**** BEGIN LOGGING AT Tue Nov 15 02:59:56 2005 Nov 15 04:18:57 irssi finally works on the nslu2, just make sure perl and glib is installed, afterwards ./configure --with-glib-prefix=/opt --with-perl-staticlib --enable-ipv6 --prefix=/opt Nov 15 04:19:08 and make it on the unslung-devel box Nov 15 05:20:00 caplink811_log: irssi works Nov 15 05:44:33 hello Nov 15 05:48:49 ~botsnack Nov 15 05:48:49 orda: thanks Nov 15 05:49:23 hld: were you looking for irssi? Nov 15 05:49:45 i managed to compile it with ./configure --with-glib-prefix=/opt --with-perl-staticlib --enable-ipv6 --prefix=/opt Nov 15 05:52:21 re Nov 15 05:52:28 no, psybnc with ssl support Nov 15 05:53:05 but i think it isn't such a good idea to run it on the nslu2. even the version without ssl disconnects when there are too many people in the channel Nov 15 05:53:47 ah k Nov 15 05:54:01 for psybnc, i got it to work too Nov 15 05:54:11 at least during configure tile Nov 15 05:54:12 time Nov 15 05:54:32 you got it compiled with ncurse, etc. ? Nov 15 05:54:35 you have to edit tools/autoconf.c and find all /usr/local/lib/ssl etc. and fix those paths Nov 15 05:54:51 irssi is with ncurses yes Nov 15 05:55:06 don't have a development env here... just unslug Nov 15 05:55:17 could you place the psybnc_ssl binaries online? Nov 15 05:55:52 i didn't compile the entire program yet Nov 15 05:56:04 i just checked whether it passed the ssl check Nov 15 05:56:17 ah. okay Nov 15 05:56:20 Byte order: Low Endian. Nov 15 05:56:21 IPv6-Support: Yes, general support. But no interface configured. Nov 15 05:56:21 async-DNS-Support: Yes. Nov 15 05:56:21 SSL-Support: Yes. Nov 15 05:56:21 Creating Makefile Nov 15 05:56:23 [*] Compiling MakeSalt for Encryption.. Nov 15 05:56:26 Using existent Salt-File Nov 15 05:56:28 [*] Compiling Bouncer.. Nov 15 05:57:22 i fooled the precheck thing, now the only thing is to show it to the actual program too Nov 15 06:02:11 re Nov 15 06:02:18 fucking isp... Nov 15 06:26:26 bazz, drop me a line if you compile psybnc ;) Nov 15 06:26:52 i don't think i'll compile it Nov 15 06:27:02 i'm using screen/irssi/bitlbee Nov 15 06:27:06 works nice Nov 15 06:27:14 no need for psybnc ;) Nov 15 06:27:29 heh, i need something that receives dcc's for me Nov 15 06:28:00 at best with ssl support... Nov 15 06:48:47 I compiled psybnc and have it on my slug, using it right now, but I dont know if ssl actually works Nov 15 06:49:06 I could check it out Nov 15 06:57:54 would be nice Nov 15 07:13:30 I have to go for a couple of hours, but Ill check it out later today Nov 15 07:13:57 bb for now Nov 15 07:16:51 thanks orda Nov 15 13:15:04 I'm not good in shell-programming, can you what is wrong here: Nov 15 13:15:11 case $DEVICE in Nov 15 13:15:11 4b8/802/100) Nov 15 13:15:11 echo "test";; Nov 15 13:15:11 esac Nov 15 13:16:25 I think its the second line, but how must it look like? Nov 15 13:18:58 (4b8|802|100) Nov 15 13:19:14 its one string Nov 15 13:24:39 maybe that the string isn't in $DEVICE? Nov 15 13:25:58 Im sure it is, i did a echo $DEVICE before that case and the string is in Nov 15 13:26:02 cause this (bash2.05 deb) works as expected Nov 15 13:26:09 #!