" line in the "[DISK 1]" and replace it with "public = yes"
Sep 04 14:39:12 <marceln> AT this moment "guest" isn't a valid user for this share.
Sep 04 14:40:29 <eFfeM> currently valid users says @administrators, @everyone; i'll change to guest
Sep 04 14:41:54 <case0511> where can i change the ip of the nslu2 ?
Sep 04 14:42:36 <eFfeM> case0511, if you are using the std linksys or unslung sw, you can do that via the web i/f
Sep 04 14:42:53 <case0511> well i keep getting a system error via the web interface
Sep 04 14:42:55 <eFfeM> don't know which one it actually is (and I am not running either of these any more)
Sep 04 14:43:16 <eFfeM> case0511 are you on unslung or on linksys sw
Sep 04 14:43:24 <case0511> yep
Sep 04 14:43:27 <case0511> unslung
Sep 04 14:43:29 <eFfeM> marceln, guest didn't make a difference
Sep 04 14:44:05 <eFfeM> hm, you could try to reflash, i hope your config area is not broken
Sep 04 14:44:40 <eFfeM> haven't had this before. the ip address is in the configuration area
Sep 04 14:44:53 <marceln> eFfeM: Just remove the valid user line and add "public = yes"
Sep 04 14:47:20 <eFfeM> marceln added this, this has no effect
Sep 04 14:47:25 <eFfeM> same error
Sep 04 14:48:53 <eFfeM> ehm may have made a mistake, let me try again
Sep 04 14:51:13 <case0511> hmm you wouldnt be using samba 3 with osx there would you eFfeM ?
Sep 04 14:51:39 <eFfeM> nope. xp
Sep 04 14:52:35 <case0511> ah.
Sep 04 14:52:39 <case0511> samba3 and osx == no go
Sep 04 14:52:43 <eFfeM> i now do get a connection
Sep 04 14:52:51 <eFfeM> but when I browse still no access
Sep 04 14:54:23 <eFfeM> this is what i get in the log:
Sep 04 14:54:24 <eFfeM> [2005/09/04 21:52:25, 0] lib/username.c:map_username(128)
Sep 04 14:54:24 <eFfeM>   can't open username map no. Error No such file or directory
Sep 04 14:54:24 <eFfeM> [2005/09/04 21:52:25, 0] smbd/service.c:make_connection(794)
Sep 04 14:54:24 <eFfeM>   woonkamer (192.168.123.4) couldn't find service disk
Sep 04 14:56:56 <marceln> The share is called "DISK 1" not "disk".
Sep 04 14:57:41 <eFfeM> i know, i haven't typed the name, i browsed it from explorer
Sep 04 14:57:55 <eFfeM> browse to the slug, see a share disk 1 and click on it
Sep 04 14:58:37 <eFfeM> windows then says disk 1 is not accessible, you might not have the right credentials (if I translate the error msg correctly)
Sep 04 15:01:41 <marceln> Could you try to add this to your config file:
Sep 04 15:01:44 <marceln> [tmp]
Sep 04 15:01:44 <marceln>    comment = Temporary file space
Sep 04 15:01:44 <marceln>    path = /tmp
Sep 04 15:01:44 <marceln>    read only = no
Sep 04 15:01:44 <marceln>    public = yes
Sep 04 15:02:00 <marceln> I have this share working.
Sep 04 15:02:17 <eFfeM> ok, one sec
Sep 04 15:05:05 <eFfeM> hey, that works for me as well.
Sep 04 15:05:14 <eFfeM> the disk1 section reads:
Sep 04 15:05:14 <eFfeM> [DISK 1]
Sep 04 15:05:14 <eFfeM>         comment = For everyone
Sep 04 15:05:14 <eFfeM>         path = /usr/public/
Sep 04 15:05:14 <eFfeM>         public = yes
Sep 04 15:05:14 <eFfeM>         write list = @administrators, @everyone
Sep 04 15:05:16 <eFfeM>         guest ok = Yes
Sep 04 15:10:42 <eFfeM> marceln, got it!
Sep 04 15:10:56 <eFfeM> apparently samba cannot deal with the space in the share name 
Sep 04 15:11:11 <eFfeM> if I change [DISK 1] to [DISK1] it works like a charm
Sep 04 15:12:20 <marceln> I am not sure about that. I can connect to the standard unslung share "DISK 1".
Sep 04 15:12:57 <eFfeM> yeah, i peeked at the unslung smb.conf file while crafting the openslug one
Sep 04 15:13:08 <eFfeM> could you on your openslug version try to create a share with a space in it?
Sep 04 15:14:37 <eFfeM> it doesn't work for me
Sep 04 15:14:44 <eFfeM> dont know if this is in the config
Sep 04 15:15:25 <marceln> [t e s t]
Sep 04 15:15:25 <marceln>    comment = test share
Sep 04 15:15:25 <marceln>    path = /var/tmp
Sep 04 15:15:25 <marceln>    read only = no
Sep 04 15:15:25 <marceln>    public = yes
Sep 04 15:15:37 <marceln> This share works with 3 spaces.
