**** BEGIN LOGGING AT Sun Oct 30 02:59:56 2005
Oct 30 03:47:05 <bikeham> hello?
Oct 30 03:47:34 <bikeham> Can anyone help me get my NSLU2 up and running?
Oct 30 03:47:59 <caplink811_log> maybe, if you describe your problem
Oct 30 03:48:05 <bikeham> Brick
Oct 30 03:48:12 <caplink811_log> define brick
Oct 30 03:48:22 <bikeham> Flashing Red Ready Status light
Oct 30 03:48:30 <bikeham> Ethernet green
Oct 30 03:48:34 <bikeham> Can't Redboot
Oct 30 03:48:59 <bikeham> Can't ping 192.168.0.1
Oct 30 03:50:34 <bikeham> I was happily running unslung and after a reboot, noticed no matter what I did I couldn't see the attached HDD
Oct 30 03:51:35 <bikeham> Any ideas?
Oct 30 03:53:03 <caplink811_log> have you tried to reboot without a hd attached?
Oct 30 03:53:51 <bikeham> I haven't had the HD attached for the last hour, so yes.
Oct 30 03:54:42 <bikeham> I have been going through the FAQ and I don't know what to do if I can't access redboot.
Oct 30 03:55:12 <caplink811_log> have you tried the press and hold the reset button while power on method?
Oct 30 03:55:29 <caplink811_log> to bring the slug in upgrade mode
Oct 30 03:56:00 <bikeham> Yes, but will try again.  I think it is in upgrade mode, I was trying to restore the original linksys firmware
Oct 30 03:58:53 <bikeham> The Ready/Status light is flashing, but I don't know which subnet it is on.
Oct 30 04:16:53 <caplink811_log> upgrade mode is - flashing red/green status led
Oct 30 04:58:55 <bikeham> I'm back
Oct 30 05:11:00 <orda> what is the proper way to change network information on a slug using openslug ? I tried just to use turnup init and typing in the new dns servers, but when I put it on the new network, It never came up :(
Oct 30 05:12:00 <orda> I configured it before I put it on the new network
Oct 30 05:12:06 <jelle> ifconfig?
Oct 30 05:12:07 <orda> and used static
Oct 30 05:12:35 <orda> isn't ifconfig temporary ?
Oct 30 05:13:05 <jelle> hold on...
Oct 30 05:13:07 <orda> heh And I cant use ifconfigm because it would not boot on the new network :)
Oct 30 05:13:34 <jelle> did you check /etc/network/interfaces?
Oct 30 05:14:53 <orda> t looks good
Oct 30 05:15:04 <orda> it*
Oct 30 05:15:48 <orda> So I had to bring it home again, and it boots fine on my network, and it seems that it has the correct dns servers setup for that other network
Oct 30 05:16:13 <orda> it just didn't boot on that other network
Oct 30 05:16:22 <orda> very strange
Oct 30 05:16:51 <jelle> hm.
Oct 30 05:17:04 <jelle> what IP?
Oct 30 05:17:40 <jelle> netmask. gateway
Oct 30 05:17:42 <orda> just a local 192.168.1.70
Oct 30 05:17:58 <jelle> and your work ipsettings are the same?
Oct 30 05:18:06 <orda> allmost
Oct 30 05:18:14 <orda> just the dns servers are different
Oct 30 05:18:15 <jelle> strange.
Oct 30 05:18:23 <jelle> oops, gotta run. maybesomeoneelse...
Oct 30 05:18:30 <orda> oki
Oct 30 05:18:44 <orda> :)
Oct 30 05:19:25 <orda> so.. mr. anyonelse, is turnup init the right thing to do ?
Oct 30 06:06:43 <orda> damn, did anyone answer? my computer decided to reboot
Oct 30 12:04:12 <kami> hi is there anywhere a Howto which discribed how i can cross develop a package for Openslug?
**** ENDING LOGGING AT Mon Oct 31 02:59:56 2005