/bin/sh Nov 15 13:26:09 export bla=17/18/19 Nov 15 13:26:09 case $bla in Nov 15 13:26:09 17/18/19) Nov 15 13:26:09 echo test;; Nov 15 13:26:12 esac Nov 15 13:28:15 test;; Nov 15 13:28:28 oh wait - that was part of some code.... Nov 15 13:29:02 copyrighted ? uh Nov 15 13:29:40 oh, did some BIG mistake Nov 15 13:29:53 we known Nov 15 13:30:03 ~nick Nov 15 13:30:05 People leaving their nickname as NSLU2-IRC will be ignored ... otherwise we'll end up with 10 nslu2-irc users ... so please change it using /nick newnick Nov 15 14:04:19 grmbl, something very strange is going on... Nov 15 14:05:33 mars-mans? Nov 15 14:05:43 could it be that the nslu crashes when using the paragon ntfs driver when handling large files? Nov 15 14:08:33 nothing impossible Nov 15 14:09:17 hrmpf Nov 15 14:10:33 impartial of the ntfs driver, what happens if you do the same on your ext3 partition Nov 15 14:13:33 morning, Guest2246 Nov 15 14:14:51 Hello, I need help to recover from a bad flash using jtag Nov 15 14:15:48 why do you mean, you have a brick? Nov 15 14:16:00 Good afternoon, caplink811 Nov 15 14:16:08 well ~ugt Nov 15 14:16:16 ~ugt Nov 15 14:16:17 hmm... ugt is Universial Greeting Time. Created in #mipslinux, it is a rule that states that whenever somebody enters an IRC channel it is always morning, and it is always late when the person leaves. The local time of any other people in the channel, including the greeter, is irrelevant. Nov 15 14:16:21 ~thanks Nov 15 14:16:22 caplink811: de rien Nov 15 14:17:17 heh Nov 15 14:17:34 :) What other tricks does capbot do? :D Nov 15 14:17:36 Thanks, Im new.... Good morning to all Nov 15 14:17:51 mwester, /msg capbot help Nov 15 14:18:17 Yes, I've used "eraseall" before the warning was out..... Nov 15 14:19:10 and now you have no chance/luck to catch the redboot promt? Nov 15 14:19:14 prompt Nov 15 14:19:51 I'v got Jtag access, I've loaded Redboot, I've managed to telnet into redboot, I've loaded a new FW and still get a amber blinking LED... Nov 15 14:21:57 hm, dunno, maybe that anybody at the ml http://groups.yahoo.com/group/nslu2-linux/ have any hints or expirience with that topic Nov 15 14:22:27 Thanks for the hint, I'll have a look Nov 15 14:22:41 file x kann nicht kopiert werden: Der Zugriff wurde verweigert. Nov 15 14:23:10 Stellen sie sicher das der Datenträger weder voll noch schreibgeschützt ist und die Datei nicht gerade verwendet wird. Nov 15 14:23:29 or just ask at #nslu2-linux, isn't realy on topic, but the auditorium is much bigger Nov 15 14:23:34 that happes when i try to put files through samba... the curious: 5 files worked, the sixth got this message Nov 15 14:24:19 How can I ask there? Nov 15 14:24:29 target is ext3 or ntfs? Nov 15 14:24:38 ntfs Nov 15 14:24:57 Guest2246, /join #nslu2-linux and ask, but ask not to ask Nov 15 14:25:38 /dev/sda4 239914708 133417448 106497260 56% /share/hdd/data/mnt/ntfs Nov 15 14:25:42 the fs isnt't full Nov 15 14:26:18 Thanks Nov 15 14:28:34 error in samba handling? Nov 15 14:28:49 ing to all Nov 15 14:28:49 [22:18] mwester, /msg capbot help Nov 15 14:28:53 oops Nov 15 14:29:02 394 root 1196 S /usr/sbin/do_umount Nov 15 14:29:07 what's that btw? Nov 15 14:30:18 that's normal, something that handles the hotplug thing Nov 15 14:30:28 ~botsnack Nov 15 14:30:29 orda: aw, gee Nov 15 14:30:32 oops Nov 15 14:30:38 killed it... Nov 15 14:30:39 but i love that quote so much... Nov 15 14:30:39 +ah, uncharted territory = bleeding edge Nov 15 14:30:40 +(otherwise known as "Have Fun!") Nov 15 14:31:15 hld: It seems that the ssl part of my psybnc is not working :( Nov 15 14:31:30 hmm Nov 15 14:31:39 other stuff is working fine Nov 15 14:32:06 same here, exept of ncurses Nov 15 14:32:30 but I don't use ssl, so I wont be fixing it :) Nov 15 14:32:40 I didn't use ncurses Nov 15 14:33:04 just setup to config.h and compiled it with the cross env Nov 15 14:34:07 to = the Nov 15 14:35:21 i think my nslu needs more power... Nov 15 14:37:59 * caplink811 thinks, that 230V~ seems to be enough Nov 15 14:38:39 hehe, meant mhz... Nov 15 14:39:18 i think my configuration