Sep 04 15:18:11 <eFfeM> hmm. this works for me as well
Sep 04 15:18:50 <eFfeM> can you rename to [DISK 1]
Sep 04 15:18:57 <eFfeM> and keep all the rest the same ?
Sep 04 15:19:55 <marceln> No problem. It just works
Sep 04 15:22:07 <eFfeM> i'm completely flabbergasted. if I name the share [DIS 1] it works, if I name it [DISKY 1] it works, if I name it [DISK 1] it doesn't
Sep 04 15:22:18 <eFfeM> perhaps windows has something cached somewhere
Sep 04 15:23:00 <eFfeM> maybe rebooting the pc would help, don't think I'm going to try that now.
Sep 04 15:23:09 <eFfeM> marceln, I have one Q left:
Sep 04 15:23:32 <eFfeM> If I go to swat it tells me that smbd is not running
Sep 04 15:23:50 <eFfeM> but of course it is as I can access shares now and ps also shows the process
Sep 04 15:23:56 <eFfeM> how can this be?
Sep 04 15:24:44 <marceln> I am not sure.
Sep 04 15:25:27 <marceln> I don't know how swat checks it.
Sep 04 15:26:32 <eFfeM> ok. let's leave that challenge for another time. thanks alot/ontzettend bedankt!
Sep 04 15:26:48 <eFfeM> I've definitely learned a lot.
Sep 04 15:27:29 <eFfeM> catch u later, calling it a day ...
Sep 04 19:22:02 <leeborealis> is there anyone here that can help me with a "undetected drive" problem
Sep 04 19:22:28 <leeborealis> exhausted website resources  :(
Sep 04 19:36:06 <leeborealis> anyone?
Sep 04 19:36:35 <ByronT> define "exhausted website resources"
Sep 04 19:40:32 <leeborealis> my problem is similar to the one described in http://www.nslu2-linux.org/wiki/FAQ/DiskNotRecognized
Sep 04 19:40:40 <leeborealis> but i have both USB_detect processes running
Sep 04 19:40:58 <leeborealis> it mentions that they do not have a solution for my scenario
Sep 04 19:41:04 <ByronT> and you tried out the how to on drive missing condition
Sep 04 19:41:08 <leeborealis> wondering if anyone here would have more info
Sep 04 19:41:13 <leeborealis> yes
Sep 04 19:41:15 <leeborealis> when I df
Sep 04 19:41:18 <leeborealis> no sda1 is listed
Sep 04 19:41:45 <leeborealis> i just noticed that it has mounted my drive in the /share/flash
Sep 04 19:41:52 <leeborealis> i used to mount is /share/hdd
Sep 04 19:41:54 <leeborealis> it*
Sep 04 19:42:01 <ByronT> is it plugged into port2?
Sep 04 19:42:09 <leeborealis> *it used to mount in /share/hdd
Sep 04 19:42:26 <leeborealis> right now it is, but i get the same issue when its plugged into port1
Sep 04 19:42:43 <ByronT> port2 is /dev/sdb
Sep 04 19:43:13 <leeborealis> when plugged into port1, I still get no sda1 on df
Sep 04 19:44:48 <ByronT> can you plug into another linux box to test...
Sep 04 19:45:13 <leeborealis> no linux box available right now
Sep 04 19:45:16 <leeborealis> what would you have me test
Sep 04 19:46:22 <ByronT> see if it mounts there
Sep 04 19:47:03 <ByronT> there are some enclosures that Just Don't Work (tm)
Sep 04 19:55:40 <leeborealis> mine is IO data
Sep 04 19:55:51 <leeborealis> is that list on the slug site or linksys
Sep 04 19:56:16 <ByronT> I've never seen an enclosure list at linksys
Sep 04 19:56:25 <leeborealis> it worked fine with linksys firmware
Sep 04 19:56:51 <ByronT> then it should work with unslung
Sep 04 19:57:41 <ByronT> you can always go back to linksys firmware to get it working there....
Sep 04 19:58:05 <ByronT> and then re-flash unslung and re-unsling
Sep 04 19:58:55 <leeborealis> I
Sep 04 19:59:04 <leeborealis> I've tried reflashing the unslung firmware
Sep 04 19:59:08 <leeborealis> maybe i'll try that
Sep 04 19:59:14 <leeborealis> to linksys i mean
Sep 04 19:59:20 <leeborealis> bbl
Sep 04 19:59:21 <leeborealis> thx
Sep 04 20:16:44 <conradl> ByronT : anyway to shut down a nslu2 over ssh/net/telnet...or ring wife!
Sep 04 20:17:10 <ByronT> sync then halt
Sep 04 20:17:32 <ByronT> from any ssh, telnet connection would do it
Sep 04 20:18:02 <ByronT> only other way is from the web interface - or did I completely misunderstand your question?
Sep 04 20:18:10 <conradl> ok.. i couldn't find a shutdown ..the 101 was poweroff. i am having a issue with a person in thailand.
Sep 04 20:18:40 <conradl> no thats cool i was not looking for the right command.
Sep 04 20:20:57 <conradl> fixed...if the doors not there..you can't even knock.