would have a great benefit since the ntfs driver consumes much power Nov 15 14:40:43 do you have done http://www.nslu2-linux.org/wiki/HowTo/OverClockTheSlug Nov 15 14:40:51 nope Nov 15 14:40:56 but sounds nice to me Nov 15 14:41:13 Works great! Nov 15 14:41:22 yes? Nov 15 14:41:26 any heat problems? Nov 15 14:42:05 None that I've observed, but my NSLU2's are in the basement where it's always cooler. Nov 15 14:42:36 how many do u got? Nov 15 14:42:42 Three. :) Nov 15 14:42:45 oh Nov 15 14:42:53 you noticed that it's faster? Nov 15 14:44:02 Much faster in building/compiling, also almost exactly twice as fast when verifying md5 sums on ISO CD images. I/O seems to be a bit faster, but I've not tested - but I don't use NTFS either Nov 15 14:44:06 hmm, i can copy a 4,5gb file to the box, but no 7 Nov 15 14:45:27 4.5 or more 4.1 or little less? Nov 15 14:46:00 don't know, why? Nov 15 14:46:46 maybe that there is a smb prob around 4gb Nov 15 14:47:21 hrm, could a new smb version fix it? Nov 15 14:47:31 2^32 is around 4.6 GB, no? Nov 15 14:47:35 dunno Nov 15 14:47:42 encode, ping Nov 15 14:48:21 mwester, nice hint Nov 15 14:48:58 ~tell NSLU2-IRC about nick Nov 15 14:49:25 so it must be the smb server, since this file wasn't a problem on two windows boxes Nov 15 14:50:08 last week there was y guy who had problems with large files (>4gb) and samba on openslug, afair, anybody know who was it? Nov 15 14:50:19 s/y/a Nov 15 14:51:11 imho encod* but i'm not sure Nov 15 14:51:58 but me thinks that is the same issue Nov 15 14:52:13 souns like it, yes Nov 15 14:53:42 maybe that you have to recompile theh samba package with large file support (if this is possible) Nov 15 14:53:56 :/ Nov 15 14:54:05 * caplink811 thinks about bleeding edges Nov 15 14:54:14 hehe Nov 15 14:54:36 caplink811: pong Nov 15 14:54:36 are there specialists for smb problems? maybe in #nslu2-linux ? Nov 15 14:54:45 encode, thanks Nov 15 14:54:55 whats up? Nov 15 14:55:02 are you the guy with the problems on large files and samba? Nov 15 14:55:19 i am the guy that did have that problem Nov 15 14:55:22 did, past tense Nov 15 14:55:29 oooohh :) Nov 15 14:55:30 compiling samba natively did the trick Nov 15 14:55:39 so, hld you wnat to talk to encode Nov 15 14:55:44 s/wnat/want Nov 15 14:55:59 encode, could you help me to fix that on my nslu, too? :> Nov 15 14:56:01 encode, thanls once more Nov 15 14:56:01 i need to figure out how to create a package Nov 15 14:56:11 oh yes, that would be very nice Nov 15 14:56:11 then i could just send you the package Nov 15 14:56:21 but i dont know how Nov 15 14:56:50 isn't there a howto on nslu2-linux.org ?! Nov 15 14:58:42 not sure Nov 15 14:58:43 http://www.nslu2-linux.org/wiki/Unslung/AddAPackageToUnslung Nov 15 14:59:08 hang on, are you running unslung or openslug Nov 15 14:59:13 unslung Nov 15 14:59:21 see, im running openslug Nov 15 14:59:49 but, considering i'm at work and i dont have the time to figure out how to produce a package Nov 15 15:00:07 i'm gonna tar up my source folder, already compiled and everything Nov 15 15:00:11 send it to you Nov 15 15:00:14 untar Nov 15 15:00:15 cd src Nov 15 15:00:17 make install Nov 15 15:00:20 should do the trick Nov 15 15:00:32 okay Nov 15 15:02:56 hld, but on unslung you should have a native compile environment installed, as ByronT-Work mentioned before Nov 15 15:03:11 ooh, yes, good point Nov 15 15:03:32 he's gonna need the program "make" installed Nov 15 15:03:37 so he can run "make install" Nov 15 15:03:52 cap, could you help me setting it up? Nov 15 15:03:53 :) Nov 15 15:04:35 * caplink811 thinks about a new footer, something like +ah, uncharted territory = bleeding edge Nov 15 15:04:35 +(otherwise known as "Have Fun!") Nov 15 15:06:10 hehe Nov 15 15:06:26 hld, 1st, you should read the link above, read it, follow it, install the environment, and then build a small paket, with this ,everything you need is build too, and then you could follow the hints from encode Nov 15 15:06:41 it'd be really nice if the samba pkg for unslung was maybe updated to work...... Nov 15 15:07:06 ahh crap, the archive is 47MB Nov 15 15:07:15 wow, there is a bright light in heaven ;) Nov 15 15:07:15 thats not really gonna work Nov 15 15:07:27 (you know, that way, the whole community can take advantage of your fixes/changes) Nov 15 15:07:28 hi docu guy :) Nov 15 15:08:06 hello Nov 15 15:08:14 i thought the only thing he did is a native compile instead of a cross... maybe someone did already? Nov 15 15:09:11 it's probably more than that - since samba is a known cross compiler Nov 15 15:10:11 likely a configuration in the make... which means that the *fix* might just be an examination of the config for samba under optware Nov 15 15:10:35 afair, its compile nativly too, out from the repository Nov 15 15:11:20 caplink, can you check to see which repo samba is in? Nov 15 15:11:44 someone around here, nailz (?) i think, was telling me that there was an issue with LFS and cross compiling Nov 15 15:12:10 <- is just a tad busy atm Nov 15 15:12:28 myself means the samba.mk from sourceforge Nov 15 15:13:26 so, hld follow the link above, and when you can compile a small package, then you should have a look at make/samba.mk, and the parameters for configure Nov 15 15:13:58 if you're willing to set up the native build environment Nov 15 15:14:01 the link with addapackagetounslung ? Nov 15 15:14:03 i can help you with the rest Nov 15 15:14:12 hld, yes Nov 15 15:14:28 no explantation on how to install the gcc Nov 15 15:14:35 i cant see anything in that howto that describes how to build a packge on openslug Nov 15 15:14:41 1st run will take some hours, cause the compiler is build and the needed environment Nov 15 15:15:05 i havent really figured that part of native compiling out - i took the easy route and just used the official samba source Nov 15 15:15:18 shouldn't be a problem... but again, which tutorial to start?! Nov 15 15:15:36 hld, check out everything, make (as described) the dirs, and then run make wakelan e.g. Nov 15 15:15:39 http://www.nslu2-linux.org/wiki/HowTo/NativeDevelopmentSetup <- that one seems good, no? Nov 15 15:15:54 hld, imho that is outdated Nov 15 15:16:16 now which one? the first doesn't decribe how to setup the gcc, etc. Nov 15 15:17:34 http://www.nslu2-linux.org/wiki/Info/NativeBuildMachine Nov 15 15:18:05 thanks byron Nov 15 15:18:18 np Nov 15 15:18:54 i think i backup my partitions before messing around... Nov 15 15:22:30 that is a good thing, everytime :) hld, so you need to follow 1st ByronT-Work link, then the link above, to checkout the environment, and then build something, so the cross environment is build Nov 15 15:22:49 s/cross/native Nov 15 15:23:23 ja, gemach gemach, bin eben erstmal im dos und backuppe per ghost :> Nov 15 15:23:41 wrong language Nov 15 15:26:13 why are the /etc/hotplug.d/usb/... scripts not called on (re)boot? Nov 15 15:27:50 I think that what I want to is called coldplug Nov 15 16:08:58 GNite all Nov 15 17:16:13 ls Nov 15 17:16:20 oops Nov 15 17:19:52 think i figured out how to build the package using bitbake Nov 15 18:26:10 hi encode, whats going on with your sound? Nov 15 18:44:54 i've given up pretty much **** ENDING LOGGING AT Wed Nov 16 03:00:00 2005